I am using a sqlDataReader to get data and set it to session variables. The problem is it doesn't want to work with expressions. I can reference any other column in the table, but not the expressions. The SQL does work. The code is below.
[Code]...
I have an ASP.NET application that I am developing. I'm using session variables within the app.In Firefox & Chrome, they all work.But in IE (ver 9), there's one variable that's not working. I'm not sure if it's a storage or a retrieval (or both) at this point. The variable in question that I'm storing is a List(T) type. It's the only one of it's kind that I'm using. Can't help but think there's a correlation there.One other old post mentioned the possibility that cache is causing the problem, but I didn't understand the answer very well.
Dim Rec_IDs As New List(Of String)
Rec_IDs = Session("Rec_IDs")
and
Dim Rec_IDs As New List(Of String)
[code].....
I have an ASP.NET 2003 web application. There is a .vb module file within that application. Is there anyway I can pass a session variable into this .vb module from a aspx.vb page?
View 2 Replieswhat is the best way to save variables from one session to the next.when the program starts i want the defaults to be the same but as they are changed in the program the stored value should update.
View 2 RepliesI loading an array with data from my data base and then putting into a session Variable. I do not get any errors on that code. When I try to put the session Variable back into an array in my .aspx page I receive the following error message: [code]
View 5 RepliesI'm planning to use some session variables on an intranet ASP/VB.NET page, and want to make sure that I'm not missing out on anything important I should know, or that I have my information mixed up. So here's what I (think) I know about session variables.They:are stored on the server, so if I have a lot of users then they'll each be using some more memory which could lead to a slowdown.are inaccessible by the user unless I expose access. hang around/persist across user requests (i.e. each time the user makes a request from the page the data will still be there - until it times out). This also means that I need to make sure that the variable doens't have "left over" data in it.
Is there anything that I've got totally wrong, or anything I'm missing? I'd prefer not to get bitten by a bug down the road because I think I understand what's going on.
I am trying to create an application similar to a quiz engine. I was wondering if I need session variables to store information between different pages or I can pull the data directly out of textboxes.I am using C-sharp,dot net and WPF.
View 4 RepliesI have an ASP DataGrid and I'm applying sorting to it. Well, as I was looking at an example, they had a function similar in function, different in name, to[code]...
View 3 RepliesI have some VB code, which I can no longer use (long story). It goes like this:
Session.Contents("LetterVariables") = Nothing
Is there a javascript equivalent?
I am trying to fix an ASP.NET application that is also written is VB and uses session variables to store the information from the logging page. In Firefox, the application runs just fine, but in IE (I am using IE 8), when I summit the logging credentials, the session variables become empty (takes me back to the logging pageThe weird thing is that when I move the privacy settings in IE (doesn't matter if high to low, or low to high) and enter the logging information again, the runs great. Also if I restart IIS 6.0 the application runs great. What's going on?
View 5 RepliesI am using this example I found to learn how to load class files and access variables through them. This is in a file called Class1.vb in the App_Code folder (this is not an app project):
Imports Microsoft.VisualBasic
Public Class my_class
Public Shared Sub my_sub()
[Code]....
How could I access the vartest variable without using a session, since if this is accessed by multiple functions at the same time the variable can be overwritten I assume. Is it possible to go the other way, where a variable is sent to a class file?
I've got a problem losing session variables in an ASP/VB.NET application. The application allows searching for an item or it can show an item if provided with a unique link (in the browser). It holds information about the item in session variables. In the webpage showing an Item a user can click a button which opens a window with additional information about the item - obtained from a session variable. When I search for the item using the search engine and click the button - it works OK.
When I copy the link to a browser: the item is shown, however clicking the button returns a 'null exception' - the session variables with information about the item are lost. Moreover when I provide the link for the second time the button works, the variables are there!
I have a gridview and use a session to pass the variables from the page to an edit page. This works perfectly, until you search for a number. When you search the correct record displays in gridview, but when you click edit, it passes the wrong record.
