I created a custom class for a custom object. I instantiate like so[code]...
Now, I have two problems. First, right now this is just overwriting the same object properties, again, and again. I need to somehow dynamically name the object. Then, I need to place these objects in an array so I can iterate through them...
I have an error while using a collection that has been stumping me for years.I wrote a class to allow users to write equations in a txt file using RPN (stack based notation).The class runs through a select statement while reading the equation and then ends up with a final number as the answer. I have a collection to place these objects in for easy reference. For whatever reason I get random object reference not set to an instance of an object errors when there is nothing in the program that would remove objects from the collection, kill objects, or change the collection in any way. It is possible for one thread to call the calculate function while another thread calls the CurrentValue property. I'm not sure if this could be causing the error, but once it happens I get an error every time the program enters that code until I run out of memory.
[Code]...
I am learning Visual Basic 2010 and I am working on a space combat program for my own education and amusement (a simulation of the Honorverse space combat system). I have a routine to add ships to the enemy ship roster and then place them randomly on the viewscreen. When I step through the sub with the debugger, it works fine, but when I run it without stopping, it wants to place all the objects in the same place on the screen. It's actually assigning 2 random numbers pertaining to the size of the viewscreen and assigning those numbers to GameObjectScreenLocation through GameObjectWorldLocation.X and GameObjectWorldLocation.Y. The objects are fully initialized to 0 in their constructor, FYI. Code is below:
[Code]....
dynamically creating buttons with images in them and then accessing the on click event for that button. However lets say for example I have three buttons created during run time, button 1, 2 and 3 for simplicities sake. Each button needs to correspond to a value (lets say one, two and three). The problem comes in when i want to, for example, click on dynamically generated button 3 and have it display "three" in a message box. But button 2 might close the program. How can i reference an event when i don't know which button corresponds to which action..
View 4 RepliesI am trying to create the following program Store in a 1d array a set of 5 place names and in a 2d array the distances between the places. Ensure that the order of the places is the same in both arrays. When the names are places are input the distance between them is displayed. If they are not both in the table a suitable message is displayed
Dim town(1 To 5) As String
Dim Dist(1 To 5, 1 To 5) As Integer
Dim First As Integer
[CODE]......................
I think the best way forward is pass a parameter to the function findnumber.
I am trying to make a simple demo of a DataGridView bound to a database table. I want to add a row, delete a row, and save the table. I used the IDE to do just about everything. It created the BindingSource when I set the datasource of the DataGridView to a table of a DataSource I added to the project.
Now the only code looks like this:
Public Class Form1
Private Sub DataGridView1_CellContentClick(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles DataGridView1.CellContentClick
End Sub
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code] .....
I set the AutoIncrementStep to 1 in my Key field in the dataset (the .xsd). I left the Key field visible in the DataGridView and it seems to be adding the correct Key when a row is added. However, I still occasionally get the "concurrency violation" error if I just mess around with these 3 buttons. Any idea why/how to prevent that?
I have a code that dynamically generates some pictureBox-es. What I want to do is to save them so that they will aslo appear the next time the application is opened. Also i don't want to use an external configuration file so that the controls are generated on file-read.
Also I also have some controls that are generated by the designer
In my application I'm dynamically generating multiple rows of dropdowns and populating it with the field names based on the selected table value. Based on the field name selected I want to display a tool tip containing the selected field data. how I can use the tool tip for dynamically generated columns.
View 2 RepliesI've written a for loop to generate several new text boxes and numericUpDowns when the application is run.
The text boxes / numericUpDowns are generated with a 2-dimensional array. My question is: How do I handle when the text boxes / numericUpDowns are modified?
If you would like the code, just request it and I'll add it here.
I have dynamically generated some number of buttons. Now i need to manipulate them in such a way that clicking on one button should do something on another button. How to do it? I would prefer the code to be as simple as possible as i am tutoring amateurs.
Private Sub NewButton(ByVal ButtonNumber As Integer)
' set the button properties
btn.Name = "Button" & ButtonNumber
[Code].....
My goal is to take some form inputs and prompt the user to download a summary of everything once a certain button is clicked. I have no need for the file once it is downloaded and so I'd like to have a solution where the data is streamed directly to the user. My current solution doesn't even prompt the user for a download. Can anyone point out what I'm doing wrong?[code]....
View 2 RepliesI have a web browser control in my windows form. I am trying to automate some process in a website. During this process, the invoice pdf has been generated dynamically and shown in the web browser control. I need to save that pdf locally. Please note: there is no direct link to download the pdf. I googled a lot past couple of days and haven't found any solution yet.
