My VB.Net project is connected with MS Access. Whenever input in VB, it will save in Access. I don't have any problem with textbox but I don't know what to do with checkbox and radiobutton.I want, when checkbox or radiobutton is checked in VB, it will checked also in Access.This is my code for textbox:
Dim con As New OleDb.OleDbConnection
Dim ds As New DataSet
Dim da As OleDb.OleDbDataAdapter
Dim sql As String
[code]....
What should I change to make Access save checkbox and radiobutton?
I want the strings of RichTextBox1 and RichTextBox2 (strings are separated by newlines) printed to RichTextBox3 along with selected RadioButton's name and ticked CheckBox's name.[code]
I am working on a school project to display a photo of a professor when their name is selected using a RadioButton and to display their name, office office hours and so on.
I have their Photos in a directory on my computer
Theonly thing I cannot figure out is how to use 1 picturebox and link the image to display to the radiobutton.
I have tried all kinds of queries on the internet and cannot locate the answer. There might be something with an Image.FromFile command I saw but that might have been from a previous version of VB and I could not get it to work in VB9.
I want to change the CssClass for the RadioButtonList while populating the theRadioButtonList. I don't know how to access the radio button while binding the list. do I need to use DataBind or DataBounding event ? and how ?
checkboxes in the listview. I want to save the settings of the checkbox when I tick and untick them in the listview, e.g tick and untick the checkboxes and save the subitems text in the label text.So I can read the settings from the label and split it to read each text. how i can save the checkbox settings before I can read the subitems text when I click on the button?
I need a form width a checkbox "Don't show this again" for my winform, but how can i make this so when my Form1 loads it checks the state of the checkbox using the getsettings option?
How can is save the checkbox state to the registry? and how do i get the state?
If Form2.Checkbox.checked = Getsettings() Then Form2.showdialog Else Goto Skip End IF
On the form that i have there is a listview with checkboxes enabled it all works fine but when i close and reopen the form all the previous checked checkboxes are uncheched . Is there a way to save the state of the checkboxes and on form load to restore them ?
I'm looking how to save the checked checkboxes in a treeview which contains a lot of folders and subfolders.Is it possible to save them in the application settings ?
I have 50 checkboxes for 50 american states. The user can choose all 50 or only 1( so basically any number he wants). Based on his choice, I want to insert or update the table in sql server 2008. e.g-
Color = blue and chk1=check, chk2= check and chk3 = check (chk = checkbox). now the user wants to ad 10 more states to this or remove these 3 and add 5 more. so u basically get the idea. the table in database looks like this - ID Color State_id there is a table called states, so stateid shall come from there. so how do i do a loop insert or update in vb.net?
I am wanting to add a date to a database if a checkbox is checked when clicking the save button on the DataBindingNavigator. If it is unchecked I want it to add nothing to the database but if there is something there it clears it. Why can't you add a blank value to a database? I'm stuck on how I can accomplish this. Here is a basic explanation of what I'm wanting.
WHat i have done is Create a SQL string that takes the ID 544 and searches through database. If a match is found the the same as the LOCATION name on another Table then it takes the LOCATIONID (it will be the ID, but not at the moment) and puts it into a listview along with its IN STOCK.THe location Table looks like so:
IDLocationName 3MainWarehouse 4StrongRoom
[code]....
Running through this code. The system checks the "NewLocation" checkbox ONLY!
I have a datalist, and each item in the datalist has a checkbox and disabled button, I want when the checkbox is checked, the button will be enabled. How to access the check box event for an item in the datalist ?
I am looking for a way to save and load the values of all my controls present in my form.My form has around 100 controls spread over 7 tabs. The controls include (Multiline) TextBoxes (Strings), NumericUpDowns (Integers, Decimals) and Checkboxes (Booleans). If the user clicks the save button a "Save File" dialog should appear allowing the user to specify the directory and the filename of the save file.All the values of the controls should then be written to that file.If the user clicks the load button an "Open File" should appear where the user can pick a previously saved save file. All the controls should then adopt the values found in the save file.I have implemented Application Settings in my form, and now when I click save, it saves the control values through My.Settings.Save(). If I click load it loads them.However, my project requires that multiple save files can be made to reflect multiple configurations. As I understand Application Settings only allow for a single .config file in the Application Data folder.So how can I code a save/load routine to save/load different configurations?
