When I have a listbox full of items and scrolled such that topindex is not zero/first item, changing the value of the top item causes the list to scroll up by one.I can compensate for that easily by changing topindex after the listbox1.items(index)=value statement, but does anyone know why it happens or if there is some property I'm overlooking?
View 2 RepliesI'm using a textbox to supply a filter for the datasouce which is bound to a listbox. It works (mostly) with a few exceptions, one being i was to restrict the height of the listbox to the number of entries (upto a maximum number), so a bit like a combobox (which in effect is what I'm writing). One of the problems is when the number of entries changes there does not seem to be an event raised, although the OnDrawItem is called for the items to be displayed (the displayed ones!) Is there anyway to find out (in a derived listbox) when the number of entries has changed in the datasource?
View 4 RepliesI'm trying to make the textbox field active when listbox selecteditems is change so I know I have to but something in the selecteditemchanged action of the listbox, but what?I tried:
Private Sub ListBox1_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ListBox1.SelectedIndexChanged
TextBox1.Enabled = True
End Sub
But it didn't work..
In my application I have a listbox and SelectionMode should be MultiSimple because users need to see which items they selected. In another tab we have another listbox this one should show all the selection users had done in first tab. Private Sub
[Code]....
Is there any way to get the index of the changed item? I couldn't find any examples.
View 1 RepliesI have a window which has 8 items in a listview along with 2 radio buttons below the listview. The user is able to select one or more selections in the listview and turn the selection on or off with the radio buttons(live, prior to hitting the submit button), my question is how do I tell which selection was changed? I was going to put the one or more selections into a string/array and use that later for some messages once the user hits the submit button. I can almost think of it but can't quite get there, i'll be using an if/else with the .selected option in listview items but am not sure how to tell if the user, say,goes back and changes the option from On to Off(Off originally)to remove that option from the array.
View 2 Repliesim trying to add a text changed method to my listview item. all the items are dynamicly created so i would think id have to use an addhandler listviewitem1.textChanged addressof listviewitems_click where listviewitems_click is the generic sub to handle the click. but the listviewitem control doesnt have a text changed event, but you can rename the text in the control anyway.
View 2 RepliesI have been trying to do this for ages and having no joy whatsoever.
I have a ribbon window of the following hierarchy:
MainWindow
MainContent (Tab Control)
TabContainerViewModel
ViewModelBase
View model base has an ObservableCollection of tabs type ViewModelBase. The Tab Control itself is binding fine to these, displaying appropriate view models. I have 2 problems however, I want a "NotepadView" (Of type viewmodelbase) to be replicated numerous times (one view many view models).
At the minute, I have 4 views (NotePadViewModelx where x is 1-4) with corresponding viewmodels, this is because each view had the same text per tab. Now I have individual views per tab.
When I type into tab 1 and switch to tab 2, I lose what I typed in tab one when I click back.
I have the following setup for a treeview:
<local:BuddyManager x:Key="bmBuddyManager" />
<CollectionViewSource x:Key="cvsBuddyManager"
Source="{Binding Source={StaticResource bmBuddyManager}, Path=Buddies}">
[Code]....
The Binding and grouping work well, the only issue is when I set a particular 'buddy' to online or blocked the child nodes do not move or change.
I am trying to get this to work like an MSN Treeview where people go offline and online.
dim oXT As New Generic.SortedDictionary(Of String, MyClass)
[Code]...
I have a class that contains a collection of another class. See below
Public Class Spot
Private mActive As Boolean
Public Sub New()
[Code]....
How someone would select an item from a list box and click a button and have that item go into another listbox with it's price? I seem to be stuck on this part.
Here's my code:
I want to select the first option from the first listbox and I want to put it into another listbox along with the price of that item on the same line in the listbox. I can't seem to figure out how to that.
Public Class Form1
Const dcmPRICE_STRESS As Decimal = CDec(595.0)
Const dcmPRICE_TIME_MANAGMENT As Decimal = 695
[CODE]...
removing Listbox item from checked Listview item.The code I tried just errors out.
Private Sub ListView1_ItemCheck(sender As Object, e As System.Windows.Forms.ItemCheckEventArgs) Handles ListView1.ItemCheck
If (e.CurrentValue = CheckState.Unchecked) Then
ListBox1.Items.Add(Me.ListView1.Items(e.Index).Text)
ElseIf (e.CurrentValue = CheckState.Checked) Then
[Code]...
Is it possible to select an item in one listbox and then display the data of another listbox with the same indexed position? I am planning a project and this is something I would like to attempt but I haven't figured out how to do it.[code..]
I tried doing the above code but instead of displaying the listbox text the message box just returned false.
problem that i am facing is i want to add array of object as a single item in listbox. in vb6 i was using this Label1.Caption = Label1.Caption & Mid$ (strInput, intI, 1) & " " List1.AddItem (Label1.Caption) i was using label. caption to store object but not work in vs2008 because label.text only take text and left other values
View 18 RepliesI am trying to change an item in a selected item of a listbox.
