what is the best way to save variables from one session to the next.when the program starts i want the defaults to be the same but as they are changed in the program the stored value should update.
View 2 RepliesI have an ASP.NET application that I am developing. I'm using session variables within the app.In Firefox & Chrome, they all work.But in IE (ver 9), there's one variable that's not working. I'm not sure if it's a storage or a retrieval (or both) at this point. The variable in question that I'm storing is a List(T) type. It's the only one of it's kind that I'm using. Can't help but think there's a correlation there.One other old post mentioned the possibility that cache is causing the problem, but I didn't understand the answer very well.
Dim Rec_IDs As New List(Of String)
Rec_IDs = Session("Rec_IDs")
and
Dim Rec_IDs As New List(Of String)
[code].....
I am using a sqlDataReader to get data and set it to session variables. The problem is it doesn't want to work with expressions. I can reference any other column in the table, but not the expressions. The SQL does work. The code is below.
[Code]...
I have an ASP.NET 2003 web application. There is a .vb module file within that application. Is there anyway I can pass a session variable into this .vb module from a aspx.vb page?
View 2 RepliesI loading an array with data from my data base and then putting into a session Variable. I do not get any errors on that code. When I try to put the session Variable back into an array in my .aspx page I receive the following error message: [code]
View 5 RepliesI'm planning to use some session variables on an intranet ASP/VB.NET page, and want to make sure that I'm not missing out on anything important I should know, or that I have my information mixed up. So here's what I (think) I know about session variables.They:are stored on the server, so if I have a lot of users then they'll each be using some more memory which could lead to a slowdown.are inaccessible by the user unless I expose access. hang around/persist across user requests (i.e. each time the user makes a request from the page the data will still be there - until it times out). This also means that I need to make sure that the variable doens't have "left over" data in it.
Is there anything that I've got totally wrong, or anything I'm missing? I'd prefer not to get bitten by a bug down the road because I think I understand what's going on.
I am trying to create an application similar to a quiz engine. I was wondering if I need session variables to store information between different pages or I can pull the data directly out of textboxes.I am using C-sharp,dot net and WPF.
View 4 RepliesI have an ASP DataGrid and I'm applying sorting to it. Well, as I was looking at an example, they had a function similar in function, different in name, to[code]...
View 3 RepliesI have some VB code, which I can no longer use (long story). It goes like this:
Session.Contents("LetterVariables") = Nothing
Is there a javascript equivalent?
I am trying to fix an ASP.NET application that is also written is VB and uses session variables to store the information from the logging page. In Firefox, the application runs just fine, but in IE (I am using IE 8), when I summit the logging credentials, the session variables become empty (takes me back to the logging pageThe weird thing is that when I move the privacy settings in IE (doesn't matter if high to low, or low to high) and enter the logging information again, the runs great. Also if I restart IIS 6.0 the application runs great. What's going on?
View 5 RepliesI am using this example I found to learn how to load class files and access variables through them. This is in a file called Class1.vb in the App_Code folder (this is not an app project):
Imports Microsoft.VisualBasic
Public Class my_class
Public Shared Sub my_sub()
[Code]....
How could I access the vartest variable without using a session, since if this is accessed by multiple functions at the same time the variable can be overwritten I assume. Is it possible to go the other way, where a variable is sent to a class file?
I've got a problem losing session variables in an ASP/VB.NET application. The application allows searching for an item or it can show an item if provided with a unique link (in the browser). It holds information about the item in session variables. In the webpage showing an Item a user can click a button which opens a window with additional information about the item - obtained from a session variable. When I search for the item using the search engine and click the button - it works OK.
When I copy the link to a browser: the item is shown, however clicking the button returns a 'null exception' - the session variables with information about the item are lost. Moreover when I provide the link for the second time the button works, the variables are there!
I have a gridview and use a session to pass the variables from the page to an edit page. This works perfectly, until you search for a number. When you search the correct record displays in gridview, but when you click edit, it passes the wrong record.
