Is there any way to adjust audio volume directly using .net?
I can only find C++ coding which, sadly means nothing to me.
I would like to be able to record the current Audio Volume setting, change it (up or down), play a *.wav file, then return it to it's original level.
Is there any way to adjust master audio volume directly using .net?
I can find C++ coding which, sadly means nothing to me. There's also quite a lot out there for VB4, 5 and 6 but I can't get any of that to relate to .net. Most of those seem to want to invoke the 'Slider' via the mouse which is not what I'm after.
I would like to be able to: -
Record the current Audio Volume setting,
Change it (up or down),
Play a *.wav file, then
Return it to it's original level.
I've had some success with 'AxWindowsMediaPlayer' but only with it's own increase / decrease functions. I can only get it to increase the volume as far as the main system volume is set, so if that's at zero I get no output at all. As for part one of my requirement, record the current level, I've got nowhere with that at all. I tried putting the one file I want to use in resources but can't find how to access it, I have had to put the file in a folder and call it from there, it works but it seems a little crude.
Is there any way to adjust master audio volume directly using VB.NET ?
I can find C++ coding which, sadly means nothing to me. There's also quite a lot out there for VB4, 5 and 6 but I can't get any of that to relate to .net. Most of those seem to want to invoke the 'Slider' via the mouse which is not what I'm after.
I would like to be able to: -
Record the current Audio Volume setting, Change it (up or down), Play a *.wav file, then Return it to it's original level.
I've had some success with 'AxWindowsMediaPlayer' but only with it's own increase / decrease functions. I can only get it to increase the volume as far as the main system volume is set, so if that's at zero I get no output at all. As for part one of my requirement, record the current level, I've got nowhere with that at all. I tried putting the one file I want to use in resources but can't find how to access it, I have had to put the file in a folder and call it from there, it works but it seems a little crude.
How can i adjust the volume through vb.net codesomething really simple (if only in C#, that'll work too)
View 2 RepliesI've been digging around but I can't seem to find anyway to adjust the volume controls (the windows general ones) using VB .NET.Basically, I want to make a program that's always on top that allows me to changemute the microphone and the other volume values on a specific device - not necessarily the one set as default.
I got this weird feeling that I'm missing something quite simple but I simply could not find anything. I saw some media players and such but nothing similar to what I was looking for.
I'm trying to make a utility that will fade out the system volume (for when I fall asleep listening to my music). In XP and prior, controlling the system audio was very simple, however, in Vista and 7, I can't figure out how to do it. Because in Windows 7 each application has it's own volume control, lowering the volume doesn't affect the system overall - only the current app. Can anyone point me to a resource how to do this? Every forum posting that I've found on this topic is about XP, and doesn't work under newer versions of Windows.
View 2 RepliesI am trying to create a basic application that will allow me to open a .wav file and let me adjust the volume of the actual file: like raise the volume by 30% or 10% or some type of other measurement.
I'd like to then re-save the .wav file with the adjust volume.
I need to adjust the volume of this audio clip to make it blend with other system sounds (also played from My.Resources). I've tried looking this up in the help screens and found nothing. Is it possible to do?
.Computer.Audio.Play(My.Resources.POWER_TEST_COMPLETE, AudioPlayMode.Background)
I have been trying to find a code that would allow me to use a slider to adjust the users actual computer volume. Is this even possible?
View 1 RepliesI have Visual Basic 2005. I want to be able to adjust the Master Volume programmatically. In the recent versions of Visual Basic it is much easier but in VB2005 it is a little more involved from what I have read on previous posts. Is there a way to adjust the volume in the code of a Visual Basic 2005 program?
View 8 RepliesHow can a adjust the volume of sound and how to stop my embedded WMP in my application by coding?
View 1 RepliesSo I'm a bit new to the whole Vista/7 audio setup. My understanding is that a new "mixer" is created for each application. Is there some new .Net function which interfaces with these mixers? I'm actually trying to create an application which can adjust the MAIN system volume level as well as the mute function.
I was looking at the Endpointvolume API however I cant get it to work for me :(. Does anyone have a vb.net demo of how to harness this API?
It seems like this would be a very easy thing to accomplish, but, from what I can tell, it's most definitely not. My OS is Windows 7. All I need to do is get the current volume/audio level - the master volume. When you click the little speaker icon in the task bar and change the volume - I need that number. All I need to do is get the current volume and assign it to a label. So if the volume is at 74 when the application starts, I need my label to display 74. I've been searching for days now for a way to do this and I'm starting to get frustrated. I've looked everywhere. I've tried 3 different classes, at least a dozen different codes, assorted imported dll's- none of it even came close to what I need. From what I can tell, the current methods are all designed for windows xp. I need a way to do it in windows 7.
View 7 RepliesIt SOUNDS simple. In aVusual Basic application, how do I made an open (or controlled thread) connection to continuausly stream the microphone to the speakers?
View 1 RepliesI'm developing a standslone system for my school project. I'm developing an audio management system which allow user to add audio files itself into database together with the audio information such as artist name and album year. I just started it few days ago and face some problems.. my song in the playlist wont continue to play after 1 finished and i need some idea on how to store the audio files into database ... in blob types may be?
