Im using this code
Private Sub Form1_MouseEnter(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.MouseEnter
For i As Integer = 38 To 2 Step -1
Panel1.Height = i
Next
[CODE]...
I have 2 panels on the form butttt for panel one i want to slide height and panel 2 i want it to slide width.
I am looking to create a custom slide in menu that will host all of my modules for my application. The part I need guidance on is how to create the animation for the panel to slide in and out. I am looking to have a button on my application and when a user click on it I want it to expand down and right to show available modules. Is this done with the slider panel or a canvas, custom animation or something else?
View 2 RepliesJust a quick one really folks. Has anyone come across any VB.net control that acts similarly to a kind of slide out panel. I'm thinking a form in which there is a little tab at the side which can be grabbed and pulled out to reveal more controls. (Pulling the panel over the current form). I assume that this is something I will have the create myself but I was just wondering whether anyone has come across a control that already does this.
View 4 RepliesAlright im trying to make my application look very nice with a slide out panel. The panel has all the settings for the application.How do i make it so when the mouse is not on it, it will side back, But it will leave a tiny pixel of panel still showing. But when the mouse is over that how would i make it slide back out?
View 9 RepliesI like to use pop out panels that would just slide but sometimes it looks bad. is there a way i can fix it to make is as smooth as possible?
Here is the code i use:
dim pp as new point
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
pp = Panel1.Size
End Sub
[CODE]...
How to slide a form up while revealing another form. II basically want form1 to slide up when closed by the user and while the slide transition is taking place I want form2 to Gradually show. How to achieve the slide up transition in Visual Basic 2010?
View 4 RepliesI need to center the red panel in the middle of the dark grey panel, when you resize the form the red panel should be in the middle, and the red panel can't be resize, anyone have a code or property to do this?
View 2 Replieshow to show a panel on top of other panels ?
That means , when a panel(panel1) is in top of another panel(panel2) , when i click the background panel(panel2) will be shown in top of the panel that was in top(panel1)...
i have 2 panels , one next to other and one picture , when i have the mouse in front of the picture i hover another panel to show , it has a lil bigger width than the panel 1 and that doesnt allow it to show fully.
View 16 Repliesmaking a form slide in and out from the edge when the mouse is over the form 'tab'?would it be the mousehover event ?And I've tried using the animatewindow api but not getting too far !
View 5 RepliesI've been kinda stuck on a problem where I have to make Conway's game of life, simply stated I need to check all panels directly around* another panel is there a way to do this easily, other than using a billion if's in the program. Tab index? I could switch to button's if I wanted to but at that same time I find panels to be simpler for stuff like this unless anyone has a different opinion.
View 13 RepliesI want to be able to iterate through a set of panels and set their background color but ive used the [code]...
The error i get is "Panel is a type and cannot be used as an expression"
status control is another panel with houses the smaller panels, makes it easier to hide the lot when needed.
well, the title says iti got panels which keep other panels as memberseven if i drag the panels out of the panel..how can i make every panel "standalone"?
View 1 RepliesHow can I set a panel to a set height?
View 18 RepliesI have two panels, and I want them to both scroll horizontally with one scroll bar, but I only want one of them to scroll vertically. So if I have a large panel on autoscroll, it works fine for that panel, but I have another smaller panel above that, could I make the smaller panel scroll horizontally with the larger panel's horizontal scrollbar?
View 2 Repliesuse regular panels in a collapsible panel? Mine seem to be disappearing at runtime...
View 1 RepliesI am looking for away to include a power point slide show inside a form in vb.net 2005. Office 2007 will be installe on all of the client machines which run the program. I have found ways to launch and control a power point slide show in an exteral window, but no way to attcah it and place it on the form window.
View 1 RepliesPanel doesnt show real width
View 11 RepliesI have a panel that has 8 buttons located on it each named But1,But2,ect. What I am trying to figure out how to do is resize all of the buttons in width when the panel is resized in width. [Code] Is there something simpler to do this as I will eventually have 3 panels with 8 buttons on each one that would need to be resized at the same time. In VB this was controlled by an index and a for next loop, but I see no way to create a control array for all the buttons when they are on separate panels.