Private Sub gridview1_RowEditing(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewEditEventArgs) Handles GridView1.RowEditing
Session("wr_id") = GridView1.Rows(e.NewEditIndex).Cells(2).Text & "~/~" & _
GridView1.Rows(e.NewEditIndex).Cells(3).Text & "~/~" & _
GridView1.Rows(e.NewEditIndex).Cells(4).Text & "~/~" & _
[Code] .....
I realize not all of the code is pasted in here, because it would take too much space. Any Ideas? I'm guessing it has something to do with e.NewEditIndex
I have a web application that allows a user to view family members.
When the user clicks on a family member, it displays the member's basic info. There is also a grid displaying that family member's related family members. (e.g. User can click on the Father link. From that popup, they can then click on the Father's Father link, then click on the Father's Father's Grandson link, etc.).
To reduce the number of popups that appear on the screen, I want to prevent the user from continually clicking on family links past three members.
What is the best way to keep track on how many data forms have popped up? Or can this reliably be done with a web application?
I have an MVC application which sets some session variables based on internal static IP addresses.I have built an ApplicationController to override the OnActionExecuted sub in MVC for data that I need to use throughout my application.However, the code below, which is just a snippet of my code but is edited for my post, only partially works. On initial page load, the session variables aren't saved, but after a page refresh they are. The issue I have is that these need to be saved on the initial page load.
If Session("Item1") = Nothing Then
If IpAddressShort <> "" Then
Dim locInfo = cmsRepository.GetInfoBasedOnLocation(IpAddressShort).SingleOrDefault()
If locInfo IsNot Nothing Then
[code]....
Theoretically, if I'm correct, if there is no Session("Item1") set/if Session("Item1") is empty, then the rest of the snippet should run and set those variables.How come this isn't setting those variables on the first time the page load?
Is there a way to set session variables during login that are then available to reports? We have a reporting services server where we move and denormalize data from our transaction system for reporting purposes. In order to allow our users to login with the same user name and password from the transactional system we have set up custom forms authentication and after much trial and error it is finally working. In addition we have the authorization accessing our transactional system so that any changes in user authority is immediately reflected in Reporting Services.
Our problem now is that we would like to add some additional features such as locking down parameters depending on user authority/groups in our transactional system. We have found a way to do it but it's inefficient, basically we have stored procedures that will query our transactional system to check for access. The problem is that these queries will often be run for every report request even though the answer is unlikely to change. It would be nice to have access to session level data that can be set once during log in and then accessed from the reports.
I am storing a session variable that a user types into a textbox. With their valid input, their session gets created and they get a little more functionality than the regular end users of the site.I was wondering if it is possible to find a way to add someone's session variable to the end of a URL. This way we can email a link to one of our clients, they click it, and their session has automatically begun. They already have the textbox to enter their code into, but I was told that it would be much easier for the users to just click a link that will start their session.
View 1 RepliesI'm currently working on web application using VB in ASP.NET.Right now I have 1 page with panels that we are using to show/hide depending on the flow. When the user first comes in, he/she is presented with a gridview containing a list of clients. Then the user, clicks a link from a row and is presented a form where he/she can update the clients' info.Originally, I had a HYPERLINKFIELD that put the clientId in the url, then I'd grab the url and do the code appropriately
<asp:HyperLinkField Text='<%$ Resources:Resource, ManageClient %>' DataNavigateUrlFields="CLIENT_ID" DataNavigateUrlFormatString="~/clients/manage.aspx?clientId={0}" />
[code]....
I developing an invoice page where user will select Product from a combo box (approx. 500 + item). I am loading product Name, Product ID, sales price in a session Table. After selecting the product, a textbox value will Sales Price. But it is taking so much time.
[Code]...
On startup of my software which i developed in vb.net, it connects to mssql server. I want to have session id or session number of the connection with mssql. I'm sure it is unique number and i want to use this session in my software for different purposes. My question is
1. is there anything like session id or session unique number when you connection mssql server
2. if yes to 1 then how i can get it in vb
For some reason my code is not adding customer to the session. I am new to ASP.NET does anyone have any input as to why this is happening and maybe able to give some code example.
