I am having an issues with getting my page setup right. the code below makes excel go crazy and adjusts it to 10% of its normal size and basically every cell is a pagebreak. [Code] If i comment out the MARGIN changes it works fine and adjusts to about 58% of normal size, but i need to change the margin sizes or else it prints out a bit too small. any ideas?
View 1 RepliesSo i have a tab control that shows the entire url of a website - and so to control it i set the tabs to be fixed however all i see is http:// and then the first 2 letters of any site, this really doesnt help if you want to see what site your on..so is there a way to adjust the size of the tabs or is there a way to get rid of the url...
View 1 Repliesis it possible to adjust the size of the colordialog prompt? is it possible to adjust the size of the sample color boxes within the colordialog prompt?
these are both for vb.net in winforms
Can we adjust the size of a toolstripbar? I docked my toolstripbar on top of the form and been trying to resize cause I see it a little bit shorter and want to adjust its height and can't be adjusted.
View 1 Replieshow I can resize the pane and the content adjust to the new size?I've tried to do this Panel_Menu.Width = 200 but the content does not resize to the new size. i want to see the information of 0 ,0 0 on on on , 7,5 IRE but I want the new size of the panel see all the information but in a smaller size. the problem is that when the user presses a button panel must be made smaller but has all the content?
View 2 RepliesI have 3 listboxes on my form. Sometimes the items I add to the listboxes are cut off within the listbox since they are too long. In the case of that, I want all the listbox sizes to expand according to the length of the text. Once the size of the listboxes expands, I want the size of the form to expand to avoid any problems. How do I do this?
View 3 RepliesI am developing an application using excel automation.The worst thing is the client's side doesn't have excel installed.What is the solution for this case?
View 17 RepliesI have written an automation addin in Excel with C# (addin.dll). To use the addin, I need to 1. register it using "regasm /codebase c:...addin.dll"2. select in ExcelOptionsAddInsExcel AddinsAutomation the respective addin from the list
I would like to automatize 1) and 2), so that the user just needs to run an exe-file in order to use the addin. 1) should be no problem, but how can one automatize 2)?
Ok basically what I need to do is the following:Read FirstExcelDoc (attached)For every row in that: Retrieve data from sql server db based on info in the Orange columns of FirstExcelDoc Let's say I retrieved data elements A, B, C, D, and E from sql server. Then I need to enter those same data elements A, B, and C in another excel spreadsheet (which has formulas etc) After inputing A, B, and C in that spreadsheet, read a couple of calculated fields and compare those results to data elements D and E retrieved originally from SQL Server DB. Finally, output the results in the Blue columns of the FirstExcelDoc spreadsheet for that row.Loop through and do the same thing for row 2 of the FirstExcelDoc and keep on until you see "END TEST" in the FirstExcelDoc.
I'm looking for a method of doing this efficiently. I have read several articles over the past few days as well as those from Mike R. but just need some direction to get started on this.To start of I'm looking for whether to read the entire FirstExcelDoc spreadsheet or just read the info for first policy number(2nd row) and process it and write out the blue column info for that row and then loop through and come back and read the second policy number (3rd row) etc... Please attach a code snippet for either way of reading the data.
I'm using excel via interop in application.Sometimes users kill application that created excel instance and that results in excel instance sitting in memory without any chance of disposing it.First I tried to tackle this using ROT(running object table) looks like not all instances of excel are registered there.Than I tried to somehow mark excel process after it is started via interop.[code]This works as long as excel is visible but in my case excel window is invisible.All I need is to somehow mark process that started via automation with the parent PID, so that later I can kill it if parent does not exist.
View 19 RepliesI have been pulling my hair out trying to fix this.
[Code]....
We have a vb program which is run on our server by scheduled task every day. The program opens about 30 excel files, refreshes the data connections, pivot tables and then saves the document in another location.
This may run fine for a couple days but sooner or later the process starts crashing, usually with this error: RPC_E_SERVERFAULT.
My question is, Is it expected that continually opening/closing/refreshing workbooks will inevitably cause the Excel object to crash at some point.
I'm having an issue where my excel.exe process doesn't close until I close my .net application. I'd like to avoid using Process.Kill() if at all possible.
Code:
Private Sub WriteRowsToXls(ByVal rows As DataRowCollection, ByVal xlsPath As String, ByVal showStatus As Boolean, Optional ByVal AddTotals As Boolean = True)
Dim xlsApp As New Microsoft.Office.Interop.Excel.Application
[CODE]............
This method references a couple of other methods I use for repeated formatting tasks, I'll include those methods below. (I added the FinalReleaseComObject into the other methods after reading Mike's thread but the issue persists)
Code:
Private Sub SetRangeValidation(ByVal rng As Range)
With rng.Validation
.Delete()
[CODE]..............
