I simply created a "Report" folder on the the project and "crTxEmpMaster.rpt" is created on the "Report" folder.I tried load a .rpt file for Crystal Report, but it occured "Load report failed" What is wrong wth it? #1 and #2 both failed.
Dim menuReport As New ReportDocument() '#1 Dim reportPath As String = Application.StartupPath & "" & "ReportcrTxEmpMaster.rpt"
I have created an application using vb.net 2008 and for reports Crystal Reports Basic for Visual Studio 2008 but the problem is, when I run the application in another machine away from developing box, I get the Load report failed notice. I don't have any idea on how I should approach this issue. I tried installing the CRRedist2008_x86 and CRRedist2005_x86 but still the problem won't go away.
Everything was working fine but suddenly started getting this error. I have the following code ReportName = Application.StartupPath & "" & ReportName & "" Dim ReportForm As CrystalDecisions.CrystalReports.Engine.ReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument ReportForm.Load(ReportName) - I get error at this line The path & other things are right. Till yesterday it was working fine & now I started getting this error, the only change I made in the report was I added a field.
there is one search button to see the report on datagridview using year..so when the more items are there in database correspond it year(say 2012)... the above exception is thrown by filling the datgridview,the problem happens when it tries to connect with crystal report,it shows error...Remember that i face this problem only if there are more records in my database(exactly more than 100 rows)...when i delete few rows from the database,it works fine..I have created a table and added that table to a dataset,then assigned that table1 as datasource for crystal report
there is one search button to see the report on datagridview using year..so when the more items are there in database correspond it year(say 2012)... the above exception is thrown by filling the datgridview,the problem happens when it tries to connect with crystal report,it shows error...Remember that i face this problem only if there are more records in my database(exactly more than 100 rows)...when i delete few rows from the database,it works fine..I have created a table and added that table to a dataset,then assigned that table1 as datasource for crystal report
Public Class crystalform1 Dim r As DataRow Dim t As DataTable
I'm using maysql phpmyadmin i just had this error for my crystal reports
Dim myReport As New ReportDocument Dim myData As New DataSet1 Dim conn As New MySqlConnection Dim myAdapter As New MySqlDataAdapter conn.ConnectionString = _
Why I've choosen this forum (VB.Net) instead of Reporting is this seems not a matter of reporting. When I load the report normally, it works fine. When I export the report to Excel, it works fine again. After that when I tried to open the report again, it gives the error : "Load Report Failed" . I've to restart my application for make it work fine again.I'm using a Crystal Report Viewer control to load the report.
I'm building an asp.net web application using Microsoft report viewer. It connects to a SQL database using integrated security. However when I first load the report page after it has been published to the server (everything works fine locally), I get this error:
An error has occurred during report processing. Exception has been thrown by the target of an invocation. Login failed for user 'SERVER NAME REMOVED'.
The weird thing is that when I click the refresh button on the report (not IE's refresh button), it loads just fine. I know that login will not work for the database server, but why is the report viewer not using the integrated security I set in the web.config?
I upgraded a working VB.net windows application from VS2008 to VS2010 (a fairly simple form to process some data) and I get 15 warnings "Load of property 'X' failed" where 'X' refers to what looks like system variables like OutputType, StartObject, RootNamespace, AssemblyName, Option Explicit and so on. I also get two errors pointing to the Form1.Designer.vb file which I is the DesignerGenerated file saying that "My' is not a member of '<Default>'Originally I just used the upgrade wizard, resulting in these warnings. Next I tried creating a new project and adding the relevant files using the VS "Add Existing" function. I have also looked for answers in the forum and on-line but found none. This has got to be something simple I am overlooking.
I am trying to add a new user control to an existing project that contains about a dozen existing user controls. The project builds with no problems and my new control appears in the toolbox, but when I try to drag the new control on to a form I get a message box saying "Failed to load toolbox item 'XXXXXXX'. It will be removed from the toolbox" The project was originally created with VS2005 and has been upgraded to VS2008. What do I need to do to fix this?
I've just started developing with .net CF 3.5 for windows mobile 6.5. I'm using VB 2008 as my IDE and I am having trouble with ServiceController.
Here is what I have so far: Private Sub Stop_Service_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Stop_Service.Click ' Toggle the Messaging service - ' If it is started (running, paused, etc), stop the service. Dim sc As New ServiceController("MessagingService") [Code] .....
The problem is with the bit in bold. The debugger says the following: Error 1 Reference required to assembly 'System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' containing the base class 'System.ComponentModel.Component'. Add one to your project.
I've checked and the system object exists but it is marked in the object browser with brackets as "Compact Framework". I have tried to remove this and replace it with one not labeled with "compact framework" and the error does go away but then the application doesn't run in the WM 6.5 classic emulator Producing a "failed to load all components. Please make sure you have enough space in storage memory or try reinstalling .Net CF error".
