Print File Location Into Textbox
Aug 22, 2009Im trying to make it so when my file is extracted or moved it will always know where the location of its self. It will then print this location to textbox1 how do i do this?
View 6 RepliesIm trying to make it so when my file is extracted or moved it will always know where the location of its self. It will then print this location to textbox1 how do i do this?
View 6 RepliesI need to be able to allow the user to type in a file name and folder location into a textbox then when you run the program (that the client makes) it will create a program in that location. The problem is that when it runs it says that access to the folder is denied. I Think it is because it is that there is a file with the same name as the folder. The input as of now i have it as "C:\Another Folder\Filename.exe" but when I do this it creates two folders (Another folder and Filename.exe)... I thought that you could do it using substrings and last index of but either i wasn't doing it correctly or it doesn't work. I want to be able to do this from one textbox.
dim rootname as string = textbox1
dim exename as string
dim location as string
dim thepath as string
[code]....
how can I printscreen a specific location or area in my screen that can be save in gif or jpeg files
View 8 Repliesin my application i have to print some data on alrady printed forms...for example: i have print on a BANK CHEQUE.
Now my problem is that these forms are printed differently and different bank have different check but all have the same data..and to meet this requirement printing need to be ajusted for eg i might need one colom two place down or left or right.. so i need a printing tool in which i can edit the location of printing meterial i mean take them few places left or right and adjust them as my requirement.i have used crystal reports and ms reports at very basic level but what i have found is that i can not edit design move drag etc from the application..
Is it Possible for me to read text from textbox control and write it to .txt file at specific location.
for an instance.... say below with quote is my Text in .txt file:
"THE QUICK BROWN FOX JUMP OVER THE LAZY DOG"
and with programming code I want to change some text in the same sentance become....(see below)
"THE QUICK GREY FOX JUMP OVER THE LAZY CAT"
so you can see the word BROWN change to GREY and word DOG change to CAT
I'm using vb2008 and Internet Explorer 8 in Windiows 7 Is that possible to print text from TextBox to the TextBox on the Internet Explorer like (Port box or address box in connection part )?
View 1 Replieshow to print to text file of query print job using vb.net?
View 2 Repliessimple question but I don't know much about the savefiledialog component. I know I can bring up the dialog with savefiledialog.showdialog but what I want to do is allow the user to browse to a location to save the file, press okay then that destination be placed in a textbox on the form?
View 5 RepliesI'm developing a program at the moment and I'm trying to add the capability to add a texbox everytime you click a button. This is simple other than I'm trying to be efficiant as possible, so I made a sub that creates the textbox and the button calls the sub. Here is where it gets tricky I want the new textbox to move just below the previouse textbox, I'm not sure how to do this since Im only really createing one textbox over and over and having a variable name it by one. This souds confusing I know, but check out my code and it will make since. Really all I'm trying to do is change the location of a unknown textbox say since I create a textbox name textbox0 then when I hit the button again my varibale goes up by 1 which makes the new textbox, textbox1. how to I tell VB to change textbox1's location.[code]...
View 2 RepliesI'm developing a program at the moment and I'm trying to add the capability to add a texbox everytime you click a button. This is simple other than I'm trying to be efficiant as possible, so I made a sub that creates the textbox and the button calls the sub. Here is where it gets tricky I want the new textbox to move just below the previouse textbox, I'm not sure how to do this since Im only really createing one textbox over and over and having a variable name it by one. This souds confusing I know, but check out my code and it will make since. Really all I'm trying to do is change the location of a unknown textbox say since I create a textbox name textbox0 then when I hit the button again my varibale goes up by 1 which makes the new textbox, textbox1. how to I tell VB to change textbox1's location....
Code:
Public
Class
frmExpenses
'I made everything public because I'm runnings a test timer which are sending realtime data to some labels
Public i
As
Integer
[code]....
How do you find the location of the little blinking cursor where the user can type, column and row? I couldn't find this anywhere.
View 1 RepliesI have a form called main with 10 number of text boxes.my second small form called popup & I want to appear right corner of selected text box. Ex - when I click 1st text box, I want to appear the popup next to the firs text box, then I click 2nd text box I want to move popup to 2nd text box.
so I used
New Point(10 + Me.Location.X + SerchTextBox.Width + SerchTextBox.Location.X, 20 + Me.Location.Y + SerchTextBox.Height + SerchTextBox.Location.Y)
the problem is I have large no of textboxes & difficult to changed each textbox name each place.
If I can get selected textbox coordinates X & Y its easy & compact. How can I find selected text box location.
I have 100 textbox exist on a form (10,10). I had used the following property of each textbox(.Text, .Tag, Tooltip, AccessibleName). I need to drag from any textbox to another textbox and they replace each other by the 4 content mentioned above. Instead, I managed to change the location of the source and target textbox by drag and drop which seems to be easier. I have 100 textboxes, I will not do a programming for each one putting a code at design time. there should be a way to do it by programming
The code I found to replace location between 2 textboxes is this
Private Sub tbfromMouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles tbFrom.MouseDown
tbFrom.DoDragDrop(tbFrom, DragDropEffects.Move)
End Sub
[Code] .....