Method SetRangeAllBorders does about the same as these other methods but my post is too long to add it. The only other things not shown in these code snippets are a few string variable that are defined in the class, studentWS, studentsWSPW, paymentsWS and paymentsWSPW My App creates an instance of the class, loads some data, runs the method above, and then sets the class to nothing. I'm using .NET 3.5 automating Excel 10
I'm trying to upgrade a VB6 app to VB 2008. I have read the article in the tutors corner about automating Excel from VB but I cannot get it to work. Heres what I have done:
1) set a reference to the Microsoft Excel 12.0 Object Library
2) Added "Imports Excel = Microsoft.Office.Interop.Excel" to the top of the module
3) in a routine I have added: Dim X As New Excel.Application Here's where I get an error: Error 75 'Application' is ambiguous in the namespace 'Microsoft.Office.Interop.Excel'.
I am writing a program that loops through all of the sheets in an Excel workbook and saves each sheet as its own workbook. It turned out to be a bit trickier than I expected, since the Sheet.Copy method creates a strange object (see here for the MSDN discussion that I believe is relevant: [URL]. Anyway, I found a Stack Overflow post [URL] that got me to where I am, which is essentially complete, outside of one hanging EXCEL.EXE process that is left after the program completes, which I believe is a result of the sheet.copy method creating a new workbook (potentially a new application as well?). The other thing I run into, which I believe is related to this, is that even though I have my application set to visibility off, when I run the program, excel still opens up and is visible going through the steps.
Here is my code:
Code:
Imports System.Data
Imports System.IO
Imports Microsoft.Office.Interop
[CODE]...
Now I think the problem comes from the end of the loop, where I try to close the export file and the new worksheet it creates:
Code:
'close excel and release com objects
System.Runtime.InteropServices.Marshal.ReleaseComObject(exportsheet)
exportsheet = Nothing
xlApp1.Workbooks(fileNames(counter - 1)).Close(False)
I can't figure out what to do to release the `ComObject` for the new worksheet that is created. I have been trying all sorts of things, but it always throws a COM error when I do it and if I try to define it as nothing (like I do with exportsheet) is says that it is read only by default, so I can't do it. It seems like it should be something as simple as: System.Runtime.InteropServices.Marshal.ReleaseComObject(xlApp1.Workboo ks(fileNames(counter - 1))) But that is not the case. I have tried a few variants of this and I am thinking it has to do with the MSDN link above, but I can't quite sort out what to do. So the code works for my purposes, outside of leaving one EXCEL.EXE after it is done. As far as a test file, I am just using an Excel file with 3 sheets and I put some information on each and change the sheet name, so it is easy to see if it is working or not.
I use the following code snippet
Dim exlapp As New Microsoft.Office.Interop.Excel.Application
Dim xlWorkBook_new As Microsoft.Office.Interop.Excel.Workbook
Dim strOriginal As String
strOriginal = Server.MapPath(Request.ApplicationPath & "/Attachments/") & "abc.xls"
xlWorkBook_new = exlapp.Workbooks.Open(strOriginal)
The code hangs in the last line. It works fine in the development environment. i deployed in windows server 2000 ,where I get this issue. the browser goes half way and throws the below exception after some time
[Code]...
I have set the identity impersonate to true in web config. This should be mostly an access rights issue.I have even provided access rights for the "everyone " user in the excel file and as well for the interop component. Please post ur valuable comments.
We have a VB 2005 program that reads data from a database and builds an Excel output file to be emailed. This works fine from my computer but when we put it on the server it fails on the Excel functionality.
The error is: Unhandled Exception: System.Runtim.InteropServices.COMException
Although Excel is not installed on the server we did also build a Setup program to install our program. It copies the Microsoft.Office.Interop.Excell.dll to the server folder with the exe.I thought the setup program should register the Excel DLL and the program should work even if the server does not have Office or Excel installed.
I just learned automation in Word. I had a document that started out as 88kb but after automation (19 fields/check boxes)it is over 1MB. Another, document I automated went from 27kb-32.
View 1 RepliesIt appears that when one creates an instance of Excel, using CreateObject, (Late binding), the suggested Excel closing function (with GC.collect etc) does not work. I have tried several suggestions, and the only one that works is process.kill method. Do you see any problem in using this? BTW: the reason we are using late binding is that we cannot use Office PIAs....not sure which version of Office would be installed on the client site. We work with O2003, but the client might still be at 2000 or 2002.
