I have used thirrd party tool from BigSpeed for file transfer. When ever I am trying to assign a value from (txtUserName) to the property like
FileTrans.GetUserName=txtUserName.text.trim
It gives error as Readonly property..... That means I can not assign a value to it.
I have a usercontrol with a picturebox and a few buttons related to it, such as LoadFromFile, Paste and Zoom (that last one pops up a new form). Is there a way to override the basic Enabled property of the usercontrol so that I can keep the Zoom button active all the time, while turning off the other buttons?
I realize there are 2 "obvious" replies. don't do Enabled=False, create a custom method. do everything in the one form, not a usercontrol, so you can pick and choose disabling. Both are less than ideal, given that I'm putting this control into a couple of existing forms, so I'd like to work around how those forms already behave. So is there a way to override the behavior of my usercontrol when it gets disabled? What would be my best strategy?
How To Override The OpenFileDialog control to act as read only
View 5 RepliesI want to modify this code or replace it. I want to override the the textbox's textchanged event in a user control.
Protected Overrides Sub OnTextChanged(ByVal e As System.Windows.Forms.ItemChangedEventArgs)
MyBase.OnTextChanged(e)
End Sub
[code]......
If I need access to the value of a user control's property BEFORE PreRender, would I need to base the custom control off of one of the preexisting data controls (repeater, listview,etc.)?One of my user controls features a gridview control that is configured based on the user control's properties on which it resides. Several of the key properties alter the SQL Statement for the underlying recordsource. I'm now in a situation where the property that sets the WHERE statement for the SQL Statement needs to tied to a value in the user control's parent FormView. Think of the formview as displaying a customer detail record. The user control takes the customer's account number and then displays data from a related table such as Customer Contact Names. Since the gridview is created before the control's prerender event, working within the prerender event doesn't seem efficient.
View 1 RepliesHow to override the SelectedItem property? When you look at the description of the SelectedItem property, the description shows as:"Gets the selected item with the lowest index in the list control". I would like to bypass the "lowest index" portion of the property...I have multiple items in the same list with the same value, but different text. I just want to set the SelectedItem to the actual item I've selected, not one with the same value that appears earlier in the list...
View 16 RepliesI have created a form dynamically. On this from I have added two user controls. The first user control(Mylabel) is inherated from label and the second one(Mybotton) from button. On my Label control I have added a method as follows:
Public ReadOnly Property ctlStatus()
Get
Return (m_Selected)
End Get
[code]....
I am using two user controls in my web application. I want to read a Label text from a user control via another user control. How can i read it?
View 3 RepliesOn a given application form, I have around 20 controls that I need to set in the main form. I have a separate thread that only needs to ready some properties from the controls on the application form It will never try to write to the form's controls.
[Code]...
In my project, I have a table that has an image column, but with vs2008 it stores the image as bytes. I have the column set to allow nulls. When I save my image I convert it to a byte array. Then when I retrieve that row, I convert the byte array back to the image, no problems. The problem is when there is not an image selected I return Nothing to the datatable, saves ok, but when I try to retrieve that row, The dataset.desinger throw the "value in column dbnull". I can temporary override this error with a code change in the dataset.designer, but it does not stay permanently. How can I override the dataset.desinger property permanently.
Original dataset.desinger code:
<Global.System.Diagnostics.DebuggerNonUserCodeAttribute()> _
Public Property Image() As Byte()
Get
Try
Return CType(Me(Me.tableCustomers.ImageColumn),Byte())
[Code] .....
All I did is add the if statement capturing the dbnull and forcing it to return Nothing instead. When I close VisualStudio, then reopen this change is gone. How can I keep this or override it.
I created one web user control with property named "ReadonlyField" with boolean datatype. I am able to use in my web pages and now i wanted to add a description to that property so that i dont need to explain each time to my team member what is that property's intention.
I got following snippet in c# but didnt find any equivalent in vb.net and also not sure whether it will work or not.
[Description("My Description")]
public int MyIntProperty
{
get {..}
[Code].....
I built a VB ASP.NET 1.1 Web User Control that contains several properties. I want these properties to display in the VS2003 IDE Properties window, for easy manipulation. However, none of the properties appear! How do I make them show in the IDE?I am a C# guy, and not very familiar with VB, so this is probably a no-brainer. Here's a property, including attributes:
Private _priceHigh As String = "2000"
<Browsable(True), Category("SearchProperties"), Description("Foo"), DefaultValue("2000")> _
Public Property PriceHigh() As String
[code].....
I'd want a text box that at design time the developer can set a datatype property so only a value matching that datatype can be entered at runtime (e.g. If we made the datatype property of a textbox an integer then the user could only enter numbers into that textbox)In additiion I need a further property to replace ".Text". .Text always holds the entered value as a string, I want the new property to contain what has been written into the textbox but as the datatype that has been selected at design time.
View 1 RepliesNothing binds to my user control. It will bind to other controls. code for UC property:
#Region "IsOn"
'Public Sub IsOnValue_Changed Handles
Public Sub Me_IsOnChanged() Handles Me.IsOnChanged
[Code].....
I have created a control inherited from a label.I want to add some items to the control at design-time and use a property TypeEditor to set those properties. I have no problems creating my properties for values for the custom control itself, but how do I best get access to the items (in this case more controls) that I want to add to the control?Explained another way; take the ribbon control toolbar in Office 2007. It appears to be a "label" that hosts buttons as members of its controls collection.