I am using this line of code to place a special character in a textbox at the cursor location:
Me.RichTextBoxPrintCtrl0.Text = Me.RichTextBox.Text.Insert(cursorloc, "ῳ")
It works good, but after it has been done, if you try to undo the action by pressing control Z, for example, it is not undoable. Is there a way to make the action undoable?
I have a MDI form with different controls, two of they are multiline textboxes, and by default the form opens in normal state. Once opened, if I maximize the form all the controls location and size are as I wants (using the anchor property). And now comes the estrange error, if I have opened other form maximized, and then I open the first mentioned form, the multiline textboxes location is wrong, they are upper than the correct location.
Note 1: If I change multiline to false, all works fine.Note 2: The textboxes location is in the bottom of the form and the anchor is left, bottom and right.I try different possibilities and search information in the web without results.
I have one richtextbox on my form, and how to print text from textbox, I want to first select printer and numbers of copies.
View 1 RepliesI need to print the contents of a textbox in vb.net 2008.[code]
View 3 Repliesi have another problem with my program. I need to print a textbox that contain some data (of course). The textbox is formatted like this:
HEADER
Data1 Data2 Data3
Data4 Data5 Data6
Etc...
FOOTER
I managed to print the file using the DocumentPrint object. But there's a problem :) i need this data to be printed in a tabular form (just like an excel sheet). Because the lenght of Data1, Data2, etc.. strings is different i can't just use space characters to divide "columns". I have no idea where to start..
I have TextBox including text Example "Hello". I want to print another text like "Vb.net" at the end of hello to became like this : "Hello Vb.net".
View 6 RepliesI want to print the content of a textbox. Something what Notepad does. Or, to export the text from the textbox to a Word document.
View 5 RepliesI'm making a random sentence generator that takes subjects, predicates, etc. from user input, stores them, and then randomly chooses one value from each category and prints it in a textbox. Or at least, that's how it's supposed to work. But I just can't seem to get the text to print in the textbox. Everything compiles fine, but when I click generate, Windows gives an error.
Since I have barely any time, for it is a project at an enrichment course that ends in 2 days, I've been trying everything I could without taking too long.[code]...
i have table with 2 field (ID and BLNumber) and data in table is:
ID BLNumber
1 1231001
2 1231002
3 1232003
4 1232004
5 1233005
in form i have 1 Print button (Button4) and 1 textbox (Filter.text), etc.now i want to print the all data like Filter.text this is my code
Private Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click
If TableNamaDataGridView.RowCount < 1 Then Exit Sub
Dim frm As New PrintForm
Dim objRptDo As New CrystalReport2
[code]....
if i write "1231001" this program work ok(print only on record):
1 1231001
but i want to print all data with 5 first digit "12310", and will print:
1 1231001
2 1231002
I want to print the cell from DataGridView of column 2 in row2 to TextBox?
View 1 RepliesPrint string into a textbox in visual basic 6.0
View 2 RepliesImports
Public
ev.Graphics.DrawString(TextBox1.Text,
New
[Code].....
I have been working on some code that prints a textbox that lists contact information. When I try to print it, it doesn't print out the tabs that I used to format the text. Here is my code:
Private Sub PrintPage(ByVal sender As Object, ByVal ev As PrintPageEventArgs) _
Handles prndoc.PrintPage
Dim fnt As Font = resultTextBox.Font
[code].....
on my program i have an activation in it and in order to activate the program you need to enter a code that is stored in the settings. so i was looking through my computer and i found the programs config file. and so I opened it and i found all of the codes for the activation. I need to find out how to make the file so the user doesn't have access to it and then how to move it to a more hidden place in the C: drive.
View 3 Repliesi just want to ask how can i save the file location or directory of a file in mysql without deleting its slashes...i tried to save it directly.. for example: the original directory is c:folderimg.jpg and when i checked it on mysql it is save as c:folderimg.jpg
View 5 RepliesI'm looking for a way to specify the location for the User.config file that is used for storing the My.Settings object. It appears that this is not possible. The problem for me is, I don't want to be responsible for creating several different files on the users computer that really have no use and are difficult to find and clean once an update is released. For most users, this is not a serious problem, as many will probably never update the software, and most will probably only go through a couple of updates. On my system, there are config files for every build of the application, and the same to a lesser extent will be true for my beta testers.
I can understand that MS wants to make sure that no two applications will use the same location for storing application data, but a simple [UserData] [CompanyName][ApplicationName] for storing application data will probably suffice for 99.9999 percent of the legitimate applications in the world. Bogging a user's system down with erroneous files, no matter how small, is an unnecessary drain on system resources and a potential source of problems for the user. It's bad enough that most programs leave bits and pieces of themselves all over a user's system after De-installation - this to me seems only to exaggerate this problem.
Is the only way to get around this problem to write a whole new Settings Class? Is there a way to change the location of the UserConfig file to a more friendly (and more predictable) location that I am not finding for myself? It would seem that having at least the OPTION to specify a location for the User.Config file would be OBVIOUS and easy to implement, so why did they leave this out?
Using the following code to print the contents of my rich textbox
Private Sub PrintText(ByVal sender As Object, _
ByVal ev As PrintPageEventArgs)
tbUpperBody.Text = vbNewLine &
vbNewLine &
tbUpperBody.Text
[Code]...
Issue is that when the rich textbox contains text that is spread over multiple lines, it prints as one massive line, which obviously disappears off the edge of the page.
how can i get it to print with line breaks?