I am trying to make a copy of an existing database, I use .net framework data provider for SQL Server.I get error "Unable to connect to source server for Transfer" when it runs to oPackage.Execute().
oConnection = oPackage.Connections.New("what the providerID should be?")
oStep = oPackage.Steps.New
oTask = oPackage.Tasks.New("DTSTransferObjectsTask")[code]......
My windows application was written in vb.net and i recently added a web service to it so that I could place the access database in it and connect to it via the web server. I've been succesful in receiving data when doing select statements; however, I'm stuck when trying to do a simple insert statement to it.
[Code]....
How can I write a connection string? I has four different computer that can be connect via ethernet.How can I maintain a inserting data if to computer insert on same table at a single time..??
View 1 RepliesI am able to connect to the sql server 2008 express by using this as connection string
View 10 Repliesi added the bindingsource control on my winform. here are the details of my connection:[URL] when i test the connection, it says "the connection cannot be tested because the specified DB file does not exist" the DB is located in [URL]. how should i set up bindingsource?
View 2 RepliesI have created a server-client application in Vb.net with back end Mysql .In client while am trying to run its showing the following message
"Unable to connect to the specified MYSql hosts"
I need to read a command from a .html file. To do this I use:[code]My application constantly loops to check the .html file for commands. I need it to do this, even if the internet is off. Obviously, it wont read commands if its off.. I just need it to resume reading when it comes back on WITHOUT crashing my application.Any code to ignore timeouts so where my application will still TRY to read and not crash.
View 3 RepliesSystem.Net.Mail.SmtpException: Failure sending mail. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A socket operation was attempted to an unreachable network 184.xx.xxx.xx:25 at
[code].....
I have created my asp.net website using database ASPNETDB.MDF but when I try to host my site on server ...
The SQL Server 2005 hosting provider issue me the
database name dobriyalji
server ip : 69.112.222.220
database username : XXXX
[Code].....
Uneable to connect to BBDD MySql in Virtual Server with Parallels Plesk Panel.
Does any one know how to connect to a Parallels Plesk Panel Server (my host is 1&1)?
An Error has occurred while establishing a connection to the server. When Connecting to a SQL Server2005, this failure may be caused by the fact that under the default settings SQL server doesn allow remote connection (provider: Named Pipe Provider, error: 40- Could not open a connection to SQL Server)I want to connect to the SQL Server 2005 Express Edition which is running on my system from a VB.NET application. I am using Visual Basic 2008 Express Edition. Here is the Coding,
Dim sqlConn As SqlClient.SqlConnection
sqlConn = New SqlClient.SqlConnection("server=localhost" & "initial catalog=LIB")
Try
[code].....
I really need to know if its possible because I'm making a messaging client since me and my friend find believe MSN is getting buggier. I've looked on how to do it but none of them worked for me, or were server to client. I want to make it client to server to clients but I don't know how! I know I shouldn't tell you to give me code but maybe give me a few tips on this. Me and my friend share files nearly everyday.
View 11 RepliesI want to know how to connect to a remote system having some shared folder.(ex, \myservermysharedfolder).Actually, I was supposed to copy a particular file which is available in a shared location of a system. To copy that file, first i need to connect to that system with an user id and password.I know copying of file (), But not getting clear idea on how to connect to the shared folder. I have tried with System.Management class, but no use..
View 2 Replieshave this code to connect to local server:
[Code]....
In my scenario, users are able to upload zip files to a.[url]....I would love to create a "daemon" which in specified time intervals will move-transfer any zip files uploaded by the users from a[url].....From the info i gathered so far,
The daemon will be an .ashx generic handler.
The daemon will be triggered at the specified time intervals via a plesk cron job
The daemon (thanks to SLaks) will consist of two FtpWebRequest's (One for reading and one for writing).
how could i implement step 3?
Do i have to read into to a memory() array the whole file and try to write that in b.example.com ?
How could i write the info i read to b[url].....?
Could i perform reading and writing of the file at the same time? No i am not asking for the full code, i just can figure out, how could i perform reading and writing on the fly, without user interaction.I mean i could download the file locally from a.example.com and upload it at b.example.com but that is not the point.
I want to know how you can export data from a disconnected database that could be access or ms sql to an sql server database.
Here is the scenario:
I have several software in a remote sites on either sql or ms access databases as back-ends...and I have another sql server database that i want to consolidate data from the remote sites.
One solution I have been thinking about is to use email to send incremental backups of the databases to the main database using a separate piece of software and have another one on the main server to pull that data into the database.
Basically am looking at setting up the remote databases as linked servers at the main database and then having incremental backups sent by email to the main database.
I have thought of replication but the internet link at the sites is terrible.