View 1 RepliesOn my main form I have a 9 button grid that I need to fill with a gradient colour so that it represents a "heat map" going from Green (lower left) to Red (upper right). The "heat map" needs to be generated dynamically as - if I use an pregenerated image I have noticed colour variances when working on different screens / projectors as in the app there are other dynamically generated graphics & the two sets of colours need to match.So to achieve this - on my main form I have a PictureBox that I fill with the gradient colour.On top of the PictureBox I place my grid of 9 buttons.I then hide each button & take a screenshot of what is behind it & that then becomes the background image for the button. The button is then made visible.All works fine when I am testing in on a simple form The issue is that this arrangement needs to be placed on a tab control & I'm having difficulty replicating what I could do successfully on the simple form.....
Code for the colour gradient :-
Dim A As Integer
Dim B As Integer
Dim C As Integer
Dim D As Integer
[code]...
The code below loads 4 Tab Pages at runtime to a TabControl. If I have UserControls in my toolbox, I can't just drag and drop the user control onto these TabPages because they don't exist yet! How do I accomplish this dynamic loading of UserControls onto the Tab Pages as they are created?
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
[code]....
I have created a Stored Procedure in SQL which produces a pivot table. I've successfully created a GridView in ASP.NET to display this data.
However, some of my column headings are dynamically generated from the data (AutoGenerateColumns=True), and those column headings are just dates, so they will look different almost every time the table is generated.
This all works fine, except that the date format of the column headings is wrong. I know I could change the way SQL produces the dates in its output, but I don't want to do it that way. I want to control it from the web page.
I didn't think this would be difficult - I thought I could just do something along the lines of finding the cells in the header row and changing the datastringformat. The problem is that whether I put my code in the GridView's DataBound or RowDataBound event, the cells in the header row seem to be empty, so I can't reformat them. It's as if the headers get populate some time AFTER the DataBound event, but I don't know when or how to trap it.
I have used the following code to generate buttons dynamically. I want to know how to code in such a way that if i click one button, there should be some change done to some other button in the same form. Since all the buttons are generated in the loop, i do not know how to call one button elsewhere in the code.
Private Sub random2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim i As Integer
[Code].....
Am on creation of touch screen UI system.And am generating button for selecting products
Under certain category.
--> array of button creating dynamically And placing in TABPAGE when user selects Tab for category. The button will be created with the name of products, Under the category selected.
{
'the way am creating controls.
mybutton(j) = new button()
mybutton(j).top = 100
}
How can i get the Click event of those buttons-( in the array)....??
To set the scene, I have implemented a drag and drop rearrange in a FlowLayoutPanel (thanks to a few good Tutorials) which worked absolutely fine until the client decided that he needed many Panels each contained in the Tabs of a Tab Control.Ironically the FlowLayoutPanel rearrange still works if the panel is not in the Tab Page. However the moment it is it stops functioning completely.In all honesty its probably a simple issue that I'm missing but I can't seem to find an answer. I'm certain that the issue is in the following block of code, most probably in the following place:If controlcoll(i).Bounds.Contains(mouse.X - flow.Left, mouse.Y - flow.Top) Then Either that or in a property of either of the controls. [code] The Panels, Tabs and Buttons (which are what need to be rearranged) are all dynamically generated.
View 1 RepliesI'm coding an ASP.NET page, with VB code behind. When the user clicks a button on the page, I send them an email with information and instructions. Rather than sending a plain text email, I send a nice, pretty, HTML-formatted one. Right now, I'm doing this in a way that I KNOW will be difficult to maintain. That is, I'm straight up writing out all of the html. [code]...
View 4 RepliesI'm creating a PDF file on the fly using ITextSharp and ASP.NET 1.1. My process is as follows -
Create file on server Redirect browser to newly created PDF file so it is displayed to user
What I'd like to do is delete the PDF from the server as soon it is displayed in the users browser. The PDF file is large so it is not an option to hold it in memory, an initial write to the server is required. I'm currently using a solution that periodically polls for files then deletes them, but I'd prefer a solution that deletes the file immediately after it has been downloaded to the client machine. Is there a way to do this?
I want to create a form where the user can upload as many images as they like with the input areas being dynamically generated. I can't use Ajax for this I need to use ASP.NET controls and the images are being written to a database. Any ASP.NET control that can accomplish this? Here is my code for the dynamic form, its Javascript and its not passing the "PictureSmallLink" value back...and their in lies my problem.
