I would like to add an effect where a panel sweeps out of the way to make room for another panel. This is sort of like a sliding effect, and I think at one point in time this could be seen on Apple's website under their product pages. I came up with some code, but it isn't working.
[Code]...
how to animation effect in win forms my main form 4 buttons and 4 panels each button click i need to show appropriate Panel can show n hide the panel with some animation effect how to do this
View 6 RepliesI need to center the red panel in the middle of the dark grey panel, when you resize the form the red panel should be in the middle, and the red panel can't be resize, anyone have a code or property to do this?
View 2 RepliesWhen a user is editing a given piece of data, they're allowed to add messages/comments. These are stored as child records in a SQL database. Clicking on the Add Message button brings up a panel (pnlMessage) courtesy of the AJAX ModalPopup Extender. This takes some input and, when the "Send Message" button in the panel is clicked (I learned the hard way to NOT make that the 'OkButton' property), the message is stored in the database and an email is sent to the intended recipients. No problem there.
However, I need to be able to allow the user to add new email addresses (so long as they are registered in our database). I have another ModalPopup / panel combo (pnlSearch) that's tied to a button on the previous panel (pnlMessage).
The user is supposed to be able to add an email or click on a search button to populate a list to choose from.
The pop-up panel (pnlSearch) comes up just fine, but clicking the "Lookup" button (which instigates the search and returns a collection of records that the user is supposed to pick from) closes the panel.
Previously, I ran into the problem of having the Button.Click event never firing when I put the Button into the "OkControlID" property (the CancelControlID works fine since I don't want to do anything). Removing the "OkControlID=Button" line allowed it to work perfectly with the Button.Click event firing as expected.
So now I have the Search panel with a button for "OK" and a button for "Search" - but the panel should stay up and visible after the Search.Click does it's thing. Am I missing some property that basically says "don't close the panel when this button is clicked"? Of course, if I bring up the panel again in the same session, the results from the previous effort are there (the search results).
I have a TopBar, A LeftBar, A VScrollBar, A HScrollBar and a Panel inside a SplitContainer Panel.The issue I'm having is that when my SplitContainer Panel is small enough to enable one of the ScrollBars, I will slide the ScrollBar and then when I resize the Split Panel, my Panel1 is staying where I scrolled it too.I'm having troubles thinking of the correct code to fix this.
[Code]...
I was trying to move some dynamic control within the parent container like panel or a group box how do i do that?
View 12 RepliesI'm working on a visual studio 2008 VB.Net project (.net framework 2.0), and am having some trouble with the Panel control using a fixedsingle border. As a small example of the problem, suppose I have one Panel2 contained inside of Panel1. If the Left position of panel2 is set to 0 (meaning it's border is up against the left edge of Panel1), the left border will show as bold, and slightly indented.
<Global.Microsoft.VisualBasic.CompilerServices.DesignerGenerated()> _
Partial Class Form1
Inherits System.Windows.Forms.Form[code].....
What I'd like to see is just a single line, not bold or indented, where the two panels borders are equal.Is there a property or custom paint technique I could use to achieve this behavior?
I populate a listbox with locations search results, I then have 6 panels below the listbox each with a combobox containing all available locations. I want to allow the user to click on one search result in the listbox and drag to one of the 6 panels and set the combobox.selectedvalue = listbox.selectedvalue.
i have researched the drag and drop and have yet to figure out how to accomplish this. I think i could do it using some key down events etc. ?
This is for a mapping/plotting program.
t.panel is the main panel and it has too much content to fit in one screen so there are scroll bars. x.panel contains the horizontal scale for the data points in t.panel. I drew the scale using a bitmap and set it as x.panel's background.
Setting x.panel's horizontalscroll.value = t.panel's horizontalscroll.maximum doesn't seem to work. I think this is because x.panel's doesn't have any content that causes it to need scroll bars.
I have a problem with a certain panel in another panel.
I have declared a panel on my mainform that is called panel1 ( dock: fill)
In this panel is another panel ( panelmain )with size 10.000, 10.000 pixels. Now I put the auto scroll property of panel1 to true, so then the panel1 has scrollbars on both sides and can show the whole panelmain.
Now the user has the ability to zoom, which basically means that I just scale Panelmain with all it's child controls.
Like Panelmain.Scale(0.95) ( To zoom out )
And panelmain.scale( 1.05) ( To zoom in)
This works well, but when the user is using the scrollbars in panel1 and after that zooms in ( or out ) the location of panelmain is changing. So I tried to solve this by docking panelmain inside panel1 at the left. But now the vertical scrollbar is gone. how I should dock panalemain inside panel1 to prevent panelmain from moving around but also in a way that both the horizontal as the vertical scrollbar are present?
Im using this code
Private Sub Form1_MouseEnter(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.MouseEnter
For i As Integer = 38 To 2 Step -1
Panel1.Height = i
Next
[CODE]...
I have 2 panels on the form butttt for panel one i want to slide height and panel 2 i want it to slide width.