Heres the screenshot and codes
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles bt_add.Click
[CODE]............................
I just want to ask or I need some idea on how to convert wav files to mp3 and compressed the file to make the size smaller. I've search on the internet and find vorbis.dll as a reference object and lame.exe for converter. With regards to the audio compression, i downloaded monkey's audio software but doesnt have an idea on how to incorporate it.
View 2 RepliesIm trying to capture the audio played on my laptop. so i have searched the internet and found a source code for doing exactly that. the problem i have is that my audio device is not listed in the dropdown box (see picture) but it does when its run on windows xp (im running windows 7 x64) the goal of this application would be to capture my friends radio stream and save the individual played mp3's to a loction on my hard drive.(yes i have permission) i have included the source code so perhaps some 1 could have a look at it. (source code)[URL]
View 2 Repliesmake a VU meter for Audio to monitor audio input devices volume level such as microphone and etc?
View 7 RepliesI have a database application developed around Access with VBA,I have used the Speech SDK and developed an application that in conjunction with MSCOMM 6.0 library calls into a remote IVR system.It sends in the credentials and queries information in response to that IVR's verbal requests. All seems successfull except for one problem;I'm using a shared SR engine and its using the system microphone as its audio input, this in turn gets the sound from the speakers which are routed to the telephone line through the modem. Of course this has a number of disadvantages - noise added to the sound from the environment and sound quality degredation as well as speaker volume dependency.
I would like the SR engine to take its audio input from the modem in paralell with the sound that goes to the speakers (so we can listen in to the call as well). This means that I must route the system audio output to the SR engine audio input. It seems that I must use an InProc SR instance - however in VBA that type is not recognized - since the shared SR uses the microphone as input by default. there is some statement to the effect that it is difficult in Microsoft's Help file. I'm unable to set the SR audio input to the modem output stream in VBA.As needed I can accomplish the C++ interface using an ActiveX object or a DLL to expose the missing API to VBA?
how can i play the audio after the previous audio play is finish by using directx.
assume i have audio1.wav and audio2.wav.
i play audio1.wav by this code.
audio1 = audio.fromfile("D:audio1.wav", false)
how can i play audio2.wav after audio1.wav is finish? without use any button or signal. just depends on when the audio1.wav is finish, then audio2.wav will play automatically.
i learned how to adjust and use sql server 2005(create database , table , persmissions,) now i want to creata a windows application with Database(sql server2005) and VB.NET 2008.could you give a link , tutorial , ebook , article ,moive to give me good information how to use sql server in vb.NET?
View 3 RepliesI just moved to VB 2010 Express. PrintForm works, but the image prints with a large left margin and runs off the right edge of the page.[code]...
View 2 RepliesI have a MAC 24" wich I like because I have it working as a Microsoft XP.I make several programs in VB6 using most of the screen (about 80% width).But I have several others PCs from 20" to 11".I'm trying to find an automated system to adjust the form, listboxs, etc., to the smaller screens.
View 6 RepliesIs there any easy way to adjust a width of TextBox in this way:
- minimum width is 80,
- maximum width is depending on font size and number of characters?
The textbox is read only.
I wanted to insert a translation:
I have a UserControl in panel (load at runtime). When I change the size of the window, customize the size of the panel (using "Anchor"). How to adjust UserControl in the Panel?
UserControl.size unavailable from Form
UserControl.size can change only from UserControl?
I am using Visual studio 2008 and I need to be able to adjust a font size using an expression.So far I have,
IIf((Len(First(Fields!CardID.Value, "data"))> 30), "12 pt", "72 pt")
I know I have to reference the LEN variable to get the total character size, but I'm not sure how.
Is it possible to adjust monitor screen brightness [usually do via [fn]+F7/F8] via VB.NET?
View 9 RepliesSo i have a tab control that shows the entire url of a website - and so to control it i set the tabs to be fixed however all i see is http:// and then the first 2 letters of any site, this really doesnt help if you want to see what site your on..so is there a way to adjust the size of the tabs or is there a way to get rid of the url...
View 1 RepliesI am using a image-list to show images in a list-view. So far I am able to display all the images in the image-list but spacing between each image is very big. So I used the Send Message method which gave rise to another problem. Now when I click or move my mouse over(hot tracking enabled) any image the image becomes invisible. How can I solve this problem ?
[code]...
After Mouse-Move:Also I have this big left margin although listview margin is set to All = 3 The First column of Images is not being displayed !!!
How can I adjust the icon quality on a tool bar?
Below is the code I am using to add a tool bar and add the icon to the button. I am having a problem with the quality of the icon. The icon is 32X32 and has looks good viewing in windows explore. When it is viewed in the imagelist the quality is very poor. What can I do?
Code:
Dim tsView_ZoomIn As New ToolStripButton("")
AddHandler tsView_ZoomIn.Click, AddressOf ZoomIn_Click
tsView_ZoomIn.Image = ImageList1.Images(0)
[Code]....
