Populate A A Listview Control With Items And Subitems That A User Enters Into A Group Of Textboxes On A Form?
Feb 13, 2009
I am trying to populate a a listview control with items and subitems that a user enters into a group of textboxes on a form. It looks as if some of the code to do this has changed since VB6 and I am confused again. Here is the current code I am using without success:
lvSurgProcedure is the name of my listview control
Private Sub btnAddSurgeProcedure(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAddSurgProcedure.Click
Dim lvItem As New ListViewItem
I have a multiline textbox in which i add values to.A button is pressed to put these values in a listview in the first column.I then have 5 or 6 other comboboxes and textboxes that will send information as subitems to the listview, only if the original item in the listview has a checked box. The code i currently have is just adding the subitems to however many checkboxes are checked.I am trying to get the subitems to add to all of the items that have checked boxes rather than creating there own rown underneath the checked boxes.[code]
I want to set a color on items and subitems being displayed within the listview control in a detailed view.Using the forecolor property setting would change the color of all the contents in the listview control. All I want is to display different colors on each column of the listview control. If I have four colums on the listview, it should display the contents on each column in a different color. I tried to do it on my own but it was unsuccessful. I'm looking for the exact code to set the color successfully. Currently, the code below is what I have to display the data on the listview. What line of code should I add on the code below to set different colors on items and subitems of the listview?
I have a Form with listview of customer name. e.g. AAA, BBB, CCC, DDD, EEE. etc And 3 textboxes.
I want to be able to populate the textboxes when the user selects a customer. For example: If User selects AAA, textbox1.text = AAA, then if User selects CCC, textbox2.text = CCC etc.
I tired: (in a button on click event) TextBox1.Text = Listview1.SelectedItems(0).Text TextBox2.Text = Listview1.SelectedItems(1).Text TextBox3.Text = Listview1.SelectedItems(2).Text
But this only works if the user selects 'all' 3 customers at once. I want to allow the User to populate each textboxes depending on how many they select eg. 'Upto' 3 customers .
I've been using KeyPress to help limit what the user enters into certain textboxes. e.g. here's my code for a Phone number. It only allows for numbers and dashes: [code]It's all working fine; however, the thing I hate about using it is that when ever have to do debugging of the screen, for each keypress into this textbox, it goes into debug.I'm wondering if it's possible to do something similar when the user clicks the save button. Has anyone done any type of validation like this?
Ok so i made a program where the user enters 3 inputs in a 3 textboxes (First Name, Last Name, Bday) and when the person presses enter a check list is made under the checklistbox with the Lastname. So can any1 tell me if i click on that checklist then everything i entered shows up in a label.
I have run into an issue and need help solving it. I know how to go about adding items to My.Settings and I have already created the Specialized String Collection to My.Settings called List but I am having some trouble getting the items and the subitems to save to the list.
i have an listview containing an normal listviewitem plus one subitem What i want to do is save the info in the listview in a textfile and load when i start my program. So that all the info will be saved, but how do i do this?
i'd like to find/filter listvew item as i type in a textbox, the listviewitemfind doesn't seem to work whe i try it.is this possible without looping through all columns and then all rows?
I've have a problem, this sub works just fine adding items into a listview.. Some reason they forecolor of items / subitems wont change in view.details mode, it seems to work in other views but not details, and details is what i need as you can see I'm even using Item.UseItemStyleForSubItems = False
I was developing my own project in the university so what i am stack is to have save button which firstly validates what the user enters the form. for instance if the user skips the text fields, i wanted to restrict the user to fill all the form and when he completes, the save must be accomplished.
Here's the code i was trying to put but i was having problem saying the windows.forms.etc is unable to convert the save as Boolean and something like that.
Dim success As Boolean Private Sub Save_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Save.Click
I have a login form that I made. The user enters a username in textbox1 and then enters a password in textbox2. The user then hits the submit button (button2) and from there it works beautifully. The problem is, I would also like the user to be able to hit the "enter" key after they fill out the password textbox (textbox2) and have it be like they pressed the submit button. When the user hits enter right now, the form hides.
I have the code below and when I try to populate the listview it populates all of the listview items but only the first subitem. No clue what I've got wrong.[code...]
Working on a project that contains a listView (populated from a database already) and several textboxes. What I am trying to do, and cannot figure out, is to program this so that when a user makes a selection in the listview, it hits a specific database, and based on certain values within that databse, the textboxes are populated with things such as name and address, etc..