View 11 RepliesI develped custom DateTimepicker in vb.net that users can pick date in persian lanquege with it.in my main contrl class i have bindable property with name "Value". here is the property code :
<Editor(GetType(TypeEditor), GetType(UITypeEditor)), Browsable(True), _
Bindable(True)> _
Public Property Value As String
[code].....
I have a form with about 48 checkboxes.I have a public sub that reads a webpage, parse the text of that site to get the values that correspond to these checkboxes.For example: one of the lines would be: "Exterior = 255", or "Street = 0".I do have check boxes that called "Exterior" and "Street". the question is how I can get my sub to address the appropriate control so I can set its "checked" property based on the text read.
View 3 RepliesCan any one tell me how to read or write the control property values that has been saved as ocx state value in the XML? I have some controls. I am assigning a property values for that controls and it is saving as binary64 format. I need to automatically assign property values in the binary64 format in xml.
View 1 RepliesIt is possible to override textbox properties like selectionstart property
View 3 RepliesI just start working with VB. In a programme I need to keep the value in text property after programme closed.That is why I want to change (override) Text property in TextBox.Then this value will be default value when I open the programme again.I will assing a value to textbox1 in a Sub.
Sub button1_click
Textbox1.text="ttt"
End Sub
Then I need to change the Text value under "Properties" window.TextBox1 System.Windows.Forms.TextBox
I think there is Get-Set method for property override but I dont know how to use.How can I do that?
I created one web user control with property named "ReadonlyField" with boolean datatype. I am able to use in my web pages and now i wanted to add a description to that property so that i dont need to explain each time to my team member what is that property's intention.[code]...
View 3 RepliesI have a host page with multiple user controls in it. Some of these controls have a user created property named Enabled, and is boolean.In some controls the default value for Enabled is set to False. In the host page, I am able to access the property and set it to True. The control does what it is supposed to.On this host page there is a "Run Report" button which executes a Server.Transfer to a "Results" page.In the codebehind of the results page, control values from the PreviousPage are checked via other user created Properties for the controls and added to a ParamterList.
I am attempting to check the Enabled property of the controls on the PreviousPage, however when this is done, it appears that the Enabled property is set to that of the default (in this case False), and not what I had set it to on the page when it loaded.Does the value of this property need to be put into a hidden text box or something so its value is available after the ServerTransfer? It seems like any control which contains a value is retrievable via the PreviousPage and its user created property, but any variable set inside of the control is reset back to its default value.
I am using VB 2008 Express edition.I have created a user control that has an enumerated property like:Public
[Code]...
There are 3 alternatives for this property: Member0, Member1 and Member2.Is it possible to change the alternative values of this property in runtime dynamically?
I am using a user control using vb.net. It include the program to retrieve the values from database while giving the paramers. When I set the property from my main program i am getting an error "Invalid attempt to call Read when reader is closed." When i gone to the online help i got the message as follows "System.InvalidOperationException (.NET Framework 4)The exception that is thrown when a method call is invalid for the object's current state. InvalidOperationException is used in cases when the failure to invoke a method is caused by reasons other than invalid arguments. For example, InvalidOperationException is thrown by IEnumerator.MoveNext if objects of a collection are modified after the enumerator is created, or ResourceSet.GetString if the resource set is closed before the method call is made. If the method invocation failure is due to invalid arguments, then ArgumentException or one of its derived classes, ArgumentNullException or ArgumentOutOfRangeException, should be thrown instead.[code]
View 1 RepliesI am trying to make a control, like a toggle control like a on/off button and I need to insert/create a property, a checked property.
View 1 RepliesI am creating a customised version of the ListView control and there are several of the properties that a ListView has that I would like to be set to a different value to the ListView default when a user goes to use my user control.
From what I've found there seems to be a number of people suggesting just set them in the constructor, but to the best of my knowledge that would just mean that the user would not be able to change the properties in the PropertyGrid in the VS IDE.I assume this is probably something extremely simple that I have overlooked.
I want to add a List(Of Book) property to my user control. I defined a Book class and BookCollectionEditor class for CollectionEditor. And also I defined a public property named BookList for my user control. For a custom control it works fine but for user control, the designer does not display my property. On markup I can add a Book item but on designer it gives error: "Type 'System.Web.UI.UserControl' does not have a public property named 'BookList'."Isn't is possible to define a list property for a user control?
<TypeConverter(GetType(ExpandableObjectConverter)), Serializable()> _
Public Class Book
Private _name As String
Private _author As String
[Code]...
Trying to access a property from the parent page on my user control.
Here's the start of my default.asp codebehind:
Partial Class _Default
Inherits System.Web.UI.Page
Private _selectedID As String = "74251BK3232"
[Code].....
I'm getting the error "selectedID is not a member of System.Web.UI.Page"
I'm trying to create a button that will hide the panel that I have docked at the centre of my user control. [code]This works to an extent. However, when the bottomPanel is set to Fill it seems to fill the entire control, and not just up to toolStrip1. Can anyone tell me why this is happening, and how to correct it?
View 1 RepliesI have a custom control and would like the properties to be mandatory (not default) when a programmer codes the control. Is there a good way to do this without throwing exceptions in the program?
View 2 Replies