Load Enum Values To A Combo Box?
Jul 20, 2009I have a enum,
[Code]...
I need put the "text" value of all the above Enum values in to a combo box, how do i do it?
I have a enum,
[Code]...
I need put the "text" value of all the above Enum values in to a combo box, how do i do it?
I have a few combo boxes that need to be loaded up once and displayed multiple times (whenever the main form is opened) The reason for this is because it's taking about 10 seconds for the form to load each time it's opened due to unnecessary re-querying.
Here is an example of what I have as a combo box source and what I've done.
I've put the query, connection, etc... in a module and call it on the login form - i don't get any errors but the data does not load into the combos.
'In Module
sql = "SELECT DIR_ID, DIR_NM FROM LTC_FBS_DIR ORDER BY DIR_NM ASC"
RConStr = String.Format(RConStrFormat, LoginForm.txtUser.Text,
[Code].....
RE - FilesystemRights Enum
This Code:
Dim FSRS As Type = GetType(FileSystemRights)
For Each fsr As String In [Enum].GetNames(FSRS)
TextBox1.AppendText(fsr.ToString & vbCrLf)
Next
I have a URL lets say . some time i need to send HTTP and some time i need to send it to HTTPS for that i created a enum:
Private _protocol As Protocol
Enum Protocol
HTTP
HTTPS
[CODE]...
Now when i get value back from protocoltype it returns me integer value as enum do so tell me how to get string from enum or other substitute.
Dim targetUri As String = setting.protocolType & "://www.mysite.com"
cast integer values to an array of enum values?
View 2 Replieshow to load the combo box'values from one form to another form's combobox
Example:
form1:
cust(table name)
no(textbox)
[code]....
now i load the form1's name which is the combo values .. to form 2's combo box whixh is name of 'CName'
I've got some code like the following. I want it so that when I chose an item in 'select 1' it changes the in the second combo box but I'm not sure of the best way to go about it. Does it have to be AJax or can it be done with just Javascript?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
[code].....
In this post Jon Skeet pointed out that the following code should be changed to conform with the .NET naming conventions. Doing that would also decrease the amount of noise in the code.
[Code]...
I must admit, I was pretty much like a sheep and was following what others have done before me. I thought the prefix did not look right and then to have it twice did not make sense either. After looking at a couple of .NET Framework examples, it looks like this would be closer to the standard.
[Code]...
I don't know how to convert the following line from VB to C#:
Dim values As New List(Of T)(System.Enum.GetValues(GetType(T)))
My version doesn't work:
List<T> values = new List<T>(System.Enum.GetValues(typeof(T)));
The best overloaded method match for 'System.Collections.Generic.List.List(System.Collections.Generic.IEnumerable)'
has some invalid arguments
The constructor-parameter doesn't take it that way - what cast (or else) am I missing?
For clarification: It is wrapped up within the following generic method
public static void BindToEnum<T>()
{
List<T> values = new List<T>(System.Enum.GetValues(typeof(T)));
//...
}
I have the following code which obtains the compass direction from a degree value. I'm new to VB.Net and was wondering what is the best way to store the values, in an Enum or an Array?
[Code]...
In VS2008, you could write, for instance,
dim enumValue as MyEnum
enumValue =
And then as soon as you typed the =, you'd get a list of possible values of MyEnum. With VS2010, you have to type
dim enumValue as MyEnum
enumValue = MyEnum.
Before getting the list on typing the final. This makes for a lot more typing and seems to be a retrograde step ... is there an option I'm missing? (I have 'Auto List members checked in the Text Editor options under 'Basic').
Neat way of running across all the values of Enum?
i was looking for a way without have to use methods residing in [Enum]
I'm struggling with enums
Private Enum sizeMode
AutoSize = 2
CenterImage = 3
Normal = 0
[CODE]...
Here i'm trying to cast a string to a pictureboxsizemode: PictureBox1.SizeMode = DirectCast(DirectCast(fields(4), sizeMode), PictureBoxSizeMode)
I've added an attribute for a user readable display name to my Enum values.However my code to convert from the user readable display name back to the Enum (function ToEnum) seems very convoluted.I am wondering if I am missing a better way of doing this (I am using Visual Studio 2010 with SP1.) [code]
View 10 RepliesI'm trying to declare an enumeration and one of the names I'd like to use for an item is not usable apparently. Where I am declaring 'STEP = 3', I get this error message in visual studio: "Statement cannot appear within an Enum body. End of statement expected." Is it possible to use STEP as an item name somehow? [Code]
View 4 RepliesI am having a function which populates a combobox (cmbProjtype) as shown below,
I am trying to clear cmbProjtype before I populate again to remove duplicates whenever the function is called, but the line of code added (highlighted) is not doing it.[code]....
