I use this code to read in a text file:
Quote:
Dim fileName As String = fileloc
Using reader As New System.IO.StreamReader(fileName)
While Not reader.ReadLine() Is Nothing
[code]....
THe problem is it reads in every other line.I assume its because its reading line one in the 'while' then the next line being stored during the loop....
I am looping through a text file and reading and then parsing each line.. then, inserting into a sql server. The problem is, I am getting every other line. Any thoughts? I read another post on here that is similar and it says that that person was calling the ReadLine twice... which makes sense. I just cannot spot where it is happening.
Private Sub btnUpdateRSR_Click(sender As System.Object, e As System.EventArgs) Handles btnUpdateRSR.Click
' Get RSR File
lblStatus.Text = "Getting RSR File"
Application.DoEvents()
[code]....
The end of the text document my application is reading is denoted by a character that I cant identify, copy or paste. I attached an image of it so you can see. I have no control over the formatting of the document so I can't change the character. During debugging it shows the same character as shown in the picture, but if I hit the little tack next to where the variable shows then it changes to "f". However, if I try to see if the variable equals "f" it returns false.
View 3 RepliesI am trying to read a specific line from a text file and for some reason when I set my variable loopCounter = 1 To 5 it jumps all the way down to the word "Marty" in my text file but if I just change loopCounter = 0 To 5 it jumps to where it should be which is the letter "M" right after "25". I'm trying to get it to read "25". as this is an assignment for a VB class I'm taking. My text file is at the bottom.
Do While readFile.Peek > -1
For loopCounter = 1 To 5
readFile.ReadLine()
[Code].....
This is my code:
Dim lngLines As String
Dim sr As New StreamReader(opdFileAudio.FileName)
While Not sr.EndOfStream
lngLines = sr.ReadLine
If lngLines.Contains("x") Then
lngLines = sr.ReadLine
[Code] .....
At the moment I want to read all lines in text file to a list box but I don't add strings x, and string y to listbox, and looping in.
lngLines.Contains("y")
I'm writing a program where there are text boxes and the user can enter info and append them to a text file as well as read from the text file and view the various entries in it. The problems I'm running into are that I have a button that opens an open file dialog box allowing you to select the file, and I want to get it to open the first entry of that file in the correct text boxes. the code so far looks like this
code:
I used to have this bit of code in there but there was a conflict with the .txt file being used more than once at the same time while it was in there.
code:
Im also having trouble writing to the file and I'm not sure why. I have an "Append" button that has this code in it
code:
and it comes up with the issue "object reference not set to to an object instance".
reading a text file into an array after a certain line in the text file, at the moment i am trying to do it using the method below: but i am having trouble thinking about how i can copy everyother line and also how i can count through the array the i = 0 and i = i + 1 are there while "i".
In a line what i would like to do:I need to copy everyother line for a known amount of lines that appears after the line " I FT I KT I " in a text file, but i do not know the position of this first line in the file.
Dim lines() As String = File.ReadAllLines(sessionsPath$ & "vmcg.afm")
For Each inline As String In lines
If inline.Contains(" I FT I KT I ") Then
[code]....
Does anyone know how to read individual lines off of a text file?
If the textfile looks like this:
Text1
Text2
Text3
Text4
You could make it so on timer1 it sends text1, then on the next tick text2, and so on?
I am working on an app now, and I need it to read text from a .txt file, but there's more. Here's what I want it to do:
Dim text as string
Find "file.txt"
text = line1 in txt file
Do something
text = line2 in txt file
Do something
text = line3 in txt file
Do something
And so on, until there are no more lines to read. I have searched, but all that I have found requires you to preprogram the amount of lines in the .txt file. I want to be able to add lines later without having to go into the code and add more.
I am new to ASP.Net and am trying to set up some content pages to work with my master page.I currently have the following text hardcoded into an asp:contentplaceholder and it works just fine. I want to read lines in from a text file to produce those headlines and retain the current formatting. I tried using the tag i need each line as a separate tag. Below is the code in the content place holder. Id like to have this done in the Page_Load or the pre Init.[code]
View 2 RepliesI want to put a function that reads a text file and put it in textbox1. I used this code to read the last line
Textbox1.text = Io.file.readalllines("C:c.txt").last
but I want it to read the third line.