In VB6 I could embed a panel or picturebox containing controls or images within an outer panel or picturebox. If I moved the outer control then the embedded panel would move with the outer panel and stay in the same relative position, which is what I require. This doesn't seem to happen in VB.NET, the internal panel stays fixed in its location, even if I have pasted this panel within the outer container. Is there are trick to this or do I have to code to get the internal panel to move with the outer one? How does an internal container remain embedded within an outer one?
View 4 RepliesIs it possible to just entirely flip the contents of a panel upside down?
There isn't really a reason for this, I'm just curious and I've been messing around but I can't find anything? Has anyone managed it before?
This works if I don't have an IfElse statement but even then it only shows 1 txtBox().I want 4 panels and 4 rows of textboxes in each one. with multiple txtbox()'s in each oneI'm just starting on it, but as usual I hit an error, see below. Also, how do I get this code in here without the double spacing problem?
Dim pnlbox(4)
As Panel
Dim txtBox(70)
[code].....
My Project is Hair Sytle simulator all I need is to transparent the BG of the Panel
View 1 RepliesI want to Make A control Panel Extensions I'm using VS2005.net Windows Xp professional Edition
View 6 RepliesI am trying to make a panel move with the mouse.
Just like the iPhone where you press down and move your finger up or down and the items on the page move.
I am tring to do the same type of affect with the mouse and a panel.
When a user clicks the left mouse button and moves the mouse up or down moving the panel up or down. but I want to be able to click anywhere on the screen.
Is there a way to make a pop up (like a msg boxs) if the mouse goes over a panel?
View 1 RepliesWell im not understanding to much about the panel control. I am not understanding on how to do this panel control put a textbox and button control in it, when the user selects load from Internet, you make the panel control visible, then use the textbox to get the URL from the user and the button to fire the event that makes everything happen
View 1 RepliesI build a web project (ASP. NET) With VB Language In Visual Basic to be run properly But when I host transfer Error shows?
View 9 RepliesAlright im trying to make my application look very nice with a slide out panel. The panel has all the settings for the application.How do i make it so when the mouse is not on it, it will side back, But it will leave a tiny pixel of panel still showing. But when the mouse is over that how would i make it slide back out?
View 9 RepliesI am working on a small game, Moon Lander and I figured how to make rocket falling from the top of the panel which is on the form. I want to have fuel burning feature so I can land rocket properly on the bottom of the panel.[code]If anyone knows how to burn fuel (minus the gravity) so rocket starts to slow down, and eventually stop, then rise up,
View 2 RepliesNow my idea was to have a tablelayoutpanel with labels in it,Functionally my TabControl allows the user to sequentially select various components used for designing a machine, My idea was to provide him an overview of his previously selected components at every tab.
View 2 RepliesI did following on panel paint and it works great. I want to make a function in module and send panel to it and do the following color stuff on it. how i can do it?
Private Sub Panel1_Paint(ByVal sender As System.Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles Panel1.Paint
Dim brush As New System.Drawing.Drawing2D.LinearGradientBrush(e.ClipRectangle, Color.White, SystemColors.Control, Drawing2D.LinearGradientMode.Vertical) '(Me.ClientRectangle, Color.Blue, Color.White, Me.Horizontal)
[Code]...
I'm in the need to draw a border of different color and dimension around a panel, after a paint event.
View 7 RepliesI am currently making a VB.Net game for my end of the project, but I have found myself in a deadlock. I was wondering how to make labels move up and down in my panel by themselves at a set speed. Also left and right by themselves. I've tried a couple different methods but none seem to work. They either lag or I can't seem to set where there bounds are.
View 1 Repliesi have a Form with 2 panel. i want to link from one panel to another panel. eg. i click on chocolate cake in the first panel then it will display the steps of cooking method and ingredient in the second panel.
View 17 RepliesI wonder how you can make a picturebox selectable at runtime and also change the size and location during runtime?
Well I know how i can change the location of a picture box during runtime but that is only with a picturebox that is already defined in the form before runtime.
So I write an event for that particular Picturebox.
But now i want to do the same thing with a picturebox that a user can add during runtime and then the user should be able to select and move the picturebox.
So now i can't add code to the picturebox event so I wonder how you should do this. ( Maybe with reflection?)
And what if the user added 10 picture boxes and selects a certain picturebox. How do you make it possible that the picturebox the user clicks on is selected?
Should you store each picture box location on the Panel and then when the user clicks on a certain pixel in the panel where a certain picture box is it get's selected?
I have a BackgroundWorker and the DoWork event, calls a function called "JustMe", it executes a loop to make visible all the controls on a panel, but does not work vb.net
Private Function JustMe As Boolean For Each ctr As Control In Panel1.Controls ctr.Visible = True Next Return True End Function Private Sub BackgroundWorker1_DoWork(ByVal sender As System.Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles BackgroundWorker1.DoWork
JustMe()
End Sub
I want to make a panel or a picturebox which is vertically rotated by an angle in y-axis. The form's opacity should be 50% but panel opacity should be 100 that is panel should be clearly visible but form should should be 50% transparent.
View 4 Replies