Am trying to retrieve data from sql server based on two columns. Its a web application being developed using VS2010 (vb.net) but i keep getting the error: incorrect syntax near '='
Here's my code below:
Sub GetBasicMidwives()
' Set the SelectCommand properties...
With objDataAdapter
.SelectCommand = New SqlCommand()
[code].....
I am creating a project in VB.NET in which one of the reports require that the name of employees should be displayed as column names and whatever work they have done for a stated period should appear in rows below that particular column.Now as it is clear, the columns will have to be added at runtime. Am using an ODBC Data source to populate the grid. Also since a loop will have to be done to find out the work done by employees individually, so the number of rows under one column might be less or more than the rows in the next column.Is there a way to create an empty data table and then update its contents based on columns and not add data based on addition of new rows.
View 1 RepliesI use Visual Studio 2010 and SQL Server 2008 R2. I have created an Entity Model in a class library which I have referenced in a VB Winforms project. I created a data source in the project based on the entity model in the dll. However, all columns in the data source are listed in alphabetical order instead of the native order from the SQL Server database. I cannot locate the cause of this as much as I try.
This might not seem a huge problem, but it is costing me valuable time in rearranging controls dragged to forms and reindexing their tabstop indexes.
I am(beginner) trying to make a simple application using visual basic 2008 and sql swerver 2005.The connection is successful and i can add/update/delete data sucessfully from sql server database but now i want to show the data from sql server to textbox on the visual basic form. i have tried the following code but this doesn't work and even there is no any error.[code]...
View 11 RepliesI am using visual basic 2008 and sql server 2008. I am trying to retrieve data from a table in sql server 2008. I am using the following code
Dim cn As ADODB.Connection
cn = New ADODB.Connection()
Dim rs As ADODB.Recordset
rs = New ADODB.Recordset
Dim cnstr As String
[Code]...
I want to collect all stocks information within 2009 & 2010. I stored the required parameters (YMD & stock code) in DB. Is it possible to write a VB.Net windows application to pass all required parameters (post method) to web server and retrieve the web response automatically? (1 - 5 are valid stock code) It is
View 2 RepliesI had tried to use SQL statement to retrieve data record from SQL server, but when the database grow, the query speed getting slower. I just want to get most recent 5 records, any way to make it fast? Below is the SQL
SELECT Top (5) EventNumber, IP, DateTime, DateTimeStamp, EsdMaxLog, EsdMaxLin, EsdMaxAbs, EsdCntAll, EsdCntLast, SvMax, SvCurrent, EsdLimLog, EsdLimLin,
EsdLimAbs, Distance, SvRange, CdmFilter
[code]....
I am looking to define data types by fields in SQL Server 2005. My source is an Excel spreadsheet and I cannot define by columns because each row requires a set of definitions applied to each field in that row. Ex, row 1 requires field1 to be CHAR while in row 2 field 1 needs to be DATE.
View 1 RepliesNote: Combobox contains company name, then when i select one of the company in the list, the information on the table connected to to the company table like purchase order table info will appear on the datagridview.
View 2 RepliesI have a combobox where the user can type the sql server name. Then a connect button that, when the user click, I want it to populate another combobox with all the databases from the server in the previous combobox. Unfortunately, I am getting the error object reference is not set....!
Here is where I am getting the error:
For Each objDB As Database In Me.SMOServer.Databases
I am new to VB ...I'm using vb2008 connecting to sql server 2005.
Here is my complete code:
Imports Microsoft.SqlServer.Management.Smo
Imports Microsoft.SqlServer.Management.Common
Public Class Form1
'Public Class frmSQLConnection
Private m_objServer As Server
[Code] .....
I have a task to create a web service to receive client-side app's http request(with rpc={json data} in the end), deserilize it and put he parameter in stored Procedure in order to retrive data from sql server. the procedure query and client-side's app are already there and the return data to client-side app is JSON too
View 1 RepliesI'm using VB.net 2005. I have working programs that I populate DataGridViews with something like the following:
[Code]...
I have a Dataset with a Bunch of Columns used in a Report (DevExpress XtraReports) (DataSet being the DataSource). The Dataset has many columns, and i need to read a column (based on the row type), and decide which column value to read for the row, and apply formatting based on the row type.
[Code]...
Is there a suggested way to handle this in the Report or at DataSet Level (excepting the formatting part)?
I hve crete information application...
i using this code to save employee information into accessdatabase[code]...
What i am trying to achieve is that there are 7 columns in my db table. one is primary key and rest 6 are integer columns. Now my application will allow user to input 6 values. I want to compare 6 values entered by user to those 6 integer columns and if in any row 3 or more columns match user's input Primary key of that table is returned..I have tried using queries, cursor, nested loops and i am still unable to achieve my results..
UPDATED :DB Table Structure.. I am inputting 2,3,7,11,45,65. Number of returned rows should be 5. eg..
UID A1 A2 A3 A4 A5 A6
-----------------------
1 2 3 4 5 6 7
2 2 3 4 55 56 57
3 65 11 45 66 67 68
[code]....
