How can I save ALL of the items in a listview, items that were added by the user? I tried application Settings and tried creating a settings file but there is not a settings option for listview items.
View 8 Replieshow can i highlight my item after i added it to a listview that contains other items.
View 6 RepliesI have a listbox and would like to save the items added/deleted when the form closes.
View 4 RepliesWhat is the best way to save listview items?
View 3 RepliesI have a Listview with 5 columns. It display data taken from textbox. I want to save all these data to a database. I am using VB 2010 Express with Access database. I have tried the various codes in this forum but seem not be able to work it out. What code should i use? Also i have found many suggesting that a datagridview is a better option, how would i update the DGV with data from the textbox control, as this POS application and calculations are done for eventual printing of a receipt and saving the data to the db.
View 1 Repliesi have an listview containing an normal listviewitem plus one subitem What i want to do is save the info in the listview in a textfile and load when i start my program. So that all the info will be saved, but how do i do this?
View 3 Repliesi have a listview box full of items, image below:
when i click a button i would like a msgbox to pop up displaying how many are alive.
How would i do this ?
Also how would i remove all items that status is "Dead"
How can I save all the data stored into a ListView? (All the text stored in a row)
View 12 Repliesi made a media player program and i am having many problems! the main issue is that i have a listview that displays music playlist, how can i get it to navigate to the next item after the clicked one is over that way users don't have to click on the next one to continue their playlist?
View 14 RepliesIm trying to print out all the items/sub items of a listview into one string.
here is the code i have:
For Each lvwItem In ListView1.Items
' Print the subitems of this particular ListViewItem
For Each lvwSubItem In lvwItem.SubItems
[Code]....
How do i just print out the value (MyItem1) without the "ListViewSubItem: {}" part? I know i can use a string function to remove this, but id rather not
I have added a textbox and a combobox into the form. There are 2 buttons as Add and Remove. Everything works fine here but the problem is after addig/removing (using add/remove button) new items into the combobox, when I close it, the new items added/removed are gone. I need to save the new items added to the combobox during close. I can understand I have to create a Application Setting which will save the new items added to combobox upon closing. But I don't know which code I need to use? Below are the currently used code of this project.
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
' This is to add new items to combobox
ComboBox1.Items.Add(TextBox1.Text)
'MsgBox("" & TextBox1.Text & " Successfully Added to Combobox")
[Code] .....
I am trying to populate a a listview control with items and subitems that a user enters into a group of textboxes on a form. It looks as if some of the code to do this has changed since VB6 and I am confused again. Here is the current code I am using without success:
lvSurgProcedure is the name of my listview control
Private Sub btnAddSurgeProcedure(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAddSurgProcedure.Click
Dim lvItem As New ListViewItem
[code].....
how to use #ZipLib. I've tried there forum and I've looked on this and other sites . I'm still new to VB and trying to teach myself. Using items like a text box are easy but i don't know much about how to use added items such as #ZipLib. Examples of compress and decompress would be wonderful but if you show me what can that would be great too.
View 2 Replieshaving trouble only adding the checkboxstatus's that are checked to the gridview.
[code]...
I'm using VB.NET 2010 When I try to add the items from a listbox to a textbox, I get a strange combination at the beginning of the textbox, but if I read further, the actual combination that I want is at the end.
So let's say I have 3 integers in my Listbox like: 01 02 03 And I want these three items to be in the Textbox like this: 01 - 02 - 03
[Code]...
on form1 , i have a combobox and a label. on form 2 , i have a checkbox , a textbox , and a label . in the textbox i input the name to be added to form 1 by combobox checked, and the label has a folder directory.
i can add the new item to the combobox on form 1, from the checked box on form 2. what i can't seem to figure out, is how to get the form1.combobox newly added item to show the folder directory label from form 2 on the form1's directory label when i click on the combobox item..
I have a ComboBox control with some items added to the items collection in design mode. What I want is when an item is picked from the ComboBox a different value is actually used in the code, instead of what is displayed. I am aware of the DisplayMember & ValueMember properties, but I'm not sure if that is what I need to use. All the examples I found were for bound data.
View 3 RepliesI've created a custom control that I insert into my window with the following code
Code:
<controls:ListExpander Text="Class Diagrams"></controls:ListExpander>
The control in question contains several subcontrols, among others, a list. How can create the setup, so I can specify items that should be added to the list?
Code:
<controls:ListExpander Text="Class Diagrams">
<SomeItem>data<SomeItem>
<SomeItem>data<SomeItem>
<SomeItem>data<SomeItem>
<SomeItem>data<SomeItem>
</controls:ListExpander>
In which case the SomeItem objects should be added to the list in the ListExpander:
Code:
<ListBox Name="lstItems" Background="LightGray">
<ListBox.Items>
// Items should go here
</ListBox.Items>
</ListBox>
I'm quite new to WPF, but I suppose it's something along the lines of creating a dependency collection on ListExpander that takes object of the type SomeItem? I simply want to be able to give the control a few arguments which it can translate into items in the listbox contained within the the control.
