So i have a tab control that shows the entire url of a website - and so to control it i set the tabs to be fixed however all i see is http:// and then the first 2 letters of any site, this really doesnt help if you want to see what site your on..so is there a way to adjust the size of the tabs or is there a way to get rid of the url...
View 1 Repliesis it possible to adjust the size of the colordialog prompt? is it possible to adjust the size of the sample color boxes within the colordialog prompt?
these are both for vb.net in winforms
I am having an issues with getting my page setup right. the code below makes excel go crazy and adjusts it to 10% of its normal size and basically every cell is a pagebreak. [Code] If i comment out the MARGIN changes it works fine and adjusts to about 58% of normal size, but i need to change the margin sizes or else it prints out a bit too small. any ideas?
View 1 RepliesCan we adjust the size of a toolstripbar? I docked my toolstripbar on top of the form and been trying to resize cause I see it a little bit shorter and want to adjust its height and can't be adjusted.
View 1 Replieshow I can resize the pane and the content adjust to the new size?I've tried to do this Panel_Menu.Width = 200 but the content does not resize to the new size. i want to see the information of 0 ,0 0 on on on , 7,5 IRE but I want the new size of the panel see all the information but in a smaller size. the problem is that when the user presses a button panel must be made smaller but has all the content?
View 2 RepliesI have 3 listboxes on my form. Sometimes the items I add to the listboxes are cut off within the listbox since they are too long. In the case of that, I want all the listbox sizes to expand according to the length of the text. Once the size of the listboxes expands, I want the size of the form to expand to avoid any problems. How do I do this?
View 3 RepliesI noticed that when using a single letter as the title on a tab of a Tab Control , the tab is bigger that it should . Look on this example :
The above Tab Control behaves normally because the text on each tab is sufficient to keep it big enough . The lower Tab Control , however , has its tabs too big . Is it possible to reduce its width ? I saw there is an ItemSize property of the Tab Controls , but unfortunately I can only modify the height of the tabs . No matter what value I set for its width , the width remains always the same (and larger than it should) ...
Is it possible to customize the tab control such as insert an image in front of the text or increase the size of the tabs?
View 2 RepliesI was wondering if there was a solution to replacing the tab control's tabs with custom tabs made in Photoshop. I know there are plenty of super expensive programs that can do it, but I was wondering if there was a way to do it programmatically. I was thinking that maybe it could linked in some way with a .DLL?
View 1 RepliesMy code is basically a file parser/editor and it handles most files fine as they hold a handful of records concerning family members. However there are a few files that crash when trying to deal with them. Here is the problem.Each family member record creates 3 tabs that hold an average of 3 group boxes each. Each group box holds an average of 3 text boxes.So each member record creates 3x3x3 = 27 text boxes and some files get up to 289 family members which = 7803 text boxes.
The problem is the rare file with 400+ member records = 10,800 text boxes which causes a crash due to using up all the window handles. Each member has a separate tab page (with 3 subpages) but really only a dozen or so member pages are visible in the GUI with scroll arrows to move through them so I was thinking of somehow making the GUI a scrollable window so the tabs get built, displayed and disposed as the user scrolls left and right through the member tabs.
The files are parsed into a 3d list DataList(x,y,z) where x is the page number, y is the group box number and z is the text box number. So all the data is available. The code then traverses MyList and builds GuiList(x,y) where x is the page number and y is the groupbox number with all the textbox.text linked to MyList(x,y,z) locations so all text changes are reflected in the MyList.
I already have a memberCount variable and I am thinking of building, say, the first 30 member tabs with the middle 10 being visible in the GUI. If the selected tab > 20, then dispose of the first 10 tabs and create tabs 30-40.I am thinking I will keep all the member tab pages so I don't have to deal with inserts and indexing problems but just dispose all the group boxes and text boxes for tab pages out of view. I already have a deep clone sub that clones members when the user wants to add a new family member and I am thinking I will have to add something similar when a tabpage is passed in for disposal, it traverses and disposes each text box, then disposes the group box for each group box on the tab page.Additionally, another routine will rebuild the group boxes from the data held in MyList(x,y,z) when a tabpage(x) is passed in.
Now all went well about from using the structure correctly. The working of the structure was perfect. How ever i missed Two important issues. The structure needed a fixed size of 10 items (9 in programming terms starting from 0) And also out of the 5 items allowed to be chosen as one of the member types for the structure a limit of 5 items of that particular type.
[Code]...
i learned how to adjust and use sql server 2005(create database , table , persmissions,) now i want to creata a windows application with Database(sql server2005) and VB.NET 2008.could you give a link , tutorial , ebook , article ,moive to give me good information how to use sql server in vb.NET?
View 3 RepliesI just moved to VB 2010 Express. PrintForm works, but the image prints with a large left margin and runs off the right edge of the page.[code]...
View 2 RepliesI have a MAC 24" wich I like because I have it working as a Microsoft XP.I make several programs in VB6 using most of the screen (about 80% width).But I have several others PCs from 20" to 11".I'm trying to find an automated system to adjust the form, listboxs, etc., to the smaller screens.
View 6 RepliesIs there any easy way to adjust a width of TextBox in this way:
- minimum width is 80,
- maximum width is depending on font size and number of characters?
The textbox is read only.
I wanted to insert a translation:
I have a UserControl in panel (load at runtime). When I change the size of the window, customize the size of the panel (using "Anchor"). How to adjust UserControl in the Panel?
