I created a subroutine to copy and paste a file using the binaryreader and binarywriter. It works fine from what I can tell. The file sizes match up any how but I was wondering if anybody had an idea on a better way to get the amount of bytes that should be copied in one set.
binwriter.Write(binread.ReadBytes(100000)) I want to make the readbytes as large as possible without crashing the users computer.
Can you delete stuff inside of a file after you have committed it to the binary file? I noticed that you can still read the stuff inside of a binary file.Also is there a step by step tutorial for the binaryreader and writer
View 3 RepliesI have function on client side that get file, make a byte array from it and send that array to the web service on server!This is the function on client side:
[Code]...
I have tried to create a method for writing information from an instance of a class to a binary file. The code works fine, the only problem is finding the end of the file. After it has read the last value that should be read, the basestream.Length is still higher than basestream.Position (by a random number)In my case I have created a class with two fields (name and birthday), one that is string and a date field. With my code, this should write 5 lines to the file (classname + nameofNameField + StringValue + nameOfBirthdayField + DateValue) When reading there's still more information in the file, when I have read the DateValue. Why? How do I find if it has read the end of the file?
Imports System.Reflection
Imports System.IO
Public Module BugHunter
[code]....
This code generates a bare basic file reader that reads a file and displays its contents in hex format The bytes of the file are displayed 32 bytes at a time in hex and string format.I've found it quite useful
View 1 RepliesI need to store/retrieve a bit from a data table of 3.268.760 bits long.
Using w As New BinaryWriter(File.Open("test.bin", FileMode.Create))
for x = 1 to 3268760
For i = 1 To 3268760[code]....
the w.write(?) stores a boolean value meaning 0/1 for false/true values, but Vb.net seems to use an whole byte to store this data which is too expensive for my table (3.268.760^2).Is there a pratical way to store/retrive single bits from a file using vb.net? (meaning as little as possible conversion to other types).
I am using BinaryWriter class to write a binary file to disk. When I invoke the Write method, passing an unsigned short value, it writes it in little-endian format. For example:
bw.Write(0xA000);
writes the value in the binary file as 0x00 0xA0. Is there a way to make BInaryWriter use Big Endian? If not, is it possible to create a new class, inheriting BinaryWriter and overload the Write function to make it write big endian?
Private Function GetImageSize(ByVal FileName As String) As Size
Dim ImageSize As Size
Using BR As New BinaryReader(New FileStream(FileName, FileMode.Open))
Do
[code]....
I want to display photos of people when the mouse passes over their name. I wanted to be able to size the picture box to be proportional to the various photographs and let the Stretch property handle the rest.I used the code above offered by John Wein to a question from 2009 to read the dimension of the picture It worked fine until I pass over the same person twice. Then I get an error that the file is in use by another process.I tried adding:
"BR.Close"
With and without
"BR.Dispose"
But the file is still locked-out on the second pass. I tried setting "PictureBox.Image = Nothing" when the mouse leaves the square, still the file is seen as in use and locked.
Im trying to create a bittorrent client, now I'm in the bencode decoder reading the .torrent file with the use of a BinaryReader(datos variable), when I'm reading the value of "pieces" of the "info" dictionary, but in some part of the value of "pieces" i can't read the bytes of them, therefore all of the rest bytes of the "pieces" don't be readed.
this is the code I'm using to read the value of "pieces"
Private Function decodeString() As BEncodeString
Dim numeric As Char = Convert.ToChar(datos.ReadByte())
Dim value As BEncodeString
[Code].....
I am using BinaryReader class to read binary file.But I am facing problem while reading number of bytes from it.I have written code to read only 2 bytes from it,it works well on my machine and read only 2 bytes,but when I deployed that code on server machine it read 4 bytes from file.Whats wrong in the code?Is it due to processor i.e.. 32 bit processor/64 bit processor.
View 2 RepliesI need to write a file that will be built mostly from simple text and divided by "|" but in one of its fields i must to use BinaryWriter to store the string as binary and not a simple text, is there a way to do it?
View 10 RepliesHow do I get the current write-position using the BinaryWriter. I need to store the position in order to read from that position afterwards. (I know it would give the position where the next write would start, that will be taken care of).