These are all databound to a Access table All of the binding is done with the data wizard so there are the standard bindingsource, table adapters, binding navigators, etc.On the binding navigator bar there are the standard "+" and "X" buttons to add and delete records. There is also the SAVE button.In my application, I want the user to press the "+" button to add a new record. When that happens, I want a few fields on the form to be prepopulated. Once the fields are prepopulated, then the user can continue making changes as needed before pressing the SAVE button. Now you might be quick to suggest the following - in the BindingNavigatorAddNewItem_Click event, add some line like this:
I'm trying to drag an item between two Groups in the same ListView called 'listTasks'.
Private Sub listTasks_ItemDrag(ByVal sender As Object, ByVal e As ItemDragEventArgs) Handles listTasks.ItemDrag listTasks.DoDragDrop(listTasks.SelectedItems, DragDropEffects.Move) End Sub Private Sub listTasks_DragEnter(ByVal sender As Object, ByVal e As DragEventArgs) Handles listTasks.DragEnter
[Code]...
With listTasks.PointToClient(New Point(e.X, e.Y)) you could use listTasks.GetItemAt(p.X, p.Y) to get the ListView item you're over. Is there something like this for Groups? Or perhaps a better way to determine what group is the target of a drag-drop?
I want to populate a listview with items from datagrid view. I've been searching for solutions but it seems that all the scenarios I found were about populating listview with items from tables in database, not from another listview or datagrid view.
I'm trying this code: For count As Integer = 0 To (DataGridView1.Rows.Count() - 1) Dim row As DataRow = DataGridView1.Rows(count) Dim item As ListViewItem = New ListViewItem(row(fieldfirstcol).ToString()) item.SubItems.Add(row(fieldsecondcol.ToString())) ListView1.Items.Add(item) But it doesn't work; it says DataGridViewRow cannot be converted to DataRow.
i have a list view with items that a user adds and what i want to do is run a query from my database that checks if the items in the list view are active and if they are move them to a group on the list
EG Test = active NoTest = Inactive Group Online
[Code].....
i have 2 groups Online and offline i want to check if the user is online and if so move them to the online group
i have the query and that to check it i just dont know how to move the users to the correct group
How can I save ALL of the items in a listview, items that were added by the user? I tried application Settings and tried creating a settings file but there is not a settings option for listview items.
I have a webForm app that registers a user in the database based on the information provided with a web service, auto-generates a random password and username, and e-mails the user a link to take an application based on the marketing company selected. How do I get only the currently logged in user's groups to show up under the MarketingCo_DropDownList. Each user allowed access to the system will have membership in at least one of the marketing groups as defined by the web.config. For example, a user that is currently logged in and belongs to the BIG group under location "algACOMP_user_BIG", will only be able to see BIG in the Marketing Company drop down list. A user that is currently logged in and belongs to the NIS group located under "algACOMP_user_NIS" will only be able to see NIS in the Marketing Company drop down list.
Here's my best guess (located under Private Sub GetMarketingCompanies() method in default.aspx.vb): If InStr(WindowsIdentity.GetCurrent().Groups = "AMG", item.MarketingCompanyShort = "AMG", CompareMethod.Text) Then marketingCo.Items.Add(String.Format("{0} | {1}", item.MarketingCompanyShort, item.MarketingCompanyName)) For Each item In ac1 [Code] .....
I have a listview with checkboxes on the left side and 2 columns of data. What I want to do is populate a listbox when the user checks a row in the listview. I've tried code in the Item_Check event. It does not pick up the item checked. It's as though it's behind. For example if my listview has a list of country codes and I check US, the code returns nothing but if I check another item, it picks up US. Same thing happens in the SelectedIndexChanged event. If I use a button, all works as expected.
I am trying to populate a row into a listview control and only the first items shows up (the ProductID). the product name, cost, and quantity don't show up.
I guess the control's properties must be set for this. I went and added 4 columns appropriately named, but those column headings don't appear either.
My
'* Add new row to the Order details grid if the currently selected product '* in the products grid is not already in the Order Details list view If Not bItemFound Then
I've got 1 form that has the user enter 7 fields of data.When they click my "Save" button those values are stored in a .DAT file.On that first form there is a button that brings up a second form with a listview control.I have all the headers set up but can't figure out how to populate the listview control with the contents of the .DAT file.A friend of mine told me I may need a Do while loop but this is my first time doing this and I am so lost. I don't even know where that loop would go and whether or not I need extra variable for it.