Get Sub To Address Appropriate Control / Can Set Its 'checked' Property Based On Text Read
Jan 2, 2012
I have a form with about 48 checkboxes.I have a public sub that reads a webpage, parse the text of that site to get the values that correspond to these checkboxes.For example: one of the lines would be: "Exterior = 255", or "Street = 0".I do have check boxes that called "Exterior" and "Street". the question is how I can get my sub to address the appropriate control so I can set its "checked" property based on the text read.
View 3 Replies
ADVERTISEMENT
Oct 12, 2009
I am trying to make a control, like a toggle control like a on/off button and I need to insert/create a property, a checked property.
View 1 Replies
Jun 22, 2009
I need to make a program for my school (I`m the principal), that reads the text in the memory address of the program and write it down in a txt. I already have the address numbers. For more information, I use VS 2008.
I was trying to make one code to get the memory address. So, after I succeed this, I'll make the correct program.
The code I made(adapted from [URL] returning-0 ):
Public Class Form1
Private Declare Function ReadProcessMemory Lib "kernel32" (ByVal hProcess As Integer, ByVal lpBaseAddress As Integer, ByRef lpBuffer As Single, ByVal nSize As Integer, ByRef lpNumberOfBytesWritten As Integer) As Integer
[Code].....
View 1 Replies
Jun 1, 2012
I have a very simple class that holds a few public properties - ID, Text, Colour, etc. and a Boolean called 'SelectedItem'. Just like the Checked property on RadioButtons, only one item can have its SelectedItem property set to True within a particular group. Note: there will be several separate groups (lists), each allowed to have only one item with SelectedItem = True.
My first thought was that I would probably just have to handle everything outside of the class, setting SelectedItem to False for every other item in a particular list when another item was selected. But that seems rather inelegant to me. So I've been trying to think of how this might be done within the class. For example: could I perhaps have a private string property called say "GroupName" - set in the New sub when adding a new instance of the class - and then use a private shared method to set every item's SelectedItem property to False, provided the item has the same GroupName as the newly selected item? I would have a go at doing this but I have no idea how to enumerate every instance of a class from within that class, or whether that's even possible. Is it? Or is there another (better) way to achieve my goal? Here is a cut-down version of what I've got so far:
Public Class ResourceItem
Public ID As Integer
Public Text As String[code]....
As can be seen: instead of instantiating a new ResourceItem and passing that as an argument to the manager's Add procedure, I'm simply passing the details of the new item and the procedure is creating the item from those. I don't know whether this is a good or bad idea - please advise - but I've done it because I couldn't figure out how to make the SelectedItem property only writeable by the manager, so I wanted to avoid having directly accessible objects that could have their SelectedItem property set to True without it deselecting all the other items in the same group. Of course that still leaves the possibility of setting a variable to one of the manager's list items and setting it from there, so I would still like to know how I could prevent that, if possible.
UPDATE: I didn't use the code above in the end, deciding instead to go with Cyborgx37's solution - which seems to work perfectly well for me despite the warnings about best practice. I also realised I would need to use the same class in another scenario where multiple items could be selected, so it was easy to add a Boolean property to the manager to enable that.
View 2 Replies
Jul 27, 2009
I have used thirrd party tool from BigSpeed for file transfer. When ever I am trying to assign a value from (txtUserName) to the property like
FileTrans.GetUserName=txtUserName.text.trim
It gives error as Readonly property..... That means I can not assign a value to it.
View 6 Replies
Jan 14, 2011
On a given application form, I have around 20 controls that I need to set in the main form. I have a separate thread that only needs to ready some properties from the controls on the application form It will never try to write to the form's controls.
[Code]...
View 9 Replies
Apr 1, 2010
Can any one tell me how to read or write the control property values that has been saved as ocx state value in the XML? I have some controls. I am assigning a property values for that controls and it is saving as binary64 format. I need to automatically assign property values in the binary64 format in xml.
View 1 Replies
May 1, 2009
Is it possible to read a label's text property of another app? I know how to get the handle of the main window, and how to get the handle for a child. But the problem is that there's like 20 other labels on the window and when I use winID to get it's class, it's just "Edit", and it's the same for all the labels. And the title is the value of the labels text property. [URL]
View 3 Replies
Jun 6, 2012
Is there a way to bind the text property of a control to an expression? I have a user control that I add to a FlowLayoutPanel. You can see I have 4 controls in the FlowLayoutPanel below. The first control is a LinkLabel and the other three are my user controls which are numbered 1, 2, & 3. I'd like to bind the label that shows the 1, 2, or 3 to the user controls index within the FlowLayoutPanel.
If I happen to remove the 2nd user control I want the 3rd user control to now display 2. I could use the FlowLayoutPanel ControlAdded or ControlRemoved events, but wanted to see if I could do some binding first.
View 5 Replies
Apr 23, 2012
I am using two user controls in my web application. I want to read a Label text from a user control via another user control. How can i read it?
View 3 Replies
Oct 27, 2009
Is it possible to put RTF text in a control's tag property?
View 5 Replies
Jan 11, 2010
I am using custom textboxes and I need to be able to set the Text on txb1 based on the Text of txb2. I have simplied my code to the following:
Public Class customtextbox
Inherits TextBox
Public Event ControlReset()
[Code]....
So, when txb1 looses focus, if its Text is "fried", then it sets off txb2's ProcessAlert function. I had tried to change the value of txb2 Text in ProcessAlert function, but didnt work, so I tried to get it to raise an event instead, which then tries to set the Text property. However I still cant set txb2's Text property. The Text property seems to be set for the duration of the "life" of the Event handler. When I step through the forms controls within the Event handler, the changed Text value is there, but not outside of the Event handler.