<input id="PictureLinkSmall" name="PictureLinkSmall" type="file" runat="server" size="60" />
<input id="AddFile" type="button" value="Add file" onclick="addFileUploadBox()" />
<!--<p><asp:Button ID="btnSubmit" runat="server" Text="Upload Now" onclick="btnSubmit_Click" /></p>-->
<span id="Span1" runat="server" />
<script type="text/javascript">
function addFileUploadBox() {
[Code] .....
I have an asp.net web forms application. In this application, students upload assignments and submit a survey along with it. For the survey, I read values from DB and dynamically generate ASP.NET Controls like radiobuttonlist, checkboxlist, textbox on the form during gridview's RowDataBound Event. I cannot do it in Page_Init method because I create only if a user click on a specific assignment which requires a survey to be submitted.
When I submit the survey form, the survey values are not saved into database. During debugging I figured it out that the values are not available in the codebehind page. The radiobuttonlist.selectedvalue returns and I get following error[code]....
I'm trying to produce a repeater showing amounts of money taken by various payment types into a table.Payment types available come from a global settings file as an array, I am creating a dataTable by looping this list and extracting sales reports (there might be a more efficient way than this loop, but this is not my concern at the minute).My question: How do I bind this to a repeater and display it when I dont necessarily know the table column namesI've tried various methods to give the table a header row and give the columns numerical names from a for > next loop, but am either getting no results, orystem.Data.DataRowView' does not contain a property with the name '7'. < or whatever numberThis is where I currently am:
EDIT: JUST REALISED MY CODE WAS AWFUL, SO UPDATED:
Dim paymentTable As New DataTable("paymentTable")
For j = 0 To UBound(paymentTypes)
[code]....
I can usually find the answers to most of my questions via the Google Gods, but not this time.I have a form that has a TabPageControl and on that page a collection of labels and text boxes via a usercontrol.
On the form I have a button that allows the user to create a new tabpage, when the code adds a new page, it automatically adds the UserControl collection. I can't get my head around how to access the objects on the newly created tabpage.
What I need to be able todo is take the index of the tabpage that has focus and translate that against the UerContol name, but I havn't a clue how to do it!
[Code]...
i have created my own custom propertythe property is of type collection ,it displays a form which allow the user to add a list of images and strings,it stores the data in a collection ,my problem is , i have noticed that after adding items to the collection at design time , there is no code generated in the .Designer file of the form and there for when i close the for / save it and reload it , all the items that i added to my custom property are gone.my question , what did i miss here ? how do i make my custom property generate code at the .designer file for the items i have added to my property?
View 1 RepliesI want to open the url in new tab when clicking on the link button that is generated dynamically in grid view.
I am using VB.response.redirect(url as string) opens the url in same window. what should i write in on click event?
I have a user control which is essentially a main menu I can place it into my MasterPage hard-coded, but I don't want that, I want to be able to dynamically place it with the code behind of the MasterPage.
<controls:mainMenu ID='MainMenu1' runat='server' />
So what I am looking to do is something like
if **condition is true ** _ response.write('<controls:mainMenu ID='MainMenu1' runat='server' />')
Of course, I know that won't work, but how would I place the control based on a condition in code behind on the master page?
we have 3 classes:Class S, class A, class B / A and B inherits S.A has a property A1 and B has a property B1.we also have a collection of objects that has A and B objects.ex.
Dim c as Collection = new Collection
c.add(new A)
c.add(new B)
Now we want to make a general object that will read from the collection.
ex .
Dim obj as S
how can we cast obj in order to see properties A1 or B1 according to the class;
suppose I have a collection of objects of different classes (like controls in a form), and all of their classes have a MyMethod extension method. How do I have the appropriatemethod be called for each object, depending on its type?or example,
For Each ctrl In Me.Controls
'call ctrl real type's MyMethod
Next
[code]....
i've researched and written a generic class (all my objects are the same structure) and i'm was just working on the collection using a hash table but i've just read a comment within (url...) in this forum...that we shouldn't use hashtables at all with vs2008.i actually need and object collection that contains other object collections within them.the application i'm trying to write is relatively simple (but i'm new to vb.net)it keeps track of the time for weight lifting training/workouts.a workout consists of 'say' a bench press, military press, curls, dead lift, etc within the "bench" you have 1,2, or 3 sets (how many times you do "the bench", within a set you have 1,2,3 or 4 lifters, each lifter does reps.then it starts over with military press..i guess i could base it on a treeview type structure (with parent child type relationships) but i usually think in terms of collections it appears that a collectionbase has no key and i'd have to keep track of them on my own...
View 2 Replies