I do not have any code to show, but using asp.net, vb.net, and SQL with stored procedures.If on a page I have an item that is added to the database and therefore that information is "saved", is there a way to have an ("exit without saving") button on the page that does away with those changes?Using infragisitcs ultrawebgrid, you add an item to one table. You can add an item to another table on that page. i assume adding these items to the table automatically saves in the database. There is also a text box but without clicking save I do not believe that those items are actually added to the database. Update panel is used, I don't know if that matters.
If after someone adds to the table but then decides.. oh wait.. I don't want to do this just yet, is there a "one-click" way to act as if I never visited that page to add info? I'm assuming it would be deleting the entries but this would have to be limited to deleting ONLY those items added while making... we don't want people adding info, then going back and deleting once the "save" button has been pushed.
I don't even know where to start with adding a command to a newly added item in the context menu. So much work to do and so many choices to choose from...
View 4 RepliesI am using VB.NET in VS10. After I add items to a list box I'd like it to scroll down so that the most recent items are visible. I tried this with no luck:
StatusListBox.SelectedItem = StatusListBox.Items.Count - 1
How to make the box always display the most recently added items?
How can i change the order that the items are added into the listbox? This is the original order:
[Code]....
And so on... What i want to do, in other words, is for the newest added item to be at the top of the list.
I'm writing code some that is supposed to be creating a list of objects pulled from a data base. The list returned has every item containing the value of the last one added. When I debug the code is VS2008 I can see each time that the list.add is performed every other item in the list being changed to the one just added. Here is the code I running. The line containing ListAKAs.Add(itemAKA) is the one where the entire list of objects is changed to be identical to the one just added.[code]....
View 1 RepliesThe dropdown box displays all the items previously added to that column.
I want the user to be able to enter a new value OR just pick a previous value from the dropdown list. (This is when inserting a new row)
Problem:
Whenever I enter a value, it jumps around in my table like its on acid or something. Whenever I select a value from the list, it takes me to the line in which the value was originally entered.
How do I get it to do what I want.
In the windows form designer, I added a StatusStrip control, made some changes to adding items and changed the names of the items to names I would recognize, for instance I changed "ToolStripStatusLabel3" to "lblMode". All was fine until I inadvertenly deleted the StatusStrip. Now when I add it back to the form and try to change the name I get an error saying that the name "lblMode" is already in use. And sure enough it is listed in the items of the properties window, but not dislayed anywhere.
I am not sure how to resolve this. I know there is a window, I think its called "Project Designer" or something similar that is code where controls get added but I CANNOT find this window to view the code.
I have several custom classes in a VB.NET (VS2008) project which are related to each other through generic list collections. The lower tier classes refer directly to some of the parent classes (to make it easier to refer backwards up the chain). My question is, is it possible to add the reference to the parent class when the item is added to a collection, when that collection is a property?
Below is some sampling of code to illustrate.
Public Class FlexServer
Private m_FlexLicenses As List(Of FlexLicense)
Private m_Modules As List(Of FlexModule)
Public Property FlexLicenses() As List(Of FlexLicense)
[code] .....
In the code above I have the FlexServer class which refers has two lists as properties, one for FlexLicense and one for Modules. The FlexLicense class has a property to refer back to the FlexServer class that "owns" it. In order to update this property in code, I have to add the FlexLicense to the FlexServer.FlexLicenses list AND set the FlexLicense.FlexServer property. What I am looking for is, is there a way (in the property definition or wherever) to both add the item to the list and alter it at the same time?
im trying to make the listview sort the listview items by column (whichever column was clicked, sort the list based on that column)
in vb6 it was done by:
Private Sub ListView1_ColumnClick(ByVal ColumnHeader As MSComctlLib.ColumnHeader)
Static olditem&
With ListView1
[Code].....
I added a few items in the combobox dropdown list at the form load event. [code] At the runtime I dont want to allow the user to write something in the combobox as a text.The user can only select an item from the dropdown list of the combobox.
View 13 RepliesI have researched the net, youtube, and the msdn DB, and still can not find the working answer I am looking for. I would like someone to show me how you would save the contents of "Listbox1" to a .txt file using the "Save As" Option. I know how to hardcode a savepoint in, but since there will be multiple users I would like the option to be up to the end-user.
View 4 RepliesI have the code below and when I try to populate the listview it populates all of the listview items but only the first subitem. No clue what I've got wrong.[code...]
View 2 Replies