I set the UseMnemonic property on my buttons to true and in the design page the desired letters appear underlined but when I run the application they aren't. Can I make them underlined for the user to see?
View 1 RepliesI am trying to build a form that will present one question at a time with true false buttons. It will tell the user how many questions they got right at the end of the quiz. how to i present one question at a time ?? since one button handles only one event.
View 3 RepliesHow would I set the value of btnGuessL.Enable property to True?
View 1 RepliesI want to create a button such that on pressing it, a property is set to true and remains true until the user presses the button next time. How is this done?
View 9 RepliesI want to check whether application is in debug mode/release mode to distinguish development & production application setting. I used custom attribute 'DebuggableAttribute' of currently executing assembly & its property IsJITTrackingEnabled to check application running mode.But this property always returns 'true' in both debug/release mode.
Can anybody let me know where is mistake or any alternative to achieve this?
I am stumped on this one. I have a panel (pnlKeyPad) that won't change the visible property when I try to set it to True. But when I try to set the Dock Property to DockStyle.Fill it succeeds. I have tried them in different orders, setting the parent property to the splitpanel and nothing seems to fix it. The panel is on a splitpanel that is visible. The panel is set to visible = false by default.
Any ideas of why this panel won't switch to visible when I specifically set it to visible?[code]...
In VB6, you can set the Default property of a command button to True / False, and when you push the enter key, it will click the button for you.
What property is this in VBNet / C#?
I know how to turn a control's visible property to true or false, the only thing I don't know is: If I have, for instance, 40 group boxes in which only one is visible, when I click on a button, the first group box visible = false and the second group box visible = true, and when I click on it again, the second group box visible = false and the third group box visible = true, and so on I don't want to write the codes for every controls, since it will be quite time consuming, I want to use fewer codes to achieve this objective,
View 10 RepliesI use lots of panels to hide controls and display groups of controls.
If sender Is BDVActive Or sender Is BDVCompleted Then
BDVCases.Visible = True
BDVCases.BringToFront()
[Code]...
I would like to overrides the datetimepicker object to remove the texte when the property _clearOnDisabled is true. When _readOnly property is true, I would like to show the text in black not gray. So I tried with WndProc but I seem that every single object go through my function not only my datetimepicker. I get 100% CPU when I put the WM_PAINT message. I also tried to overrides the OnPaint but its not getting in.
Imports System.Drawing
Imports System.Windows.Forms
Imports DTP.WindowsMessages
[code]...
since property binding is not working with radio buttons well i am manually writing the code. [code]
View 2 Replieshow to turn on allowheaderfilter property to true for a specific column. It appears that I can only do this in design view. I must be able to do it code behind as I have certain conditions when this can be done.
View 1 RepliesI have code running in the Datatable.ColumnChanging event in my dataset. This dataset underlies a form and conventional drag/drop controls are in place for data entry.when the event triggers and runs, I am running code in the form that checks the dataset.HasChanges property. It is showing False. But this is immediately after the ColumnChanging event has been triggered.Okay, I see by others posts and MSDN that .HasChanges will only be true after moving off the row with the changed column. I have also noted lots of discussion about the advanced binding property of DataSourceUpdate Mode, but that does not address this issue.I guess I can do this by checking the state of the row for the binding source. Just seems odd that the event behind the dataset can be triggered and that does not change the dataset.HasChanges property.
View 3 RepliesI have a page that is based on a Master Page. The page has AJAX contolled tabs and on one tab I have 2 panels, each with 1 button. Only 1 panel is visible at a time. I am trying to get the button on the visible panel to be the DefaultButton so that when Enter is pressed the click event is fired off. The issue that I am having is that I get this error no matter what I try: The DefaultButton of 'form1' must be the ID of a control of type IButtonControl.I have tried setting the Default Button property of the panel to the buttons client id and to its unique id.
[Code]...
I have a piece of software with two tabs, inside each tab there are buttons (the user can add the buttons when they want). when tab1 is full tab2 should start to fill. I currently know how many buttons fit on the screen so I just say something like if buttons > 150 then start to populate tab 2 The problem i have now though is if the resolution is changed then a different amount of buttons can be displayed. so if I put my screen to 1280x720 some buttons are left of. I was thinking of detecting the resolution and then using different cases for different resolutions but this seems very inefficient im wondering if there is a different way?
View 5 Repliesi am using VS 2008 and just started to work with XAML and WPF. while opening in page(.xaml) in design mode i'm getting the error like this "Only TrueType fonts are supported and this is not a TrueType font".
View 7 RepliesI know that
Public Incognito As Boolean
is a variable called "Incognito" that is class-wide that is a boolean.My question is that is there a form-wide variable form that can like communicate with different forms. So if a variable in form1 is "True" than, how can you make a variable in form2 turns to "True" too?
