Set The AutoPopDelay For A Tooltip In A DataGridView Cell?
Aug 26, 2011
I have a dataGridView that I programatically create where I want to set the toolTipText differently for each row by setting the toolTipText in the first column/cell of each row. I know I can do that by doing the following:
This works fine. However, it only displays for the default period of time (5 seconds I believe). I'd like to set the autoPopDelay but can't seem to figure out how. I can't seem to do something like:
I'm aware that the tooltip object can contain an image. I am unable to make an image popup when the mouse hovers over a datagridview cell, since it is not possible to attach a tooltip object to a cell ( myTip.SetToolTip(gridCell, "Hello") generates a compile error)
I am trying to trigger a tool tip when a user enters a cell in a DataGridView and starts editing it. The idea being that I want the user to know to hit the Return key after they are finished typing in a string in the cell. I only want the tool tip to show when the user is editing a cell in columindex 1.
The following below does note seem to be working. Private Sub dataGridView14_CellEnter(ByVal sender As Object, _ ByVal e As DataGridViewCellEventArgs) _ Handles DataGridView14.CellEnter 'Only care about columnIndex 1 If e.ColumnIndex = 1 Then [Code] .....
I'm adding a ToolTip to a ListViewItem. However, the ToolTip only shows up when the user hovers over the first cell in the row to which the ToolTip has been applied.[code]Any idea how I can make the ToolTip show up on a specific cell in a row, or even the entire row?
I am working on implementing cell level error indication in my app and I have it set up to where it shows the error icon correctly and I tried using the datagridview FAQ sample code to show an errortooltip as well. I can watch as I set the errortooltip to have the proper data and display control (in mousemove event), yet the second I finish my mousemove event it fires the mouseleave event and resets my tooltip before the user ever has a chance to see it.
Here's my: ' show and hide the tooltip for error Private Sub ChuteSinglesDataGridView_CellMouseMove(ByVal sender As Object, ByVal e As DataGridViewCellMouseEventArgs) Handles ChuteSinglesDataGridView.CellMouseMove If cellInError.X = e.ColumnIndex AndAlso cellInError.Y = e.RowIndex Then Dim cell As DataGridViewCell = ChuteSinglesDataGridView(e.ColumnIndex, e.RowIndex) [Code] .....
Have this code so that when a checkbox in a column of my datagridview is checked, then the corresponding cell in column 2 (of the same row the check box is in) will turn blue with font color white.
[code]...
I'd also like to add a line so that as well as the cell going blue, the bottom border of the cell disappears, so cellborderstyle = none.
I have a DataGridView with several columns. One column is a TextBox column named "Status". This column can only show one of three values: 'Final', 'Ready', or 'No Reportable'. I want to have some code that would turn the TextBox cell into a ComboBox cell when the user left-clicks on the cell to allow the user to choose one of these three options. When the user clicks elsewhere or the cell loses focus I want the cell to change back to a TextBox cell.
Here is what I have so far, but the code throws an exception indicated below Plus, I don't think the code would remove the combobox when the cell loses focus.
Exception: "Provided cell does not belong to this DataGridView control."
Private Sub dgvCalculatedResults_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles dgvCalculatedResults.MouseDown Dim ht As DataGridView.HitTestInfo = Me.dgvCalculatedResults.HitTest(e.X, e.Y)
I've got a ToolTip showing when hovering over a row in my DataGridView - Works great except for the ToolTip flickering when over a row that displays it.
Is there a way to have one specific row in a DataGridView have a tooltip? So when the user put there mouse over the row, anywhere on the row, the Tooltip would PopUP?Would like to be able to do it at runtime?
Environment: Visual Basic 2005, Windows XPI have the below data grid, I am using. I am trying to show tooltips, when I hover over the "Status" column. Red => MissingGreen => AvailableThe "Status" column is of type: DataGridViewImageColumn. The Images are inserted from "My.resources" I have tried to accomplish it using the below code, but it is not working and believe there might be a better way.