View 7 RepliesI'm working on a vb.net console app that opens a number of spreadsheets one by one, reads in a couple cells and closes the file. Some of the spreadsheets have formulas that Excel recalculates when I open the file, and I'm getting a dialog box asking me if I want to save changes to the spreadsheet when I close it. Message: "Do you want to save the changes to myfile.xls? Microsoft Office Excel recalculates formulas when opening files last saved by an earlier version of Excel".
How do I automatically decline that dialog box?
Dim newCBD As New CBD
Dim xlApp As Excel.Application
Dim xlWorkBook As Excel.Workbook
Dim xlWorkSheet As Excel.Worksheet
[Code] .....
I know that there are millions of posts about this already but I cant seem to find one that mirrors my issue. I am using VS2010 and want to automate excel and I'm trying to work through the example here.
MS Tutorial The problem is when I go to add the reference as mentioned 3.Add a reference to the Microsoft Excel Object Library. To do this, follow these steps: -On the Project menu, click Add Reference. -On the COM tab, locate Microsoft Excel Object Library, and click Select.There is no such reference available.
know if this is the right way to automate excel with VS2010.If it is could someone please let me know why I dont have the COM option for excel. im wanting to write in VB.net but if someone has an example in C# that would be fine. I have tried implementing automation using the Microsoft.Office.Interop.Excel.Application dll but i get the following exception when I try to create the excel application.
This line generates the error. EXL = New Microsoft.Office.Interop.Excel.Application()This is the exception
Retrieving the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG))
when the worksheet is built i get the error message "Object reference not set to an instance of an object.".Here is my code:
Code:
Dim myXLApp As Excel.Application
Dim myXLWbs As Excel.Workbook
Dim myXLSht As Excel.Worksheet
[code]....
I am trying to automate excel. And creating excel object as oExcel = CreateObject("Excel.Application") And trying to close/kill(Kill ) the Excel in Process window using
For Each P as Process In Process.GetProcessByName("Excel")
if p.MainWindowHandle.ToInt32 == oExcel )
p.kill
end if
Next
But the P.MainWindowHandle.ToInt32 is always 0
I have tried this one , Which works for simple methods and not for complex methods
I am creating a new software with visual studio 2010 using the program language visual basic .NET, well in that software I create a new file in excel 2007, my question is because I do not know how I can create a combobox with data of my database inside, [code]
View 2 RepliesI work for a financial firm doing vb.net work.I open an excel doc and populate it using calls to range...i however dont dim the range...I call xlsSheet.Range.ValueI have about 30 ranges i update in this method before printingdo i need to set the .Range.Value to Nothing in order to close the excel.exe
View 9 RepliesWhen connecting, I am getting the error 'Provider is not specified and there is no designated default provider.'[code]
View 4 RepliesI would like to keep part of an Excel workbook open to the user (including some VBA code) while protecting other code. What I hope to accomplish is to rewrite some of my code from Excel VBA in VB.Net and compile it into a DLL which I can then call from Excel VBA. I want end users to be able to modify most of the code in the module, but some of the process should never be touched. Say I have an array in VBA
ArrONE(1 to n, 1 to n)
I would like to pass this through into a DLL and return a new array back to VBA:
ArrTWO(1 to n, 1 to n)
1) What are the best resources for VB.Net?
2) What are some main differences between VBA and VB.Net code
3) I have read that VB.Net doesn�t handle Variant data types, which (as far as I know) is a requirement to perform matrix multiplication in Excel VBA. Any detail on this issue would be of use.
4) VB.Net test environment? I often use msgboxes or simple subs printing to a spreadsheet to test my code in Excel VBA as I go to make sure everything I code is working properly before advancing. What would be .NET equivalents.
5) How to compile VB.Net into a DLL
6) How to call a DLL from Excel VBA
7) What effect will this have on the speed of my procedure?
I am trying to write data to an excel spreadsheet. Simply just todays date and the value of textbox1. I can successfully write it to excel, but how do I get it so each time the application runs it writes the data to the next available row?? I know there must be some loop involved but am having trouble with the coding..
this is what I have so far.
Code:
Imports Microsoft.Office.Interop
Imports System.IO
Imports Excel
[Code].....
The following code is working with two exceptions: The ** are lines were a message box will appear saying that "book2.xls is already present. Do you want to save as? " I am not sure how to fix this. I would be interested to know if I am missing something or if there is a better way.[code]
View 7 RepliesI have done quite a bit of research on this issue and haven't came up with anything definitive yet. I am having issues with Excel randomly getting ComExceptions while writing out reports. I am using a Visual Basic 2005 (framework 2.0) console application to create these reports. The problem has been difficult to figure out because it occurs in random places while writing out reports so I can't catch the error to see the problem. I have looked through the differing items that it breaks on and there is nothing odd about them that would cause any of these problems.
[Code]...