Can any one tell me how to read or write the control property values that has been saved as ocx state value in the XML? I have some controls. I am assigning a property values for that controls and it is saving as binary64 format. I need to automatically assign property values in the binary64 format in xml.
View 1 RepliesConceptually it seems like a derived class should be able to override a readonly property with a read write property. Why isn't this possible?
[code]...
I'm new to VB.net and have only a few projects under my belt. This one has me stumped!! I need to open a file and search its contents hex byte by byte. (Similar to Hex editor). On finding a particular value I need to replace it with a set hex value then write and close the file. So far I have only managed to read / write the ascii equivilant.
View 4 RepliesWhat I want is to have the ability for the user once the values are entered into the Textboxes, the user has the ability to save the values for retrival a some later time. This is what I have so far
[Code]...
i looking for a way to read and write values in registry pocket pc using vb.net so far i have this:
[Code]...
Ive basically got 2 problems I need to solve.1) I am trying to determine if a certain process is running on the user's machine at the same time as my program.2) I am also then,if the process is running, trying to edit a specific memory addresses value. I have already found the memory addresses for the program, but how do I tell VB.Net to basically read the current value stored in that memory address, and then write a new value to that address
View 1 RepliesI'm writing a custom user control for my asp.net site, for storing datetimes. It has two properties:
Private _includeTime As Boolean
Private _value As DateTime = Nothing
Public Property IncludeTime() As Boolean
[code]....
I call my custom control in this way:
<my:DateTimeInput runat="server" includetime="true" ID="txtWhen" />
This sets the includetime property correctly.In my backend code I also do this on page_load:
txtWhen.SelectedDateTime = now
When I step through with the debugger, I see that the property gets set, BUT when the page_load of the control itself loads, the property value is reset to nothing!
The page_load of the control:
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
lbltime.Visible = IncludeTime
If SelectedDateTime().CompareTo(Nothing) > 0 Then
[code]....
I have used thirrd party tool from BigSpeed for file transfer. When ever I am trying to assign a value from (txtUserName) to the property like
FileTrans.GetUserName=txtUserName.text.trim
It gives error as Readonly property..... That means I can not assign a value to it.
I have a custom control. I need to add a property, say, Comparison, to the control. The property should be set at design time using a dropdown. The Dropdown will have String values like '=','>','<' etc.
I tried using Enum values and working perfectly but I need to do some extra coding to convert the Enum values to the string I required. It would be great if I can get the values from the dropdown so that I can directly use the selcted value.
I thought I saw how to do this but can't seem to find it now.Is there a way to set the properties of all controls on a Form by Control Type?Meaning, if I have 5 textboxes on a form can I write code like .If page.contol is TextBox then
textbox.forecolor = Blue
Then when the page loads is sets all the textboxes forecolor on the form to Blue.
On a given application form, I have around 20 controls that I need to set in the main form. I have a separate thread that only needs to ready some properties from the controls on the application form It will never try to write to the form's controls.
[Code]...
I'm having difficulty figuring out how to run different programs with my VB program. Using Excel and other MS office programs is easy enough since I just add in the relevant COMs, but I can't for the life of me find out how to run other programs. I promise I spent many hours searching before bothering you kind folks here! I'd think this is a common issue so maybe I haven't been searching for the right thing.how to write code that will control and read data from applications.I know you can do "Process.Start" to open any application, and it looks like there are ways to determine the controls available on an open application, but I can't figure out how to do it. Is this possible? Or do I have to import a .dll file for every program I want to control? Or are both possible?
View 12 RepliesI have a form with about 48 checkboxes.I have a public sub that reads a webpage, parse the text of that site to get the values that correspond to these checkboxes.For example: one of the lines would be: "Exterior = 255", or "Street = 0".I do have check boxes that called "Exterior" and "Street". the question is how I can get my sub to address the appropriate control so I can set its "checked" property based on the text read.
View 3 RepliesWhat is the best way to make a class property "Write Once, Read Many" such that you can only set the property once?
I know that I could pass all the properties in the constructor and make them ReadOnly, but in cases with a lot of properties I don't want a constructor that has 20+ arguments.
Also, I realize I can "roll my own" setters, but having to do that for every property seems like a bunch of redundant coding.
Is there a clean way to do this in VB 2008 .NET 3.5?
I've created a custom user control that has several properties. One specifies which database I want the control to access. I want to be able to present the user of the control a drop down from which he can select which database the control will interact with. How do I get the dropdown to work? I can get default values, but have yet to figure out how to get the selectable list.
View 4 RepliesI added 7 bmp files in the Resources tab of the Project Properties I have 7 PictureBox controls, for each control I set the Image property to a certain bmp saved in the Resource section.Everything was fine, however all of a sudden I got this warning message for each PictureBox
"The type 'My.Resources.Resources' has no property named 'lla_nodev'."lla_nodev represents the "lla_nodev.bmp" file I added in the Resource The worst thing is that the Form is unabel to load in the designer view, so cannot I modify it. The application is able to run though,with apparantely no problems in run time.