Is that a good implementation? If yes
How do i get to send the incremental backups and get them imported?(the code)
Tools:
Visual basic 2008 standard edition..Net 3.5
SQL Server 2005.
32 bit architecture.
im wondering how do i make my vb app connect to my fpt server and record there ip or something like that then display how many ppl have used my app?
View 2 Repliesthe next issue, that is only shown when the server is a Windows server 2008 machine , this is the information that I've found
[Code]...
my friend tell me .they use file.txt,file.ini,file.xml and registry for save connectionstring for connect to database and what do you use save connectionstring.
View 6 RepliesI will use the Background Intelligent Transfer Service (BITS) to transfer files from a client (laptop) to a shared folder on a server within our local network.The problem is a very slow network bandwith, if we transfer a file, the other clients canīt work, all requests to other clients (application) or viewing internet pages needs a long time.My idea is to use BITS in my tool to copy/transfer a file from client to server, also I hope to get more performance for the internet requests.
View 2 RepliesI planing to develop an application which can connect any remote server and pick the configuration information from server and show it in my desktop.
View 4 RepliesI am writing a custom application for IMAIl express 11.5 using IMAIl Server API for .Net
I am using the following code:
Dim DomData As New DomainData()
DomData.Aliases = "TestALias"
[code].....
In the beta version of Beta2 of Visual Studio Professional, when I choose add new connections, I can select a I can select a " SQL Server (SQL Client)" datasource, which works great with my SQL Server Express DB running on the local machine.
In VB2008 Express, though, I can't select a "SQL Server" in the datasource dropdown. I can only try to connect to a Microsoft SQL Server Database File.
When I actually try to connect using the .mdf file that is being managed by my local SQL Server, I get an connection error -- can't make connection to the server (and the usual message about enabling remote connections".
Im a beginner at vb.net, and just wanna ask if it is possible to make a vb.net app/client app that can connect to a database on an online web server???The app is locally on the client computer and the database is uploaded on the web server/host together with its website.
View 4 RepliesI have a database in MySQL server called MD
View 2 RepliesI'm trying to connect to a sql server 2005 database. I'm using the following connection string.
Dim cnn As OleDbConnection = _
New OleDbConnection("Provider=sqloledb;Integrated Security=SSPI;Initial Catalog=Iconics")
Using this connection gives me the following error :
Error : Microsoft OLE DB PROVIDER FOR SQL SERVER : [DBNETLIB][Connection open(connect()).]SQL Server does not exist or access denied.
Does anybody know what is wrong with this connection string.
I am using Visual Studio 2008. I have created a visual basic form that allows user to enter his details. Now I need to store the data entered by the user in the SQL database. Can anyone tell me how to connect my form to the database. I am new to Visual Basic, so can please anyone provide me with some links regarding the same.
View 1 RepliesI am having a small problem... I can connect to a local MySql Database using:
SQLConn.ConnectionString = "Data Source=servername;" & _
"Initial Catalog=databasename;" & _
"User ID=username;" & _
"Password=userpassword;"
Where servername is "localhost". I need to make a connection to an online database (same data structure). What should I put at the servername in that case? I do have all the info about the database in question (Domain, Ip, etc...). Which part should i use?
I can connect to both databases with SQL Server Enterprise Manager, so I know the servers are up and available. One of them is SQL1, the other is SQLTEST.In my program when I use the following connection string, it work connects just fine:
conn = New DBConnect("Data Source=SQL1;Initial Catalog=SignInspection;Integrated Security=SSPI")
However, if I change SQL1 to SQLTEST the connection times out I don't get any errors other than the timeout error.I can run the profiler on SQLTest and see that it is most definitely NOT even attempting to connect.
EDIT:Well, it's a moot point now because I got authentication working properly on our SQL1 server.
First off, the web server is running IIS and .NET. Users are logged in to the intranet using Active Directory, and the .NET page needs to retrieve their log-in credentials (username most notably). The database is SQL Server 2005, running on a different machine. But the .NET app needs to impersonate as another user to connect to the database.
To successfully do both of these things go to Windows > Run, enter inetmgr and hit run. Navigate to the site and right click > properties, then click on the tab titled Directory Security, click Edit.., make sure only Integrated Windows Authentication and Digest authentication are enabled. Enter your proper AD realm and click OK. Apply the settings/hit OK.In web.config you need the following lines
<authentication mode="Windows" />
<identity impersonate="true" username="myDomainMyUserName" password="123mypasswordgoeshere">
replacing, of course, myDomainMyUserName and 123mypasswordgoeshere with the username and password that has login rights on both your domain and your sql server. The connection string can probably be modified, but this is mine and it works:
Server=SQL1;Database=SignInspection;Trusted_connection=True;
At the momment of the creation of the my connection string a receive the following error:
Format of the initialization string does nor conform to especification starting at index 144