Below it the code.
Imports System.Data
Partial Class _Default
Inherits System.Web.UI.Page
[Code]....
I have inherited some very old ASP.Net code. Written initially in 1.0 and then converted to 2.0 There is a page which uses a custom pager control. That control has the following logic in it:
Private _DataSource As PagedDataSource
Public Property DataSource() As PagedDataSource
Get
[code]....
The task at hand was to remove all session variables. What would be the best way to represent this data without the use of session. Originally i was told to put all session items into a cookie, while this worked for most of the items it will not work for this due to the cookie size limitation, Im also not to keen on the idea of keeping it in ViewState or even if that is an option. Im very new to VB and dont have much expierence re-writting legacy code. Session is not an option because this is being moved into a web-farm and Sticky sessions are turned off so it must work without session.
In VB.NET I would like to create a complicated data structure with multiple types of data stored in an array like format (see below). I am trying to create a data structure that would look something like this: [Name; xLoc; yLoc; zLoc; [Jagged Array]] Note: Name needs to be dimensioned as a string, xLoc and so forth as integers. The Jagged Array would look like this:
[Code]...
HTML URL with data variables
View 3 RepliesI am using sql in and am stuck. after "selecting * from table", how do i store whatever I have obtained from my database in a variable, for display?
View 2 RepliesI'm using Visual Studio 2010 and my software will be a Windows Forms Application.
I know it's possible to retrieve URL source codes, slice and dice them either through VB.NET or RegEx but that only applies to text/code that are in plain text like HTML code. But how do you extract code from JavaScript that in the downloaded source code doesn't display the data inside the variables, but instead the actual variables?
Below I have an example code of JavaScript variables inside a downloaded .HTML source code that, when the webpage is loaded, displays the information/data contained inside these variables in the web browser. But the data itself isn't "downloaded" or stored in the source code.
So my question is: How do you extract/retrieve the data from within those JavaScript variables?
<td>
<div class="showUserText">
<div class="outerRatingBody" style="display:none;" >
[Code]....
Is it possible through VB.NET to get what ever is inside those variables?
I have a form that has a button, when clicked it pops up a Dialog Form. Within this dialog form the user needs to select some data and when the user is finished they click the OK button. Once they click the OK button it needs to return an integer back to the previous form.I created a Dialog Form and tried calling it via the code below:
Dim intResult as Integer = frmData.ShowDialog()
Debug.Writeline(intResult)
However, it seems I can only return DialogResults (Abort, Cancel, Ignore...)I was wondering how I can try this without having to create a public variable and storing the result there.
I've been using VBA quite a bit in the past to build userforms in Access, that used user-supplied data to custom-build sql statements on the fly, query data from a linked table, read that data into variables, perform calculations and spit out results onto the userform. Now I'm wanting to do some similar things in vb.net 2008.
I would use some code like this:
Set MyRecordset = New adodb.Recordset
MyRecordset.Open "SELECT * FROM Table1", CurrentProject.Connection, adOpenDynamic, adLockOptimistic
MyRecordset.Filter = "ID = '" & Me.cmbAgentName.Value & "'"
With MyRecordset
[Code] .....
Whenever I try this, I get an error message along the lines of "Conversion from type 'Field' to type 'String' is not valid."
I need to fill a datatable(in data set) row by row by providing the the data by variables in VB.Net. The variables assigns its value by loop.. so the datatable row should be filled row by row until the loop ends. There are three columns in the table. so the table should fill with different kind of datatype variables.
View 1 RepliesIs it a good practice using global variables in a VB (.NET) application in order to exchange data between forms? As global variable I mean a public variable defined in a module and not a public member or property of a class. Moreover as my personal rule I never access a global variable from a class, but I pass the values to the class via functions.
[Code]...