I wanted to insert a translation:
I have a UserControl in panel (load at runtime). When I change the size of the window, customize the size of the panel (using "Anchor"). How to adjust UserControl in the Panel?
UserControl.size unavailable from Form
UserControl.size can change only from UserControl?
I want to add a usercontrol to a panel. My code does not work: Panel1.Controls.Add(uc1)
View 1 Repliesis it add control to a form and add control to a usercontrol is using same method like me.controls.add(newpanel)?im a little bit confuse here because that way is not working. im trying to add a panel, to a usercontrol at runtime. the usercontrol is also added at runtime. for e.g. i have click add bar menu, than a usercontrol appear. then, when the usercontrol is selected and i click on add note menu, it will add a panel that contain labels to the usercontrol. this is what i have done. the 'me' is the usercontrol and i put this code under that usercontrol load event.
[Code]...
i have a panel. the autoscroll is set to true. and i have the menu called "add bar". when user click on it, the usercontrol will appear. but different placed. so there will be more that one usercontrol. i want to do the usercontrol y location is increase when the location x is more than 600 for e.g.
If x > 600 Then
y += 200
x = 0
End If
the code above is work, but the problem is, why when i scroll down, and click on "add bar" the value of y location is not same as the previous usercontrol, it should be same on y because it is not yet reach the codition x > 600.
Is there any way you add usercontrol to a panel at a time...i am using this code..
Dim Project as New Usercontrol
Panel1.Controls.Add(Project)
Panel1.Controls.Add(Project)
And it adds only 1 user control and edited text in that user controls instead of creating a new usercontrol...
I need to center the red panel in the middle of the dark grey panel, when you resize the form the red panel should be in the middle, and the red panel can't be resize, anyone have a code or property to do this?
View 2 RepliesI have MainLayout.master that has UC_Menu.ascx on it. I have a page named Customer.aspx that uses MainLayout.master. Customer.aspx also contains a UserControl named UC_Details.ascx.How can I have UC_Menu.ascx call a function that is in UC_Details.ascx with this scenario?
View 3 RepliesI have a Windows Form frmMain() holding seven more-or-less unrelated UserControls, ucFlopsy", "ucMopsy", "ucCottontail", etc...I say "more-or-less" because each of the seven UC has three similar public read/write properties:
IsLocked (a boolean indicating if the following two properties are "Locked")
IsLockedID (if IsLocked=True then IsLockedID is an integer)
IsLockedName (if IsLocked=True then IsLockedName is a string)
[code].....
I have a Windows Form that contains a custom control container as a UserControl. For the sake of this question, this custom control container is called Dashboard. This container called Dashboard contains numerous other controls depending on their permissions. I need to raise events that are contained on these controls through the Dashboard control and over to the Windows Form.
How can I bubble up the event? I'm using VB.NET for this project, but can convert C# into VB.NET.Also, to complicate matters, the main Windows Form is a VB6 project. So, I'm using the InteropFormsToolkit to accomplish this.
I have two UserControls on a MasterPage. DataEntryUC contains several TextBoxes and DropDownList. NavSaveUC contains navigation buttons. When the user clicks on a navigation button, I will be saving the data entered into DataEntryUC from the NavSaveUC UserControl.
I have a couple of tables in my DB that contain stored procedure names, control names, control types, SqlDbTypes, etc.... that correlate with DataEntryUC.
How do I reference a text box that is on DataEntryUC from NavSaveUC?
I have been working on the following code from NavSaveUC with no luck.
Dim MyControlName = "txtFirstName"
Dim MyControlType = "TextBox"
Dim MyStringValue as String
[Code]....
I have a usercontrol that has a main form and calls another form within the usercontrol to get some data from a database that allows the user to select some items from a CheckedListBox control on the sub form. I want to pass the selected items from the CheckedListBox back to the main form and display the results there. I have a public property called DBList of type List(of String) on the main user control. If I create a reference to the usercontrol form the second form within the usercontrol I get a new instance of a user control. All I want to do is set the property on the usercontrol and close the secondary form. How do I reference the usercontrol from the form within the usercontrol?
Code in UserControl:
Public Property DBItems() As List(Of String)
Get
Return DBItems
[Code]....
I would like to add an effect where a panel sweeps out of the way to make room for another panel. This is sort of like a sliding effect, and I think at one point in time this could be seen on Apple's website under their product pages. I came up with some code, but it isn't working.
[Code]...
When a user is editing a given piece of data, they're allowed to add messages/comments. These are stored as child records in a SQL database. Clicking on the Add Message button brings up a panel (pnlMessage) courtesy of the AJAX ModalPopup Extender. This takes some input and, when the "Send Message" button in the panel is clicked (I learned the hard way to NOT make that the 'OkButton' property), the message is stored in the database and an email is sent to the intended recipients. No problem there.
However, I need to be able to allow the user to add new email addresses (so long as they are registered in our database). I have another ModalPopup / panel combo (pnlSearch) that's tied to a button on the previous panel (pnlMessage).
The user is supposed to be able to add an email or click on a search button to populate a list to choose from.
The pop-up panel (pnlSearch) comes up just fine, but clicking the "Lookup" button (which instigates the search and returns a collection of records that the user is supposed to pick from) closes the panel.