I got a datagrid with lengthier columns and it displays tool tip which is also very lengthier which makes users tough to read data. Is there a way to have multiline Tooltip to get rid of this problem.
I have an unbound data grid view. Every cell that has text will display ToolTipText for that value. I'd like certain cells to have no ToolTip and others to have a ToolTip that provides instruction on what the "X" button is for rather than just having "X" display. If anything, for this particular cell, I'd probably rather have no ToolTip. I've tried setting the ToolTip.Text ="" for the cell immediately after creating the row. On other cells, if I change the underlying text value, I try altering the displayed tip text, but only get the text value for that cell.
How can I remove/modify unwanted ToolTips in my DataGridView?
I have a datagridview that displays text from a cell in a tooltip when text is too long to be viewed in the cell itself. The default length of time, however, is not long enough for me to read all of it.
How can I make the tooltip display for a longer period of time?
In cellEndEdit event I need current cell editedFormatedvalue ( well it is done) now my question is can we get the old value of the cell in this event or have to handle some other event for this means let I have a cell in which current value is abc and when I edit it it become def now I want to get both the values in cell end edit event ( or any else ) but finally I have to perform task on cellendedit
I have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event.
My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?
I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
I have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event. My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
Does anyone know if it's possible to skin the tooltip window so it looks like: Attachment 2448.Instead of the yellow box or the balloon like it does now?
I have a DataGridView where Cell_Validating is being done. I have a Cancel button on my form that allows the user to exit out of the DataGridView changes. The problem is that if a cell was currently flagged as in error, I cannot exit and remove columns from the DataGridView. I get the following error: Operation did not succeed because the program cannot commit or quit a cell value change. Is there a way to cancel the validation once the focus has been removed from the DataGridView? Here is my Cell_Validating
I have just found that if a DataGridView image column's size (height & width - in pixels) is smaller than the image's original size (in my case all images are exactly 180 x 180 pixels) at the time the cell is populated then the image is automatically being converted to a lower resolution I assume to fit the image completely within the size of the cell). How can I stop the automatic scaling of the image?
The image below show the same file displayed twice, both at 60x60 pixels ('Thumbnail' column) and a blowup of the image (PictureBox populated via the CellMouseEnter event) to it's right. You'll notice the resolution of the first blowup is far less the the second. so, what made the difference in the resolution of the blowups is? In the second blowup's case I'd first stretched the image column's width to ~180 pixels and set the row height to match (via the ColumnWidthChanged event) then populated the DataGridView then stretched the image column to 60 pixels (its minimum).
I wish to have a list selection inside a cell of it. like when the cursor is placed in a particular cell and the user hits 'Tab' button in keyboard a list of names & no should be listed and they have to select a particular name, click a particular row in the list form, which in turn needs to fill the cell with the name value.m
There are 3 columns(Count,Item,Price) in datagridview which is bound to a datasource. The count is 1 by default and it should increment by 1 when i click on a button,so the count would be 2 if i click button again
i have a datagridview which i populate of a dB. i have 3 columns on the dgv Account ID, Account Type and Notes. i created an add record button, that enables the user to add records. Account ID is a numerator in the dB, and i would like to automatically add 1 to the numerator. however i can't get the value of the last cell in the last row. for now i am using
Dim RowCount As Integer = Me.grdAccountTypes.RowCount - 1 Dim AccountID As Integer = grdAccountTypes.Item(0, RowCount).Value MessageBox.Show(AccountID)
How to do that no one cell is selected in DataGridView at first moment? (There are some controls in my form before the DataGridView and I don't want that any element of DataGridView is selected when the form is loaded).
I have a datagridview which have a ComboBoxCell, ComboBox is bound to data,, I want to use it as Traditional ComboBox,, I mean I want to display its Item (from display members) on the base of its value.
For example: When I do this Datagridview1.CurrentRow.Cells(4).value = 4 'Cell 4 is the DatagridviewComboBoxCell
It gives me the error that "DatagridviewComboBoxCell.value is not valid",
But I want that this combobox should Select And Display the item which value is 4.