View 1 RepliesI need some code that goes through each item in a listbox and executes a for next loop for each item
View 9 RepliesI have 2 listboxes on my form.Listbox 1 - populated with "available" field namesListbox 2 - populated with "selected" field names.There cannot be the same field name in both listboxes - it's either one of the other.The logic I was going to apply was to populate Listbox 1 with every field name ... and then as I populated Listbox with the field names which the user has already selected, remove the corresponding item from Listbox 1.
View 8 Replieshow to add listbox item to another,when listbox r created dynamically.
View 3 RepliesJust want to ask this. I have a jQuery that move listbox item to another listbox. An its working fine the item was remove. Sample: I remove item in listbox A and it was added to listbox B. But here is now the problem, when I tried to check each item in listbox A, I noticed that all items that was removed was still there. But i can see in my eyes that it was removed. but when I tried to run a code to check each items - all item that was removed was still there.
[Code]...
I have a "Form" with:
1- List Box
1- TextBox
3- Button
1- OpenFileDialog
1- SaveFileDialog
I want that clicking the btn1 it shows the OpenFileDialog and read file that it has got this structure: SKI10 1 71 0 0 18 101 19 0 29 101 30 0 40 101 41 0 50 101 51 0 62 101 63 0 81 101 82 0 95 101 2 0 0 95 165 3 0 1072 01 4 2 1 93 15
I want that it reads all Line of the File and it add an Item in ListBox for line.For example the first Item of the ListBox in this case is
SKI1
And the 2th Item is in this case.
0 1 7
I want using the StreamReader classes.And i want that when i click an Item of the ListBox it shows the Text in the TextBox and I can edit the Line and that clicking antoher button the Item will come updated with new Text of the TextBox.I have also another button for saving the Mod.I can use the AppendText and it create a new file writing ListBox1.Items line for line.
If SaveFileDialog1.ShowDialog = Windows.Forms.DialogResult.OK Then Dim file_esistenteD As StreamWriter[code].....
I have a multiple form application with a listbox on each form. I want to be able to select an item in one listbox on one form and then click a button and it show up in a listbox on another form.
View 3 RepliesI changed my Username on my computer from i.e. "xxxxxx x xxxxx" to "Dennis"
VB 2008 during a compile gave me the following error: Error reading icon 'C:Usersxxxxxx x xxxxxAppDataRoamingMicrosoftVBExpress9.0VSProjectApplication.ico' -- The system cannot find the path specified.
The file "VSProjectApplication.ico" is in 'C:UsersDennisAppDataRoamingMicrosoftVBExpress9.0'
Somewhere in the VB2008 "configuration" files I believe that I need to manually change the old path to the new path.
I found the old path in the ".suo" file. The ".suo" file is not a text file. How can I edit the .suo file, save it so that it will work?
on my Form I have a DataViewGrid and some textboxes with a save button (they are filled with additional data of the selected row).Save is disabled first, when I change something in the textboxes the save button is enabled.When the user changes a gow in the grid, I want to ask before changing the grid row, if he wants to save (if the button is enabled).I am using RowEnter but this is too late, then the selected row already changed (and my textboxes already got new data)...What event can I use to ask if I should save stuff before the user changes a row?Something like BeforeRowChanging with a chance to cancel changing the row?
View 2 RepliesI have a listbox that I can load items into.
How can I click a button where it will highlight the next item and paste it into a textbox?
Me.ListBox1.SelectedIndex = Me.ListBox1.SelectedIndex + 1
For n = 0 To UBound(openfiledialog.FileNames)
listbox.Items.Add(openfiledialog.FileNames(n))
listbox.SelectedIndex = openfiledialog.SelectedIndex + 1
Next n
my problem is that i cant add another file to my listbox, i tried to put the line listbox.SelectedIndex = openfiledialog.SelectedIndex + 1, but still it wont add another file.
I Need Some Help How Ican Go to the Last Item In Listbox
View 1 RepliesI'm trying to be able to get a tag from a listbox item, but I can't find a listbox class. All I can find is the listviewitem class. Here is my code so far:
Class Form3
dim item as new listviewitem
Private Sub AddItem() Handles Button1.click
[Code].....
The only problem is that there is no tag property in listbox1.selecteditem.
I was wondering how do i get a value of an item in my list view to be displayed in a text box without having to select the item in the list view?
In my list box i just have one number and this number changes depending what page the user is on so it could be 1, 2 or 3. What is the vb code to actually get whatever it says in the list box and store it as a variable so i can show it in a text box? I thought it would have been something like:
Code
Dim instance As String
instance = ListBox1.Items.ToString()
txtRoomID.Text = instance
There is only 1 item in my listbox i just want to get this item and display it in a text box.
i have a listbox that contains a series of numbers and i need to be able to take the top listbox item and put it into for example... a textbox.text [URL]
View 1 Replies