I'm trying to make a form that when it is return to, it will have the same state for the controlsI have 3 .net pages, testa,testb,testctesta, sets up the session and has a button to go to testb. testb has a check box and a button to go to testc. testc has a button to return to page testb.I want it so when we leave testc, and then come back the check mark will be in the same state, but it is not. it stays as uncheck when I go from page testc back to page testbThis is what i did,On the page load event, I set the check box equal to the "button" Session variable. On the button event I save the button checked state in the Session variable and call page testc
Protected Sub Button1_Click(sender As Object, e As System.EventArgs) Handles Button1.Click
Server.Transfer("testb.aspx")
End Sub
[code].....
to be able to print a list of objects in a user-defined way, i've implemented an IComparer (sortclass), which is able to sort any object by its property. I have a list that can be printed (first a pdf is generated trough the object, then passed to the printer), all done by clicking 1 button (print button).
The internal ICollection (list of) is perfectly sorted, however, the routine to create and print the objects is apparently called to soon... since not all objects are completely sorted when send to the printqueueu. A check of the list after all objects has been send to the printer proves however that the list is printed.
[Code]...
I have now had two occurances of (different) users "losing" their frm position. I save the position to my.settings in the formClosing event ... and this is the only place that these values are set. When the users loaded the form the first time it worked just fine. At some later point the for got repositioned to -32000 (top) and -32000 (left). I now check for this and reposition the form when it is not on the monitor, but I'd like to understand what causes this. I'm using VS2010 and compiling against .net 3.5
Is the formClosing the wrong place to put the logic to save the settings?
I want to use property bindings under application settings to store settings for my program. However I have run into a problem. For some reason the checked property is not binding to drop down menu item's checked state. The binding works for text boxes and other controls. I have tried to bind both using the checked property, and checked state property. Auto check on click for the menu items are set to true.
Anyone have any recommendations in getting the app-settings property binding to work without the need to manually set that info and manually run My.Settings.Save?
I have managed to get it to write a string to a textfile if the listviews checkbox is checked but i can not get it to write a particular string if it is unchecked.
'LOOP CHECKED ITEMS
For Each lstItem As ListViewItem In Me.ListView1.CheckedItems
Next
How do i Iterate an unchecked item as the library doesn't have .UnCheckItems?
If its checked i need to add "true" to the string and if its unchecked i need to add "false" to a string that gets written to a textfile.
I configured session state in web.config.<sessionState cookieless="AutoDetect" timeout="5" sqlConnectionString="....."/>Now, I want to know timeout and sqlConnectionString from code-behind.
View 1 RepliesSo I managed to sync up the filesavedialog to save the contents of my textboxes to a file in a location, but how do i use the fileopendialog to read the contents from that saved file back into my textboxes?
Private Sub SaveFileDialog1_FileOk(ByVal sender As System.Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles SaveFileDialog1.FileOk
Dim FileToSaveAs As String = SaveFileDialog1.FileName
[Code]....
that's my save dialog. i want to bring up the saved text from textbox1 back into the textbox on my application using the fileopendialog.
The code below does not alter the value of the TextOut Property in the sc object (an instance of SomeClass).But none-the-less the Set routine for TextOut is invoked.There's no other way that the TextChanged flag could become True.But that's what happens when I run the code under VB2010 Express (the only place I have tried it).
Does anyone think that this is not a bug in the compiler?
I know that the problem is related to, maybe caused by, the fact that the first argument to LookAtTextOut ("whatever") is passed ByRef.But I do not see how passing an argument ByRef should result in calling a Property's Set routine when there is no code in the subroutine which changes the argument.[code]....
i got an error while loading a page in asp.net.I have renamed the page before loading it.The error is as follows:-
**could not read state "objDebugResolveAssemblyReference.cache"**
I have a DEM file(Digital Elevattion Model File) and I am trying to open the file,where we have Latitude and Longitude values inside the DEM file.And, Now I have opened the file using Filestream and Read the file using BinaryReader.But, I am having a trobule in getting the values of Latitude and Longitude.I am getting Byte values randomly as 1,202,31,271 etc.But, we dont have latitude and longitude values more than 180,and also I am not getting 16 bit UInt values.For example, the values should be like Latitude 20.00416666666667 and Longitude 39.99583333333333.So,read the correct Byte values of the DEM file.The code I have used till now is:
Dim fs As FileStream = New FileStream("C:UsersadminDesktopHeader and DEM fileE020N40.DEM", FileMode.Open, FileAccess.Read)
Dim rd As New BinaryReader(fs)
Dim convertDB As UInt16
For i = 0 To rd.BaseStream.Length
[code]....
I'm trying to make a form that will read my wordlist. txt (one word or phrase per line) then using a timer, insert one word randomly selected from the list, and display it in textbox1 where it will remain until another timer changes the word. The word in the textbox will display for a random time 1min to 7 min, then the textbox displays another word randomly selected from the word list.
View 1 RepliesDoes the webbrowser control use cookies saved in the IE cookies folder?
View 2 RepliesI need help making this code work better. Currently, what happens is when it reloads, I loose the third value which is a calculated value . I would like for my page to reload without loosing the values for each property and each instance of the user control on the page.
[Code]...
Ok everyone knows that you can get the visibility of a control by control.visible...now my question is this: how can i get the visibility of a control without taking parent controls into account ...ie. if i have a button in a picture box ... and the picture box is invisible (even though the button property is visible in the designer) the value returns false.How can i return the visible value for the control that is displayed as it would be in the designer?
View 1 Replies