I'm trying to create a installation setup for my VB.net application. I need to insert a custom action while setup is running. So I add a Checkbox Dialog box to my setup. And I add a dll to the setup installation to capture Before Install and After Install events. Those are works fine. But I cannot access my check box value in those events. [code]
I am creating a Microsoft Access 2003 database which will be using Visual Basic code in the backend.I have a form called frmReports. On this form are three option groups consiting of checkboxes. What I want to happen is if one of the checkboxes is checked, then the other two option groups are made invisible.
The context of the problem is a teacher is reporting on pupils. If a pupil is marked as being absent from class, the other two option groups (Behvaviour and Homework) disappear as no other information can be input.
where I want to use the Select All and Deselect All CheckBox. There is no Visual Studio installed there. They want everything in Access. Visual Basic is not installed, it is within the Access interface. Is there a way I can use VB code to have a Select All and Deselect All option. I dont want any code. Just want to know if it is possib
I am trying to access the checked state of a CheckBox from a BackGroundWorker thread. I am utilizing properties and it seemed to work just fine. However, I'm using 10-15 CheckBoxes and I think using the InvokeRequired property would probably be best. I've looked over JMC's thread that talks about how to access controls from the worker thread a bunch of different times and I can't seem to grasp the concepts. When it comes to the InvokeRequired property, I suppose I understand why it is needed. But I'm not sure if I understand it completely.
From the example that JMC provides: vb.net Private Sub ResetTextBoxText() If Me.TextBox1.InvokeRequired Then Me.TextBox1.Invoke(New MethodInvoker(AddressOf ResetTextBoxText)) Else Me.TextBox1.ResetText() End If End Sub
If I'm not mistaken, this tells us that if invocation is required to access the control, then we access via the MethodInvoker if not, then we just access to directly? So, if I need to check the checked state of a check box, I know I can just put a conditional statement after the Else line if I can access it directly. But, if I can't how would I use MethodInvoker to check the checked state? And then, when calling it from the worker thread, would I just call the sub?
I can save my data to access database and in the access database field I set it to date/time.But problem is when I get the value out from the database.. the format is always month/day/year hour:minutes:seconds example today: 5/2/2011 12:00:00..How to get the value into listview becoming May/2/2011 without the hour..Here's my code to get it from database ListView1.Items(i).SubItems.Add(dt.Rows(i)(14).ToString).The second problem is.When I would like to edit, how can the datetimepicker get the listview value ? [code] info: using access 2003 (.mdb) the Date of Birth field has been set into Date/Time.
I have a question, I can't really find the answer...Basically I have 2 FormsIn form number 1 I have 2 pictureboxes. I want to create a checkbox in form2 that says if checkbox 1 is checked then show picture 1 in form 1
I have a ListView with Checkboxes in vb.net and what I want to do is when the user check the checkbox, the program ignore the response of the user in checking the checkbox, instead it leaves the checkbox uncheck.
I am creating an Interactive map which displays the facilities when the user clicks on the Checkbox, such as toilets.It will display all the toilet locations via PictureBoxes.I want to do this without having to write all this code?[code].....
i have 5 checkboxes in webform and textbox1... when i search the record using the date specified in textbox1 when i enter 11-Dec-2010 in Textbox1 and click on submit button then checkbox1, checkbox2, and checkbox3 will be disabled and unchecked .....
I have a DataGridViewCheckBoxColumn who's column name is "booReadyToReport want to hide all the checkboxes in this column if "bintAnalyteCodeID" doesn't equal the selected value in a combobox on my form. ut I run this bit of code the DataGridView DataError event fires currently, have nothing in the event except an comment. he code seems to work, but I'm new to VB.NET and I'm wondering if this is the correct way to handle thishould I use the CellPainting event?
highlight rows with RBF3 For Each dr As DataGridViewRow In Me.dgvCalculatedResults.Rows f dr.Cells("bintAnalyteCodeID").Value = Me.cbxAnalyte.SelectedValue Then
umm well the code i posted is all the last bit of code...so mayb thats where my problem is. What sends the changes? i know the code above changes the datagridview data but it seems it not changing the DB
