Is there a built-in way to multiply every member of an array by some number in-place?
Example:
Dim volts () as Double = {1.243, 0.534, 5.343, 2.223, 4.334}
Dim millivolts (4) as Double = volts.MultiplyEachBy(1000) 'something like this
I am doing a bar cash register and I want to use a if statement to see if fosters button and number 1 on the number pad are both pressed then multiply constant by quantity number
View 1 Repliesi am creating a currency calculator and need to multiply the number in textbox1 with the number in textbox 2 (exchange rate) i also have a £ or a $ depending on the currency selected.
View 9 RepliesMy goal is to connect to my database either manually or using an sqladapater, and get information from two of my databases on sql server 2005. Then I want to take this information and on run-time begin to add/subtract/divide/multiply certain columns and place the information into other columns. I can do this in queries, however, I want to do it on run-time what is the best way to achieve this.I had some of this working, but I just want to start fresh and see how you would go about doing this.
[Code]...
Ok, now I have another problem that I cant seem to figure out I now have the "Labour charge section" just incase the service requires one. which in alot of cases it does. So, I have a test box called text box 1, which I want to be able to insert "hours worked" which is a "digit" and then Have a fixed value, of five. Which the user can later change. The number from the box, and the user specified Hourly charge, must then be multiplied to create the total labour charge which will be inserted into a label view. So, my question first, is, how would the user be able to set the hourly charge and then not be able to change it by accident. I was thinking of having a tool strip with an options tab and then setting, and then you use that to fill the info, and have that hourly charge, hidden of the actuall form so that it cant be changed by mistake. Then, on to of that, how would you multiply these two numbers?
View 39 RepliesI have been battling with this problem for months with virtually no success.
I am using Visual Studio 2008 Professional. The database is Microsoft SQL 2005.
I have an unbound datagridview with two combo boxes � both bound to database tables. These are:
Combo box 1 is for VAT and is bound to the VAT table. This table has 3 columns configured as shown below[code]...
I have an application that has 3 list boxes, one selects a workshop, the other a location. the third is to display selected costs.to do the calculation a loop is required. i have written the code but when i calculate the cost the final result to be displayed ends up as being the cost of the last work shop and location * 3,What is supposed to happen is the location is multiplied by the number of days(3 in this case) and added to the workshop cost.the loop is supposed to add all cost from the list box till all have been added.what is happening is the calculation goes to the last entry as stated the multiplys this total by number of days(dbl)?
View 1 RepliesI am trying to create the following program Store in a 1d array a set of 5 place names and in a 2d array the distances between the places. Ensure that the order of the places is the same in both arrays. When the names are places are input the distance between them is displayed. If they are not both in the table a suitable message is displayed
Dim town(1 To 5) As String
Dim Dist(1 To 5, 1 To 5) As Integer
Dim First As Integer
[CODE]......................
I think the best way forward is pass a parameter to the function findnumber.
how do I overcome it? I have created a class and compiled into .dll This code
[Code]...
In Visual Studio 2008, if I do this:
[Code]....
Does anyone here know how to get the above to work WITHOUT warnings being generated?
In the following code i get a warning at line 59:Warning 1: Access of shared member, constant member, enum member or nested type through an instance; qualifying expression will not be evaluated.and.. At line 78 I get this Warning:
Warning 2 Property 'SelectedCustomer' doesn't return a value on all code paths. A null reference exception could occur at run time when the result is used.
The program compiles and runs well, but i cant' undesrtand the reason for these warnings. Any Idea ?
1: Public Class Form1
2:
3: 'Form level members
4: Private objCustomers As New ArrayList
[code]....
How would I find the place value of a number?
View 7 RepliesHow can I get the number of the decimal place, example 1.30 then it should give 2, for 5.0101 should give 4. I'm now doing that:
[Code]...
Cannot appear to be able to get this function to not have the above error.Private Function GetIncidentActions(ByVal FromAgentID As Integer, ByVal ToAgentID As Integer, ByVal incidentAction As Integer, ByVal ActionDate As Date) As String
[Code]...
I'm having trouble assigning values to an array and am getting the error, "Value of type MemberFocal.Member cannot be converted to System.Array" - MemberFocal.Member is part of a custom class and I am attempting to create an array of these objects. Here is the code:
[Code]....