Private Sub gridview1_RowEditing(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewEditEventArgs) Handles GridView1.RowEditing
Session("wr_id") = GridView1.Rows(e.NewEditIndex).Cells(2).Text & "~/~" & _
GridView1.Rows(e.NewEditIndex).Cells(3).Text & "~/~" & _
GridView1.Rows(e.NewEditIndex).Cells(4).Text & "~/~" & _
[Code] .....
I realize not all of the code is pasted in here, because it would take too much space. Any Ideas? I'm guessing it has something to do with e.NewEditIndex
I have a web application that allows a user to view family members.
When the user clicks on a family member, it displays the member's basic info. There is also a grid displaying that family member's related family members. (e.g. User can click on the Father link. From that popup, they can then click on the Father's Father link, then click on the Father's Father's Grandson link, etc.).
To reduce the number of popups that appear on the screen, I want to prevent the user from continually clicking on family links past three members.
What is the best way to keep track on how many data forms have popped up? Or can this reliably be done with a web application?
I have an MVC application which sets some session variables based on internal static IP addresses.I have built an ApplicationController to override the OnActionExecuted sub in MVC for data that I need to use throughout my application.However, the code below, which is just a snippet of my code but is edited for my post, only partially works. On initial page load, the session variables aren't saved, but after a page refresh they are. The issue I have is that these need to be saved on the initial page load.
If Session("Item1") = Nothing Then
If IpAddressShort <> "" Then
Dim locInfo = cmsRepository.GetInfoBasedOnLocation(IpAddressShort).SingleOrDefault()
If locInfo IsNot Nothing Then
[code]....
Theoretically, if I'm correct, if there is no Session("Item1") set/if Session("Item1") is empty, then the rest of the snippet should run and set those variables.How come this isn't setting those variables on the first time the page load?
Is there a way to set session variables during login that are then available to reports? We have a reporting services server where we move and denormalize data from our transaction system for reporting purposes. In order to allow our users to login with the same user name and password from the transactional system we have set up custom forms authentication and after much trial and error it is finally working. In addition we have the authorization accessing our transactional system so that any changes in user authority is immediately reflected in Reporting Services.
Our problem now is that we would like to add some additional features such as locking down parameters depending on user authority/groups in our transactional system. We have found a way to do it but it's inefficient, basically we have stored procedures that will query our transactional system to check for access. The problem is that these queries will often be run for every report request even though the answer is unlikely to change. It would be nice to have access to session level data that can be set once during log in and then accessed from the reports.
I have a login page that return the userName to a page called User.aspx.The User.aspx shows the information about the user based on a sql select. I fill 12 labels on the page with the result of the select.I want to keep the information of my 12 labels if the user Quits and enter again in the page.I save my session
Session("UserPage") = (litHello.Text And litAddresse.Text And litAnimalGenre.Text And litCouriel.Text And litNomAnimal.Text And litPays.Text And litPostalCode.Text And litProvince.Text And litRace.Text And litTel.Text And litVille.Text)
Now how I can proceed too fill all my label with my saved session call UserPage??
I am storing a session variable that a user types into a textbox. With their valid input, their session gets created and they get a little more functionality than the regular end users of the site.I was wondering if it is possible to find a way to add someone's session variable to the end of a URL. This way we can email a link to one of our clients, they click it, and their session has automatically begun. They already have the textbox to enter their code into, but I was told that it would be much easier for the users to just click a link that will start their session.
View 1 RepliesI am trying to build a game (out of fun) similar to those text based games like Wars, iMobster (which can be found on Facebook/iPod). And I came to the point where I need to create a Save/Load system. My game currently has 50-ish variables, and it would be nice if there would be a way to save them in the application themselves, so when it is opened the next time they are all there. I know I can write the variables to a .txt file, and then pull them from there, but those are easy to modify, plus that means one file for each variable (right? Unless there is a way to save all my variables into 1 .txt file?).