Which is better, using a nullable enum or adding the value None=0 to your enum list?Using nullables requires more code, but I kind of like it since it forces me to think about the possibility. Otherwise I'm liable to forget about the None enum and fail to account for it being a special case.
View 11 RepliesI've tried the code below but it always returns nothing, It should enter
Protected Function GetTotalDebitAmount(ByRef roEntryDetailRecordBaseList As List(Of PPDEntryDetailRecord)) As String
Dim iTotal As Integer = 0
[Code]....
I need some one who evaluate the part below:
If CBool(Array.IndexOf([Enum].GetValues(GetType(TransactionCodes.Debits)), CInt(oEntryDetailRecord.TransactionCode)) > 0) Then
i am new with visual studio 2008 and basic I have a combobox1 and combobox2 that are representing cities Combobox1 represents departure city and combobox2 destination city.Now i have a combobox3 that i want to load when i click it and run this sql query:
SELECT time_departure
FROM routes
WHERE (departure = Combobox1.value) AND (destination = Combobox2.value)
so when running the .exe of the application ,after selecting departure and destination ,when i click on the combobox3 ("hours") it will generate the results of the upper sql query as options to select.All i need is the code between this:Private Sub ComboBox3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ComboBox3.Click End Sub
What I am "trying" to do is to take a combo box control on my form, and load it up with data from an access db, but I dont want them to be linked so that when I change the combo box to another value it will cahnge record data. From the pics attached I have manage to load the data into the combo box, but the 2 are linked and when I try to change the combo box it creates violations in the database as its trying to change the records.
View 3 Repliesi searched for stuff to load files/forms, in this case forms from a combo box... this is what i have so far, except it doesn't do as it should..
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Select Case ComboBox1.Text
[Code]....
also, is it possible just to click the item in the combo box and have it automatically load up the form?
I am trying to read text file into combo box and text boxes. Text file looks like[code]...
I have a few trouble over here, firs when i am debugging I have an error on this line, I colored it red in a
[code]...
How can i load datagrid view combo using code? and how can i make it just like a ordinary combox, so that i can text inside of it?
View 1 RepliesI was following some code presented by another developer and for some reason the program is not reading the txt file that I created with the csv data.
Option Explicit On
Option Strict On
Imports System
Imports System.IO
[code]....
I'm working with a form that has five combo boxs, when the form loads it goes to the modQuotations where there is a public sub that loads the comboboxs with data from a database but it after its done loading the form there is nothing in the combo boxs. [code]..
View 8 Repliesi want to load customerID and customerName in a combo box. ID will be invisible and name will be visible in column using visual basic 2008 for windows application.
View 4 RepliesI want to Add Values to my combobox in Datareader.This is my code,
Command = New MySqlCommand("SELECT * FROM tableName WHERE id = '" & id & "')
Command.CommandTimeout = 30
dr = Command.ExecuteReader()
If Reader.HasRows = True Then
While Reader.Read()
cmb.Items(dr(0))
End While
End If
I have tried adding it this way but it is not working.
I am familiar with getting a selected value from a combo box but what about if you wanted to get all the values from a combo box then store those values in an array or list. The combo box would be data bound to a source and have an ID as the value member. So How would I get all the values from the combo box.
View 6 RepliesLinking Comb Box Items to a Button to load a new form
Combo box 3 has 2 items.....Item 1, Item 2
i want it so if you click on the button when item 1 is selected it will load form3 and if item 2 is selected the same button will load form 4
I have two comboboxes in my form (cbAdresse & cbVerwaltung). Choosing the value in the first combo, i get the value from the table into the textbox txtAdID. Now i try to use the value in the txtAdID as the parameter for the SQL command selecting the values from the table (tblVerwaltung). These values must be added to the second combo (cbVerwaltung). So i use the following code for the SQL Compact Client:[code]Using this code i get the following value in my combo cbVerwaltung: "System.Data.DataViewManagerListItemTypeDescriptor".[code]
View 3 Replies