UserControl.size unavailable from Form
UserControl.size can change only from UserControl?
I am using Visual studio 2008 and I need to be able to adjust a font size using an expression.So far I have,
IIf((Len(First(Fields!CardID.Value, "data"))> 30), "12 pt", "72 pt")
I know I have to reference the LEN variable to get the total character size, but I'm not sure how.
How can i adjust the volume through vb.net codesomething really simple (if only in C#, that'll work too)
View 2 RepliesIs it possible to adjust monitor screen brightness [usually do via [fn]+F7/F8] via VB.NET?
View 9 RepliesIs there any way to adjust audio volume directly using .net?
I can only find C++ coding which, sadly means nothing to me.
I would like to be able to record the current Audio Volume setting, change it (up or down), play a *.wav file, then return it to it's original level.
I am using a image-list to show images in a list-view. So far I am able to display all the images in the image-list but spacing between each image is very big. So I used the Send Message method which gave rise to another problem. Now when I click or move my mouse over(hot tracking enabled) any image the image becomes invisible. How can I solve this problem ?
[code]...
After Mouse-Move:Also I have this big left margin although listview margin is set to All = 3 The First column of Images is not being displayed !!!
How can I adjust the icon quality on a tool bar?
Below is the code I am using to add a tool bar and add the icon to the button. I am having a problem with the quality of the icon. The icon is 32X32 and has looks good viewing in windows explore. When it is viewed in the imagelist the quality is very poor. What can I do?
Code:
Dim tsView_ZoomIn As New ToolStripButton("")
AddHandler tsView_ZoomIn.Click, AddressOf ZoomIn_Click
tsView_ZoomIn.Image = ImageList1.Images(0)
[Code]....
Is there a way to adjust the opacity of a single PictureBox?
I want to be able to fade of any one or more of nine images on a form, maybe all but one say, to emphasis the one or more of those images that remain. I can't find any reference to an opacity value for PictureBoxes.
I've been digging around but I can't seem to find anyway to adjust the volume controls (the windows general ones) using VB .NET.Basically, I want to make a program that's always on top that allows me to changemute the microphone and the other volume values on a specific device - not necessarily the one set as default.
I got this weird feeling that I'm missing something quite simple but I simply could not find anything. I saw some media players and such but nothing similar to what I was looking for.
I have a boolean condition that I want tthe program to recognize changes when they occur. Currently in order for the program to recognize a change I must restart the program.I have tried using a public timer but that didn't work.
Specifically.....
D1A.Close()
D1A = File.OpenText("MEASURE UNITS.TXT")
D1B = CStr(D1A.ReadLine)
[code]....
I am re-writting the text file "MEASURE UNITS.TXT" labeled (D1B). Depending on this boolean equation different options become available in other parts of the program.I need the program to re-adjust the boolean equation on the fly.
I'm trying to make a utility that will fade out the system volume (for when I fall asleep listening to my music). In XP and prior, controlling the system audio was very simple, however, in Vista and 7, I can't figure out how to do it. Because in Windows 7 each application has it's own volume control, lowering the volume doesn't affect the system overall - only the current app. Can anyone point me to a resource how to do this? Every forum posting that I've found on this topic is about XP, and doesn't work under newer versions of Windows.
View 2 RepliesI am trying to create a basic application that will allow me to open a .wav file and let me adjust the volume of the actual file: like raise the volume by 30% or 10% or some type of other measurement.
I'd like to then re-save the .wav file with the adjust volume.
Is there any way to adjust master audio volume directly using .net?
I can find C++ coding which, sadly means nothing to me. There's also quite a lot out there for VB4, 5 and 6 but I can't get any of that to relate to .net. Most of those seem to want to invoke the 'Slider' via the mouse which is not what I'm after.
I would like to be able to: -
Record the current Audio Volume setting,
Change it (up or down),
Play a *.wav file, then
Return it to it's original level.
I've had some success with 'AxWindowsMediaPlayer' but only with it's own increase / decrease functions. I can only get it to increase the volume as far as the main system volume is set, so if that's at zero I get no output at all. As for part one of my requirement, record the current level, I've got nowhere with that at all. I tried putting the one file I want to use in resources but can't find how to access it, I have had to put the file in a folder and call it from there, it works but it seems a little crude.
Is there any way to adjust master audio volume directly using VB.NET ?
I can find C++ coding which, sadly means nothing to me. There's also quite a lot out there for VB4, 5 and 6 but I can't get any of that to relate to .net. Most of those seem to want to invoke the 'Slider' via the mouse which is not what I'm after.
I would like to be able to: -
Record the current Audio Volume setting, Change it (up or down), Play a *.wav file, then Return it to it's original level.
I've had some success with 'AxWindowsMediaPlayer' but only with it's own increase / decrease functions. I can only get it to increase the volume as far as the main system volume is set, so if that's at zero I get no output at all. As for part one of my requirement, record the current level, I've got nowhere with that at all. I tried putting the one file I want to use in resources but can't find how to access it, I have had to put the file in a folder and call it from there, it works but it seems a little crude.
I'd like to adjust Report field height at run time.In the 2nd image, at the 3rd and 4th row of "Wine" column, if the data length is enough for a line, I'd like to adjust its height into a line (And also bottom line object be followed by it). Otherwise, let it be two lines. Please share me which property I'd set.
PS: In page header, I use box object. But in Details section, I just use line object because in report footer, I need to show Total amount. If I use a box in these three sections, there is the box is expanded the whole page without having detail rows at the last page.