View 11 RepliesI've got a RPG style game I am putting together - mostly to teach myself vb.net. I am using alot of global variables to hold game values.[code]...
My question is -- I am trying to make a "SAVE" and "LOAD" the game's state. Is there a simple way to save the values of all my global variables, without having to type everysingle variable out. Is there anyway to call upon all my global variables at one time, and possible save/load them to a text file ?
On startup of my software which i developed in vb.net, it connects to mssql server. I want to have session id or session number of the connection with mssql. I'm sure it is unique number and i want to use this session in my software for different purposes. My question is
1. is there anything like session id or session unique number when you connection mssql server
2. if yes to 1 then how i can get it in vb
when an exception occures, I want to save the data available on the stack and log it. how can I serialize all the available local variables and save them?
View 1 RepliesHow can i make variables stay true even after i close my program so on next run there still true?Heres the Code i am using to set the variable (if it helps) :
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim Activated As Boolean
If Activated = True Then
[code]....
BTW this is to check if the product has been activated or not.
I want to save some strings in a Session("myKey") as an ArrayList in my asp.net application.
So I have somthing like that:
Dim s As String = "String1"
If I use
Session("myKey") = s
it is working for the moment.
After PostBack I want to add another string to the session.
If do the same thing again, then i will overwrite my Sessiondata.
So I'm searching for something like this:
Dim s As String = "String1"
TryCast(Session("myKey"), ArrayList).Add(s)
In this case the Sessiondata would be stored correctly, but my code is not correct.
I am using the DataGridView in Visual Basic 2008 Express with an Access 2000 database.
What I'm trying to do is allow the user to click on the Row Header and capture the contents of the 4 cells in the row to 4 dfined variables. I know that I can capture each cell individually by using the CellContentClick event but this would require the user to click 4 times rather then just once.
Im currently writing a sort of Tamagotchi game or "virtual pet". It's really basic, it runs on timers and has a health meter, hygiene, happiness etc. The problem I have is when the program is closed it obviously resets the properties back to the origional settings. Is there a way I can save the state of the program so when the user opens it back up it is as the same as of the point when it was closed?[Just had an idea, would I set a timer to periodically save the value of the variables to a database and then have them load the next time the user opens the program, for example if the health was 50% on closing or at intervals it would save the health into a column in a db table then when the user re opens the program call that db?]
View 5 RepliesI am creating a very simple game for a project. There is opportunity for bonus marks, and one thing I would like to do is be able to "save" the game. The only thing I need to do is save about 4 variables to be recalled the next time the program runs.
What is the best way to do this?
I have searched Google, and there are ways to link the program to an Access database, but that seams a little extreme. I tried seeing if you can make an XML file to hold them, but I can't really find any good information.
I am developing a program where i will download and save an xml file from a url as abc.xml. I open the abc.xml in a datagridview with a dataset without problem.I am confused how can i read raw per raw the datagridview and assign the data in a database table? i am using vb 2008 + msde2005 express.I show the whole content of the xml file in the datagridview with the following [code]I dont know how to create a loop where i can read the datagridview line by line save data in variables (ex.strings) and save it in a databese table?
View 6 RepliesLast year (2010) I came across a FANTASTIC command that allowed me to take a string of variables with a common delimiter and break it all back out into separate variables (possibly an array) with one statement.
[Code]...
As long as the delimiter was a unique specifiable character, this one-statement command could break it out into elements. my memory and point me in the right direction.
I have code, shown below, that works all except for 1 thing: The variables being passed byRef get passed, but once modified in the else section of the "if me.invokerequired" code of RecordData, the variables are never updated in the calling function. To reiterate, the calling function does not receive the updated data that is in the variables custid and amt.When debugging, I see the data change in the else section of "if me.invokerequired", but once it returns from the callback the data is missing.[code]
View 15 Replies