View 2 Replies
Nov 15, 2011
I have a list view with Two Columns. I want to set text in the Column Header as "Bold" & Text Align as "Center". But the text in the rows of the list view not required bold & center.
So, How to control them independently...?
Question II:
How to modify the Height of the rows...?
View 1 Replies
May 12, 2012
how I can control the tool tip popup or make calls to the text that displays based on a integer value. I'm wanting it to display a text based on a interger value inside an if statment for a picture box. So if the ingteger = 1 then tooltip.text = "" else tooltip.text = "" but that is not the correct syntax.
View 2 Replies
May 25, 2011
I am making a custom button control and am having some difficulty with my Text property. Anything I type in only stays while the form designer window is open. When I close the form designer and reopen it, my Text property resets to "". Also if I run the program, it loses the value entered at design time.
I also have an Image property for my control which is working just fine.
Here's some of my code:
Imports System.Drawing
Imports System.Drawing.Imaging
Imports System.Windows.Forms
[Code]....
View 2 Replies
Mar 28, 2012
I have a form which allows the user to create a question to find items.One of the questions is in the format of Something > a numeric value..So I used the NumericUpDown control. I set the NumericUpdown control to a valid range of values like 1 to 100.The user can clear the numericupdown control in which case the "Value" property returns the previous value prior to the user setting it to a Null String.
View 3 Replies
Oct 24, 2011
I have a form that successfully captures data, but I want to limit the the amount of entries by a user based on their email address. I am using SQL Server and VB.NET and would like to be able to check against the database, and if your email addess is in the system, popp up a message that says, "Sorry, you have already entered the system with that email address".
View 2 Replies
May 14, 2010
I am trying to look through a database and checked items in a checkedlistbox based on a Contact ID number. The error I'm receiving is this : Public member 'item' on type 'String' not found.
The error is on this line of
"If lstDebtState.Items.Item(x).item(0) = dt2.Rows(j).Item(0) Then"
<b>
Here is my
</b>
Try
con.Open()
[code]....
View 7 Replies
Feb 22, 2011
Is there a way to read an image pixle by pixle and create a text file based in the information.Lets assume we are reading each pixle from left to right. Once you reach the last pixle of the line you move to the line below that one and continue reading.Here is a very simple "if" statement to help visualize the process:
[code]...
View 1 Replies
Mar 23, 2010
I did some googling and found this forum post, and here is what I needed to do:
Imports System.ComponentModel
<EditorBrowsable(EditorBrowsableState.Always), Browsable(True), Bindable(True), _
DesignerSerializationVisibility(DesignerSerializationVisibility.Visible)> _
[code].....
View 6 Replies
May 10, 2010
When I put a label on a form, the Text property in the designer can be expanded to a multi-line edit box. (This is in VS2005.)
Is there a way to get that type of edit box on a custom String property of a usercontrol?
View 4 Replies
Feb 24, 2012
I created a simple user control with a label, and one property that allows me to set its text.I can call the property Text2 and everything works well, but if I call it Text it doesn't work.
I tried both this:
<Browsable(True)>
Public Overrides Property Text As String
[code].....
View 7 Replies
Sep 19, 2010
I'm looking for a library for Autocomplete support in text controls which remembers all previous entries of the user and provide auto-complete support for it.For example for "recent files" I use [URL] and it works great. Do you know something like that for this purpose?
UPDATE : This is a .NET Winforms application and I'm using normal Text Control.
View 6 Replies
Apr 12, 2011
Does anyone know of a control such as a Checked List Box where each item can have a value against it.For example you have a list of fruits and in the listbox it displays Apple, Orange & Banana but the values for those items are A, O & B.
View 3 Replies
Sep 21, 2011
Is there a property of a grid view control that can set the text size of a column header?
View 2 Replies
May 20, 2010
I have a usercontrol which overrides the property Text. But this property is not shown at design time.If I rename it to caption or value it is shown in properties at design time but Text is not shown.
public Class SomeControl
Inherits System.Windows.Forms.UserControl
Public Overrides Property Text() As String
[code].....
View 2 Replies
Mar 23, 2011
Conceptually it seems like a derived class should be able to override a readonly property with a read write property. Why isn't this possible?
[code]...
View 4 Replies
Jan 18, 2010
What are the pros and cons of using the checkboxes checked property vs the CheckState property for databinding?
View 1 Replies
Jun 1, 2009
I have a WinForms dialog box that contains 3 radio buttons. I am using ApplicationSettings to bind the Checked property of each of these RadioButton controls, but it doesn't do what I am expecting it to do. Now I have to click each radio button twice before it gets checked and the selected radio button is not being persisted.Is there a line of code I need to execute when the form is closed that saves the user settings?How do I eliminate the need for 2x clicking on the radio buttons?Is there a better way to persist this type of user setting? I do have a public property on the dialog box class that gets/sets an enum value based on which radio button is checked, but I didn't see an easy way of binding that property to a user setting. Should have specified that I'm using vb.net. I think that means My.Settings instead of Properties.Settings.
View 4 Replies
Jun 18, 2008
I would like to read text from another programs listview control. I have searched over 3x forums for this and cant find any working examples and especially no working VB.NET examples.I know that i have to use the command 'LVM_GETITEMTEXT' with the API Sendmessage but i have no idea how to issue the command and need a working example to go from.
View 13 Replies