View 15 RepliesI was wondering if anybody could tell me how to make a slide show for a picture viewer. I already have a counter set up for it... all I really need help with is a timer to change the pictures. Here is the application's page and source code:
[Code]...
I'm currently working with PowerPoint in VB.NET and having a bit of trouble getting a slide to have an individual background. Using the SlideMaster method changes all slide in the presentation and I want only one to be affected
PS Using the Background.Fill.UserPicture method doesn't seem to be working, but I'm not sure why...
MS PowerPoint, on the left side, there is a slide bar showing slides/pages available, is it that a slides pane? And how can I do that, let say if I want to create a new page/slide, how can I create a new blank slide? Also the side bar will display the pages/slides but is in smaller view...
View 1 RepliesHow can I make a transition between forms so that it appears the second form slides in from the right? I know its possible to make a slide effect with a timer, but how do I do it to move a form?
View 18 RepliesI would like to add an effect where a panel sweeps out of the way to make room for another panel. This is sort of like a sliding effect, and I think at one point in time this could be seen on Apple's website under their product pages. I came up with some code, but it isn't working.
[Code]...
add notes in the powerpoint slides notes part under the powerpoint slide.using Microsoft.Office.Interop.PowerPoint. I'm using vb.net code.Now it si creating the ppt file and I can add text,comments,image. in the slide . But I need to add notes in the powerpoint slide , in the bottom part of the slide.
Here is the code i'm using for creating slides.
Dim oApp As Microsoft.Office.Interop.PowerPoint.Application
Dim oPres As Microsoft.Office.Interop.PowerPoint.Presentation
Dim oSlide As Microsoft.Office.Interop.PowerPoint.Slide
Dim bAssistantOn As Boolean
[code]....
I have a tab control on my MDI parent form that I want to have docked so just the tabs show from the bottom up on the screen. Then on mouse over it slides open to reveal another form/controls that are contained in the tabs.
Just to understand me a little better I am including some images.
The first is where I want the tabs to start. The second is where I want it to slide to on mouse over or click.
How can I get a control to slide into view onto my form? It could be a button, panel anything. I just want it to look like it slides in from one of the sides.
View 1 RepliesMake a slide show on visual Basic Please exact code
View 10 RepliesWhen a user is editing a given piece of data, they're allowed to add messages/comments. These are stored as child records in a SQL database. Clicking on the Add Message button brings up a panel (pnlMessage) courtesy of the AJAX ModalPopup Extender. This takes some input and, when the "Send Message" button in the panel is clicked (I learned the hard way to NOT make that the 'OkButton' property), the message is stored in the database and an email is sent to the intended recipients. No problem there.
However, I need to be able to allow the user to add new email addresses (so long as they are registered in our database). I have another ModalPopup / panel combo (pnlSearch) that's tied to a button on the previous panel (pnlMessage).
The user is supposed to be able to add an email or click on a search button to populate a list to choose from.
The pop-up panel (pnlSearch) comes up just fine, but clicking the "Lookup" button (which instigates the search and returns a collection of records that the user is supposed to pick from) closes the panel.
Previously, I ran into the problem of having the Button.Click event never firing when I put the Button into the "OkControlID" property (the CancelControlID works fine since I don't want to do anything). Removing the "OkControlID=Button" line allowed it to work perfectly with the Button.Click event firing as expected.
So now I have the Search panel with a button for "OK" and a button for "Search" - but the panel should stay up and visible after the Search.Click does it's thing. Am I missing some property that basically says "don't close the panel when this button is clicked"? Of course, if I bring up the panel again in the same session, the results from the previous effort are there (the search results).
I have a TopBar, A LeftBar, A VScrollBar, A HScrollBar and a Panel inside a SplitContainer Panel.The issue I'm having is that when my SplitContainer Panel is small enough to enable one of the ScrollBars, I will slide the ScrollBar and then when I resize the Split Panel, my Panel1 is staying where I scrolled it too.I'm having troubles thinking of the correct code to fix this.
[Code]...