I'm having some very weird issues with interfaces right now.
I have a very simple setup. In one of my class, I have a Property implementing a Property from an Interface.
In my class it's like:
Private _oForm As IForm
Public Property Form As IForm Implements IContainer.Form
Set(value As IForm)
[Code]...
I have like dozens of interfaces like this working throughout my project and I can't believe this simple one can't work!
What I would like to do is to have four different buttons (e.g., buttonA, buttonB, buttonC and button D). I wanna give the following instruction to the people: press these buttons in the following order: first buttonA, then buttonB, then buttonC and last buttonD. If they obey this instruction then a picture will be displayed, for instance a happy face. All the other combinations will not activate this picture to be displayed, or in other words, there won't be any consequence. I would also like to save this data using windows note pad e.g., writeline (1, xxxxxx). Is there any chance I will make it?
View 1 RepliesSo im creating a mail bomber here is the code
Imports System.Net.Mail
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs)
[CODE]...
Pretty simble but im trying to make buttons that chage between [URL] and [URL]on the timer code
Dim MyMailMessage As New MailMessage()
MyMailMessage.From = New MailAddress(TextBox1.Text)
MyMailMessage.To.Add(TextBox3.Text)
[CODE]...
how can i use flash buttons in place of the normal vb.net buttons for more powerful interface in our desktop apps.
View 6 RepliesI'm using a dialog form with two buttons and two Radio buttons.I'm oppening this Dialog when a button is clicked on the parent form.My situattion is when the Dialog opens the code in the button event continues to execute, but I only want it to continue to execute only after a button from the dialog form have been clicked
Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
If multipleEXT = 2 Then
Extension.Show()
[code]....
i need to get some buttons to interact with other buttons on screen when i click then, as each indivual button gives a slightly different result.imagine this:[code]....
then i need then to hide different buttons depending on which button was pressed. so say i pressed button 1 then all the buttons showed but alternativly if i had of pressed 2 then say button 5 and 6 disapear.managed to get one way to work but then i would only ever end up with the first results every time.
My VB application is behaving strangley. I have form with fairly large number of controls. I am using case against radio buttons. after curtain number of buttons, it stops responding to more radio buttons.
Then I tried to split controls in to 2 form but now my form.showdialog() too now working properly. It takes new from names but show the old form when running.
i have 4 different handles buttons with code how can i connect them in another "general button" that will make the 4 buttons to work with one click
View 3 RepliesI have 7 Windows forms.The order of the forms is defined within a configuration file.I want to place buttons on each form that will show the next available options.The Next button will move the next form in the list.The Back button will move to the previous form in the list. The Finish button will execute the final piece of code.The Cancel button will exit the application.If the user is on the first form, then there is no Back button.If the user is on the last form, then there is no Next button, but there is a Finish button.
Example 1:
Form1 - Next, Cancel
Form3 - Next, Back, Cancel[code]....
Is there a way for implementers of an interface where a ReadOnly property is defined to make it a complete Read/Write Property ?
Imagine I define an interface to provide a ReadOnly Property (i.e., just a getter for a given value) :
Interface SomeInterface
'the interface only say that implementers must provide a value for reading
ReadOnly Property PublicProperty As String
End Interface
This means implementers must commit to providing a value. But I would like a given implementer to also allow setting that value. In my head, this would mean providing the Property's setter as part of the implementation, doing something like this :
Public Property PublicProperty As String Implements SomeInterface.PublicProperty
Get
Return _myProperty
[code]....
I searched on the forum / Internet for the solution how a PropetryInfo object (of a Public property) can reveal if it has a Private Protected Setter ... it was all in vain .... all help I found was about how to "Set" value of a public property having a Private Setter.I would like to know if I have a PropertyInfo object of a public property, how would I know if its Setter is Non Public?
I tried, in a exception handling block, where I did a GetValue of the PropertyInfo object and then called SetValue by setting the same value back... but to my surprise it worked well and didn error out.
[Code]...
I'm having a few problems converting some code into VB.NET from C#. Most of the translating is done, but I am getting errors when I try to run my code, and I can't figure out what is causing them. Here is the Sub I translated.
Public Sub CreateWidget()
Dim blue As LCDColor
blue.Red = 0
blue.Green = 0
[code]....
The error I receive on this line ("vision.Widgets.CreateWidget(wg1)") reads "In order to evaluate an indexed property, the property must be qualified and the arguments must be explicitly supplied by the user."
start with I was given a program by a friend that was created in Excel 2003 with the help of Visual Basic Editor. He said he used Visual Basic 2003, which he is not 100% sure about. Anyways he used CurLine in the program and when I try to open it in Excel 2007 and then open the Visual Basic Editor and run the program I get the following error:Run-time error '-2147418113 (8000ffff)':Could not get the CurLine property. Unexpected call to method or property access.
View 2 Replies