I need to check whether a certain number is a member of the array. Is this a good way?[code]
View 1 RepliesHow can I take recorded coordinates (x,y) and place them into an array? I have the variables set up and everything, but I am unsure how to declare the array for this purpose and how to take what I have in the array and graph the coordinates later on.
Here is the relevant
vb.net
Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick
TextBox1.Text = TextBox1.Text + 1
[Code].....
The following code get an error in IDE when ADD method is used on Methods4Cost. Generic List of should work fine but IDE complains "'Add' is not a member of 'System.Array'".
System.Collections.Generic
Dim Methods4Cost() As List(Of CostMethods)
Dim values As String()
Dim costmethod As CostMethods
[Code] .....
How to place units and their men on the form but I cant seem to get this array to work. It has multiple errors in it.
Dim pic(calctroops()) As New PictureBox
Dim z As Integer = 15
For i = 0 To Form3.orcunits
For x = 1 To Form3.orc(orcunits)
z = z + 15
pic(i).Location = New Point(Orc1.x + z, Orc1.y)
pic(i).BackColor = Color.Green
Me.Controls.Add(pic(i))
Next x
Next i
I got this error within my code and haven't been able to figure out what is wrong with it,im not sure if im doing this Array Correct that could be the reason just looking for some guidance.
Dim imgPictures() As Image
imgPictures.Add(My.Resources.Red)
imgPictures.Add(My.Resources.Blue)
[code].....
why the following code
Dim myStrings(My.Settings.test.Count - 1) As String
My.Settings.test.CopyTo(myStrings, 0)
DataGridView1.DataSource = myStrings.Select(Function(s) New With {.Value = s}).tolist
would be giving me grief in an existing app but work fine when i put it a new project starting from scratch. I'm getting the following error:
Error 6 'Select' is not a member of 'System.Array'. C:Documents and SettingsAdministratorMy DocumentsMy ECUCSG3303Citation Browser v2.6Citation BrowserfrmCitation.vb 43 36 Citation Browser
I have a function in a VB.Net script file, but it produces the error 'CopyToDataTable' is not a member of 'system.array'.
Public Function CollectionFromTable(tableName As String, sql As String, sortOrder As String) As DataTable
Dim foundRows() As DataRow
[Code]....
I haven't had this problem before. For some reason, when I declare a variable,I.E.rand as a new random(), and try to use rand.Next, i get an error saying 'Next' is not a member of system.array. Not sure why this is happening.
[Code]...
I'm having trouble understanding why i'm getting the error 'add is not a member of system.array'I'm using an arraylist and when I hover over my declaration of memberarray As ArrayList() the tooltip states 'Dim memberarray as System.Collections.ArrayList()[code]
View 1 RepliesI'm using .NET Framework 2.0 for my application, but I need to get a part from a byte array.Normally I would do this (ByteArray.Take(Amount).ToArray), but Framework 2.0 doesn't have a Take member. Is there a replacement for this?
View 12 RepliesI created a custom class for a custom object. I instantiate like so[code]...
Now, I have two problems. First, right now this is just overwriting the same object properties, again, and again. I need to somehow dynamically name the object. Then, I need to place these objects in an array so I can iterate through them...
I need to write a program that requests a high number and a low number from the user, then the program searches the array and finds all elements within the two numbers. The program is used to search for past presidents, so if I type 43 for low number and 44 for high number, the program will display:
George Walker Bush
Barack Hussein Obama
I think I have an idea of how to search up to a certain point, but not to stop at a certain point....Here is the code that I have for that particular sub procedure:
Quote:
Private Sub btnDisplayRqst_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDisplayRqst.Click
Dim sr As IO.StreamReader = IO.File.OpenText("PRESIDENTS.TXT")
[CODE]...
Trying to upload a picture file from an online source and store it in a byte array but am having the error: "Number of Indices is less than the number of dimensions in the indexed array".
Dim Bytes() as Byte
Dim Inet1 as System.Net.Webrequest
Is it possible to find a particular string present in a string array?Example
Dim myString as stringmyString = "abc"
Dim myStringArray() As String = {"rg", "grg", "grg", "dgdg"}
Is there any way to find myString is member of myStringArray, without writing any loop?
I am trying to make a network tool. And i cant find how to make a a portscanner.
So i taked a look at the internet and founded the following code:
Private Sub btnScan_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnScan.Click
Me.CheckForIllegalCrossThreadCalls = False 'Now you can Add items through a thread
[Code]....
It gives me the following error : 'Add' is not a member of 'System.Array'