Here's what i've got so far, i've written all of the data that i'm going to put into my config file, however i'm having trouble reading the specific string values that I need from that ini file. The parts of the ini lines I want to get are the values in between the I've tried using streamreader a couple things but i'm having trouble figuring that out. I need to parse each line of the ini file to get that value in between the single quotations, so that I can set the value for my richtextbox background and text color as well as a few other things that i've set up in my notepad including tab spacing and so on. lots of these different values need to be converted from a string value to integers, and boolean values as well. (4 of them, the rest of them don't have to be changed because they are already string values when my application reads them to determine it's application load settings.
EDIT: I just noticed in the preview that this is from the version of the app where I had streamwriter write "______ value=" & Something to a file. lol some of the (')s are still in this version, so please excuse that little part. I had them in, but took them out so that I could trim data to get a value easier, but I want to use (')s hopefully when all is said and done.For example, just to restate what I want - in the ini file it will read [setting name] value='VALUE'I want to be able to "get" the string value of "VALUE" within the ini file between the 2 single quotations '
Am I being dense here? StreamReader.ReadLine states that: A line is defined as a sequence of characters followed by a line feed (" "), a carriage return (" ") or a carriage return immediately followed by a line feed (" ")
[Code]...
I'm trying to create a program that stores a users stats for their character (for something like an RPG). I know how to write more than one line in a text file, but I want to learn how to read and write text on specific lines of my file. I know that you can just read each new line individually in order using a StreamReader, such as
username.text = readLine.ReadLine()
userage.text = readline.ReadLine()
[Code]....
This is good for just displaying the stats and changing them from a constant interface, but I'm afraid that eventually I'll need to read/write specific lines, like reading the fourth line which might specify magic level, or writing a new money amount.
I am in the process (slow process) if learning vb.net by trying to create a simple application that will read and write (save) chosen information to a text file. The application has text boxes (name, email address, etc) and I want to read information from certain lines in the text and place in the given text box.[code]When I start debugging mode it does not display the text until I click onto the text box and it's displaying the first line of text in the file. How do I skip the first line of text and have it display the second line (or the 6th, 24, or whatever line I need to be displayed)?Then I can start working on learning to use streamwriter
View 6 RepliesI got the following code to read an XML file: [Code] Obviously the count limits the amount of lines that it reads. But how do I get it to read all the lines in the file? Ive tried removing the And (count <20) but when I run the program nothing happens.
View 2 RepliesI'm getting some problems to read a text file with this configuration:
[Code]....
I want to put all 3 lines in a data grid view.
I have a form with a listbox. I'm adding items to the listbox through a file that I saved. When I open the file, I want each line/string in the file to go in as a separate item in the listbox. I've gotten it to work so far but only with 1 string. I need to loop the part where the file is being read to be able to add all the strings that are within the file to the listbox. How do I do this? So far, this is the code I have:
VB .net
Private Sub OpenToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OpenToolStripMenuItem.Click OpenFileDialog1.Filter =
[code].....
I am reading from a textfile. How can I skip a line if it's empty?
Or is it possible to delete at the beginning of ReadAllLines to remove this empy lines.
An empty line would be following:
text1
text2
"empty line"
text3
[Code]....
When I read a text file as the code below the first line returns as nothing. I checked the text file and it contains 3 lines before the read. After the read the first line is blank the following 2 lines have values.
[Code]...
When the form load I needed to create a text file into "C:\Program Files\User\User.text" But if the file exist it will read line1, line 2 and line3 of the text in different textboxes Then if I click save, it will write textbox 1 to line 1, textbox2 to line 2 and textbox3 to line 3.How do I do it?
View 14 RepliesI am trying to make a script to spit command lines to a bat file to compress a bunch of files singly and then delete the original ones. I am sure that is easy to most of you, but I living a ____ trying to do this. A have a file list like this one belo, which was created with a command -- Dir /b /s /a-D N: > filelist.txt
[Code]...
read lines in a file, split the lines and spit the result to another file
View 2 RepliesI need a bit of advice. I am working on my project with the listbox. I know how to create a source to get the strings from the text file using ReadLine method, but I have no idea how to split the strings in the text file by on the third commas and ignore the other strings while select with the matched strings on the listbox for each row.Here it is an example listbox Here it is an example items on the listbox
random item 1
random item 2
random item 3
random item 4
random item 5
And here it is an example text file.