IDs returned should be 1,3,4,9,10
I have a monthly forecast showing expense accounts by cost centre so columns headings look like:
Cost Centre, Account Number, Jan, Feb, Mar etc
Using VBA code to automate the process, I need to calculate the total for each month of each account number where the 2 left characters of the cost centre are the same. I have a formula which will calculate this (for one cost centre grouping/account) which looks like this:
=SUMPRODUCT((LEFT('Sheet2'!A6:A5136,2)="BE")*('Sheet2'!C6:C5136=AccountNumber)*('Sheet2'!D6:D5136))
I am not sure whether there is a more efficient way than using a formula like that (at the moment this would be used for 12 months on about 6 cost centre groupings with about 500 accounts each - though this would vary). Its not massive, but could be slow to calculate. I don't think the subtotals command is powerful enough, and I haven't used arrays for a long time (especially for what would appear to need a dynamic, mulch-dimensional array).
What is wrong with this, it throws a debug error.[code]...
View 3 RepliesI want to change the row color of every row in my DataGridView where a particular column value = "RBF3". I am currently using the DataBindingComplete event which seems to work fine, but it fires every time I change a cells value. I'd like for this bit of code to only fire when the datagridview is first displayed, sorted, or filtered. Is this possible?
[Code]...
I fought through a good amount of this and have gotten to the point where I can sort my arrays. What I need to do now is take the following code and sort the elements in descending order instead of ascending order. I don't know how to do that with the two arguments in the code:
Dim Cols(3) As Int16
Cols(0) = ColumnNumber + 1
Cols(1) = ColumnNumber + 2
Cols(2) = ColumnNumber + 3
[Code].....
I need a Generic function to retrieve the name or value of an enum based on the XmlEnumAttribute "Name" property of the enum. For example I have the following enum defined[code]...
View 3 RepliesThe user picks x amount of scenarios from the combobox, and x amount of columns appear in the datagridview. If the user changes the number of columns from x amount to y amount, the columns should be added/removed respectively but currently when y amount is chosen x amount of columns are in the datagridview.
I'm not sure how to do this, I've tried using an IF statement under the .SelectedIndexChanged event but the code adds columns until it reaches as high as it can go, then pulls an error saying too many columns.
I am trying to figure the best way to programmatically re-size table column headers in ReportViewer.Basically, my current resolution is the following: ColumnWidth = Header Caption_CharacterCount * 0.32...Where 0.32 is an estimated width of a typical character using my current font size.The issue is that the width leaves a lot of whitespace for longer captions.The more characters a caption has, the more whitespace I end up with.The issue with estimating this way is that not all characters are the same width. A good example would the the "I" character, which takes up less screen width than the rest of the alphabet.[code]
View 1 RepliesI have a DataGridView that has been dragged over from the DataSource Tab. All works good.I need to have the background color of some of the cells changed based on other columns in that same row. Such as, have the background color of a cell Red if the Status column (not shown) relates to 90 days overdue. The next row may be different.
View 6 RepliesI want to make a certain column of my datagridview red based on values from 2 other columns. I have a "HI" column, a "LOW" column and a "Result" Column which are all strings. Now I want to make the result column red if it's values is less than the "LOW" columns value or if it's value is greater than the "HI" columns value. I tried the following code but something is wrong because cells that shouldn't be red are red:
Private Sub dgvTests_CellFormatting(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellFormattingEventArgs) Handles dgvTests.CellFormatting
If dgvTests.Columns(e.ColumnIndex).Name.Equals("Result") Then
Dim RowValue As DataRow = TestTable.Rows(dgvTests.CurrentRow.Index)
[Code] .....
I need to duplicate records with duplicate records, but only if the first three columns out of 5 columns are duplicates. I am using MS ACCESS with VB.NET. How do I loop through the records and delete records with three duplicate columns
View 1 RepliesIn a vb 2010 project, I have 2 win forms: Form1 and Form2.
In the Form1 class there is a server-based timer: when the "elapsed event" fires, then I update the text of a Label1 on the Form2. A very simple code:
Q:how can i add columns dynamically to rdlc report from dataset in windows based.
View 1 RepliesI have been working on a web based report from an existing client/server apps mssql database. I have a working query, that pulls this information together from many tables, and can provide the query and a result set if necessary.
The results currently are similar to this.
ID | Name1 | Date1 | Veh | PO | Stops
_________________________________________
1 | Bob 1 | 12/1 | Car | 1234 | 4
2 | Sam | 12/3 | Car2 | 2245 | 3
2 | Joe | 12/4 | Van1 | 5568 | 2
[Code]....
I have combobox for year and combobox for month concatenated to make the date format "2012-01" My db field is RecordDate and is smallDateTime In my select statement im trying to use the left function to find match my concatenated string to the RecordDate field.Here is my code, hopefully someone can help me. Currently im getting the error "Conversion failed when converting date and/or time from character string."
Dim newRecordDate As String = (CStr(ComboBox2.SelectedValue)) & "-" & val1
Dim val10 As String = CStr(Convert.ToDateTime(newRecordDate))
Dim val21 As String = Microsoft.VisualBasic.Right(val10, 7)
MsgBox(val10)
[code]....
is there a way to retrieve text value from a listbox based on index ?like if i enter index 0 and want to retrieve it's text value from the listbox
View 5 Replies