Previously, I ran into the problem of having the Button.Click event never firing when I put the Button into the "OkControlID" property (the CancelControlID works fine since I don't want to do anything). Removing the "OkControlID=Button" line allowed it to work perfectly with the Button.Click event firing as expected.
So now I have the Search panel with a button for "OK" and a button for "Search" - but the panel should stay up and visible after the Search.Click does it's thing. Am I missing some property that basically says "don't close the panel when this button is clicked"? Of course, if I bring up the panel again in the same session, the results from the previous effort are there (the search results).
I have a TopBar, A LeftBar, A VScrollBar, A HScrollBar and a Panel inside a SplitContainer Panel.The issue I'm having is that when my SplitContainer Panel is small enough to enable one of the ScrollBars, I will slide the ScrollBar and then when I resize the Split Panel, my Panel1 is staying where I scrolled it too.I'm having troubles thinking of the correct code to fix this.
[Code]...
I was trying to move some dynamic control within the parent container like panel or a group box how do i do that?
View 12 RepliesI'm working on a visual studio 2008 VB.Net project (.net framework 2.0), and am having some trouble with the Panel control using a fixedsingle border. As a small example of the problem, suppose I have one Panel2 contained inside of Panel1. If the Left position of panel2 is set to 0 (meaning it's border is up against the left edge of Panel1), the left border will show as bold, and slightly indented.
<Global.Microsoft.VisualBasic.CompilerServices.DesignerGenerated()> _
Partial Class Form1
Inherits System.Windows.Forms.Form[code].....
What I'd like to see is just a single line, not bold or indented, where the two panels borders are equal.Is there a property or custom paint technique I could use to achieve this behavior?
i learned how to adjust and use sql server 2005(create database , table , persmissions,) now i want to creata a windows application with Database(sql server2005) and VB.NET 2008.could you give a link , tutorial , ebook , article ,moive to give me good information how to use sql server in vb.NET?
View 3 RepliesI just moved to VB 2010 Express. PrintForm works, but the image prints with a large left margin and runs off the right edge of the page.[code]...
View 2 RepliesI have a MAC 24" wich I like because I have it working as a Microsoft XP.I make several programs in VB6 using most of the screen (about 80% width).But I have several others PCs from 20" to 11".I'm trying to find an automated system to adjust the form, listboxs, etc., to the smaller screens.
View 6 RepliesIs there any easy way to adjust a width of TextBox in this way:
- minimum width is 80,
- maximum width is depending on font size and number of characters?
The textbox is read only.
I am using Visual studio 2008 and I need to be able to adjust a font size using an expression.So far I have,
IIf((Len(First(Fields!CardID.Value, "data"))> 30), "12 pt", "72 pt")
I know I have to reference the LEN variable to get the total character size, but I'm not sure how.
How can i adjust the volume through vb.net codesomething really simple (if only in C#, that'll work too)
View 2 RepliesIs it possible to adjust monitor screen brightness [usually do via [fn]+F7/F8] via VB.NET?
View 9 RepliesSo i have a tab control that shows the entire url of a website - and so to control it i set the tabs to be fixed however all i see is http:// and then the first 2 letters of any site, this really doesnt help if you want to see what site your on..so is there a way to adjust the size of the tabs or is there a way to get rid of the url...
View 1 RepliesI just discovered the joys of UserControl's and I was wondering if it is possible to populate the usercontrol with data from a database in the UserControl's Form.Load event instead of the form the userControl is placed on. I feel it would make using the control a lot easier if it just populated itself without anymore code.I tried it with a ListView but it gave me a bunch of errors, so I didn't know if it had to be done a certain way or if it was just one of those things that doesn't work no matter what.
View 8 RepliesThis is for a mapping/plotting program.
t.panel is the main panel and it has too much content to fit in one screen so there are scroll bars. x.panel contains the horizontal scale for the data points in t.panel. I drew the scale using a bitmap and set it as x.panel's background.
Setting x.panel's horizontalscroll.value = t.panel's horizontalscroll.maximum doesn't seem to work. I think this is because x.panel's doesn't have any content that causes it to need scroll bars.
Is there any way to adjust audio volume directly using .net?
I can only find C++ coding which, sadly means nothing to me.
I would like to be able to record the current Audio Volume setting, change it (up or down), play a *.wav file, then return it to it's original level.
I am using a image-list to show images in a list-view. So far I am able to display all the images in the image-list but spacing between each image is very big. So I used the Send Message method which gave rise to another problem. Now when I click or move my mouse over(hot tracking enabled) any image the image becomes invisible. How can I solve this problem ?
[code]...
After Mouse-Move:Also I have this big left margin although listview margin is set to All = 3 The First column of Images is not being displayed !!!
How can I adjust the icon quality on a tool bar?
Below is the code I am using to add a tool bar and add the icon to the button. I am having a problem with the quality of the icon. The icon is 32X32 and has looks good viewing in windows explore. When it is viewed in the imagelist the quality is very poor. What can I do?
Code:
Dim tsView_ZoomIn As New ToolStripButton("")
AddHandler tsView_ZoomIn.Click, AddressOf ZoomIn_Click
tsView_ZoomIn.Image = ImageList1.Images(0)
[Code]....
Is there a way to adjust the opacity of a single PictureBox?
I want to be able to fade of any one or more of nine images on a form, maybe all but one say, to emphasis the one or more of those images that remain. I can't find any reference to an opacity value for PictureBoxes.