View 2 RepliesOkay, this actually relates to some work I'm doing that I already have something in place. So if a change is necessary down the road, I'm in no hurry... But I did a dangerous thing and began reading. As I began reading about ways to stream file data, I became curious as to when it is a good idea to one method or the other.
[Code]...
I have a small copy/paste type of program. You put text in the boxes, click copy and it copies it to the clipboard. I have a text file attached to format the text when it is copied. what I want to accomplish is...If I don't fill in every single textbox with text, I don't want that particular field to show when I paste it. Example, I have the layout like below on the text document.
textbox1.
textbox2.
textbox3.
No matter what, when I click copy, the text document is going to copy textbox1,2,and 3. If I only put text in textbox 1 and 3, I don't want it to copy textbox2 if its empty.
I have a text box and want to know if the data enter into is via pressing numeric keys or via a CTRL+V or via mouse right click.
Do not want to use windows message to process for paste/right click paste event.
I want to read 15 bytes of data starting at byte 40 and ending at byte 55. I then want the value of the 15 bytes of data to print to textbox5. I know this should be a simple task but I'm having a lot of trouble figuring this out.
View 10 RepliesWhy does this programmer use a binary reader to read bytes, why not the client.getstream.read or streamreader?
Case RequestTags.Connect
'sent from server to client informing client that a successful
'connection negotiation has been made and the connection now exists.
[code]....
Say I have the data below:
Dim dateToday As Integer = 16
Dim dayToday As String = "Thursday"
Dim monthToday As String = "April"
[code].....
In the key down event for a text or rich text box:If (e.Control) And (e.KeyCode = Keys.V) Then e.SuppressKeyPress = TrueTo prevent pasting for all text boxes on your form, set form KeyPreview to true and add the above code to form key down event.
View 4 RepliesI have a webbrowser control which I have created a contextmenu for. I have added a paste button and do docbrowser.body.inner.body = clipboard.gettext. The problem with this is when I copy text from a word document and paste it I loose all the formatting. If I remove my context menu and use the default and paste I keep my formatting.
View 2 RepliesI want to create a binary file in vb6 which contains variable length strings and which will be read in VB.NET by using BinaryReader. Since BinaryReader requires the variable length strings should be length-prefixed, I have to write them accordingly.
I tried the following:
type x
y as string
end type
[Code]....
Is it possible to make sort of an installer where you have your files you wan to install in the Project resurces file and then copy and paste them into a directory?
View 16 RepliesI need to parse a binary stream in .NET to convert a 16 byte unsigned integer. I would like to use the BinaryReader.ReadUIntXX() functions but there isn't a BinaryReader.ReadUInt128() function available. I assume I will have to roll my own function using the ReadByte function and build an array but I don't know if this is the most efficient method?
View 3 RepliesHow Can I Copy & Paste Lets Say Test.txt Or Test.exe From My.Resources To "C:\Temp\" ???
View 9 RepliesWhen I prototype I tend to keep all my classes in one file (bad practice I know, but yeah it a prototype). Then comes the point the where the files is too hard to navigate. So I breakout the classes into separate files inside the project, the folder structure reflecting the namespaces.To achieve the is;- 1. Add new Folder 2. Add new Class 3. Name class 4. Cut and paste corresponding section into new class file.For me, Steps 2 through 4 are prime fodder for a new Menu entries.
View 3 RepliesI get a problem with my program. My program should do :
-Explore folders from a main folder (LOGS)
-See if there are csv files
-Copy the data from CSV (all informations are on the first column)
-Paste it in one xls file (with a sheet for every csv)[code]...
how to open an existing XL file and copy a column of data and then paste it to a column of another existing XL file ?
View 1 RepliesHow I can Paste from Clipboard a file to my path? I work in VB .NET. I got filename from clipboard but don't know how to extract file from cliboard and save it to my folder.
Dim data As IDataObject = Clipboard.GetDataObject()
If data.GetDataPresent(DataFormats.FileDrop) Then
Dim files As String() = data.GetData(DataFormats.FileDrop)
End If
I have a program where by I want to copy a temporary (in coming file from an email attachement) and I want to paste this onto my form (listview control perhaps??)
How can I paste this on there so when I click a button I end up saving this file into a selected loction.
I've google search this with no luck.
how i could get a file off the internet a .txt file then it copies all that info in there then pastes it into a txtbox on the form.
View 39 Replies