example strings one, any strings 1, any random strings 1, other strings 1, final end of strings 1
example strings two, any strings 2, any random strings 2, other strings 2, final end of strings 2
example strings three, any strings 3, any random strings 3, other strings 3, final end of strings 3
example strings four, any strings 4, any random strings 4, other strings 4, final end of strings 4
example strings five, any strings 5, any random strings 5, other strings 5, final end of strings 5
The listbox is display the list of an example items, so if I select the "random item 1" item on the listbox, it read the strings through in the text file on the first line to get the strings on the third commas in the same line which it is (any random strings 1) to split it while ignore the other strings (other strings 1, final end of strings 1) that come fourth and fifth commas. So, if I select the "random item 2" item on the listbox, it read the the strings through in the text file on the second line to get the strings on the third commas in the same line which it is (any random strings 2) to split it while ignore the other strings (other strings 2, final end of strings 2) that come fourth and fifth commas and so on...That is what I am trying to achieve by select the each listbox item to get the correct strings for each line in the text file that come on the third commas while to ignore the other strings.
I am doing my IT PROJECT (CV MAKER) at the moment in college and i have little bit problem with reding lines in txtbox.
Dim lines() As String = TextBox4.Text.Split(Environment.NewLine)
Try
lines(0) = " -" & lines(0)
lines(1) = " -" & lines(1)
[code].....
and all of that in one variable?PS. this text box may have up to 15 -20 lines so i need some help for those numbers.
I have the following code;
Public Sub writetofile()
' 1: Append playername
Using writer As StreamWriter = New StreamWriter("highscores.txt", True)
writer.WriteLine(PlayerName)
[code]......
I have a text file in this format
Date TimeTickerSectorOpenHighLowCloseVolumeAsk AskVolBid Bid VolMidSpread Fact1
200802069:30:00AAPL45130.88130.88130.88130.88294028130.93850130.92700130.9250.500000
200802069:30:05AAPL45130.92130.95130.82130.9417294130.95700130.94100130.945-0.200000
[CODE]...
Basically I would like to read in this file line by line and separate every every field into a custom variable and then do some processing. So, I would read in the first record and put the data into these fields
date
time
ticker
sector
open
high
ETC
I started coding this using a TEST file that only had two fields name and a number
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'Dim FILE_NAME As String = "C:aaple2.txt"
[CODE]...
I got an unhandled exception on this line: mNum = objReader.ReadLine
I have written a simple script to get a bunch of lines from a text file (they will be filenames eventually) which are split by new lines and puts each one into an array..
Dim ary() As String
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
If My.Computer.FileSystem.FileExists("C:MenuFiles.txt") Then
[code]....
The only thing I can do for now is either use the substring function to remove the first character from all array values after 0 but I don't like that because it's messy and what if the split "works" as I want it to one one of the lines and knocks of the first character when I don't want it to.
when using stream reader to read text files how would i go about reading or referencing specific lines.so if i wanted to read from say line 2, 3, 4 or 10,11,12 in the textfile or what ever.
View 7 RepliesIt's a list of computer systems, basically, that the user can purchase.I need to read this file, line-by-line, into an array. Let's call this array csvline().The first line of the text file would stored in csvline(0). Line two would be stored in csvline(1). And so on.(I've started with zero because that's where VB starts its arrays). A drop-down list would then enable the user to select 1, 2 or 3 (or however many lines/systems are stored in the file). Upon selecting a number - say, 1 - csvline(0) would be displayed inside a textbox (textbox1, let's say). If 2 was selected, csvline(1) would be displayed, and so on.
It's not the formatting I need help with, though; that's the easy part. I just need someone to help teach me how to read a CSV file line-by-line, putting each line into a string array - csvlines(count) - then increment count by one so that the next line is read into another slot.So far, I've been able to paste the numbers of each system into an combobox:
Using csvfileparser As New Microsoft.VisualBasic.FileIO.TextFieldParser _
("F:folderprogramnameprogramnameinDebugsystems.csv")
Dim csvalue As String()
[code].....
But this only selects individual values. I need to figure out how selecting one of these numbers in the combobox can trigger textbox1 to be appended with just that line (I can handle the formatting, using the string.format stuff). If I try to do this using csvalue = csvtranslator.ReadLine , I get the following error message:"Error 1 Value of type 'String' cannot be converted to '1-dimensional array of String'."If I then put it as an array, ie: csvalue() = csvtranslator.ReadLine , I then get a different error message:"Error 1 Number of indices is less than the number of dimensions of the indexed array.