I've had to backwards convert my SSIS 2008 package to 2005 including converting all the C# script tasks to VB. After finishing this and getting it to run fine from Visual Studio, I went to deploy it to the server but when I import the package through SSIS into the 'File System' I get the following error:[code]Now when I open the package file up and go to that line this is what I have:[code]
This problem seams to be in other forms without any concrete solutions. I figured id post it here since i am running into the same problem and i am sure you have at well at some point (if not then you will soon...lol). The problem is this error is appearing when i open a form in designer mode.
Right now I have controls that are in my update panel and change the data in my gridview they work fine, but then i thought it would be cool to have the controls in the header of my gridview. But when i add them to my header and hit the button/run the function i get the failed to load viewstate error.[code]
When I start VS2008Prof I get a Package Load Failure "Package 'Microsoft.VisualStudio.Xaml' has failed to load properly". Repairing VS and resetting ('devenv /resetsettings') it did not help.
this error is appearing when i open a form in designer mode. A picture showing what happens to VS when this error occurs.The error code is:One or more errors encountered while loading the designer. The errors are listed below. Some errors can be fixed by rebuilding your project, while others may require code changes.Unable to cast object of type 'System.Diagnostics.DebuggerNonUserCodeAttribute' to type 'System.Attribute'.
Suddenly today , when I started my computer and went on to open the VS , I got this strange message: Do you know what it might mean ? I didn't installed anything on my PC for a long time, so I can't think of anything ...
I get a strange error when I am dragging tables from the server explorer into the datasetSome updating commands could not be generated automatically. The database returned the following error:Failed to find or load the registered .NET Framework Data ProviderI never had it before. I reinstalled .NET Framework 3.Some specs:
Local SQL Express 2005 Windows authentication Visual Studio 2008
I am new to Visual Basic (I currently have VB 2008 Express to play with) and have a question about automating MS Access applications.I have a number of MS access applications that interact with MS Excel, Windows commands and Adobe writer.The applications have multiple forms that require input and/or selection from dropdown list which are repeated for 15 different selections manually.Rather than change the application can I write something in VB to perform the manual process of filling foelds and clicking buttons? e.g. I can open a DB, display a form and then this requires two fields to have a date input, then a new form loads and a dropdown is selected. This is used to generate a report.I can see how to run the report and load forms, but can/how do I update the fields in the form.
I have developed a windows application on vb.net 2008 and deployed it on client machine my crystal reports are configured through DSN to server everything is going fine om my development machine but on client machine producing is "Load Report failed" . I have added Reports folders and all RPT files in that folder in installation package through file system.
Dim path As String path = Application.StartupPath.Substring(0, Application.StartupPath.Length - 10) Dim fullpath As String = path & "Reportsslip.rpt " cryRpt.Load(fullpath)
I have a form which has crystal report viewer. On form load it gives the following errorAn error occurred creating the form See Excpetion.innerException for details. The error is :Could not load file or assembly 'CrystalDecisons.Windows.Forms, Version = 10.5.3700.0, Culture=neutral, PublicKeyToken = asdad or one of its dependencies. The System cannot find the file specified.
I am having trouble loading and displaying my .rdlc report file in my reportviewer. I've been all over the internet and nothing worked.I think it might be because i am using vb.net 2008.Also I am wondering if there is a click event in Microsoft Reports or in Crystal Reports where I can link certain data in my report to other files in my project, eg. form2.vb
I am new in VB 2005. I have problem loading data in report viewer, data loaded successfully but it is not the current data. I am entering production details into the database (access 2007) . It will add successfully. Then I open production report there is no current updated data. It will show when I close the vb 2005 and reopen it.
Code: Private Sub Report_Production_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 'TODO: This line of code loads data into the 'hajarDataSet19.stockdetails1' table. You can move, or remove it, as needed. Me.stockdetails1TableAdapter.Fill(Me.hajarDataSet19.stockdetails1) 'Dim rds As New reportdatasource Me.ReportViewer1.RefreshReport() End Sub End Class
i am trying to load a filter on load of a report in my database. here is the line of code, i know i am close but i just cant get it right, i know the titles of all the forms, queries and reports are all correct but i am missing something still and cannot figure it out.
Me.Filter = "qryVisa list.[Country] Like " + Chr(34) + [Forms]![frmPassports and Visas]![Combo24].[Value] + Chr(34)
Synopsis: I have a report generated from the report wizard in VB that works, but I only want to load data from the same department as the current user.
Details: The application connects to MySQL using the MySQL Connector/Net. I have a users table in the database, one of the fields is "Dept_ID." The report I currently have works loads data and everything fine, but I only want to load some of the data from the table, specifically where Dept_ID matches the current user's Dept_ID, basically adding the "WHERE" clause to the select statement.
I used the report wizard to generate the report and data table, etc, just followed from step one. I've looked around and have found something about using parameters, but can't seem to figure out how to pass a variable to the parameter, or if that is even the best option. Using the wizard, I don't have any code to show for it and the report works like it should, I just need to figure out how to configure it further.