I understand because it has to be ON/OFF it won't go through to any other radio buttons in the group box. Would the best way is to use a hidden radio button that would switch control between the two? There's only two radio buttons i need to tab through, what's the best way to tackle this?
View 7 RepliesI am trying to get 2 group boxes with radio buttons. I would like to check a radio button in group box 1 and have a corresponding radio button in group set 2 get automatically checked based on what I check in group box1. I am trying to do this in VB.
View 4 RepliesI am having trouble coming up with a way to add a selected radio button in a selected group box together.I have 3 group boxes each accessed by a checkbox within each group box there is 3 to 4 radio buttons. I would like to know how to add the selected radio buttons in each group box together and display them in a textbox by clicking a button "calculate". I believe I would have to make a global variable but I dont know where to start.
Private Sub Calculate_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Calculatebtn.Click
Dim answer As String
[code]....
I know this code is wrong but I was just trying to remember the calculate function.Is there a command that uses the selected radio button from the group boxes then I would be able to input that into my calculate button sub?
I am trying to write a program that will have different group boxes,
each representing a question, and each one has radio button choices
I am trying to write the program so that a while loop will go through each group box and check answers of radio button choices
the codes I want to know is the command to access different group boxes
and also how to keep each group box "seperate" enough that i can use same radio button names for all the group boxes...
trying to write a simple form for calculating professor's salaries depending on their degree and position.my problem is that the when i select a check box, the value is not being updated until i select a different radio button. it probably doesn't make much sense here,
Public Class frmMain
Private Sub optLecturer_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles optLecturer.CheckedChanged[code]....
the values being assigned to my salary label are correct, but are not being updated until i select a new radio button. im not entirely sure how to get around this so that the value is updated as soon as i select the check box.here's when the program looks like:
How do i create a group of Radio Buttons? so they all act as one group and i'll be able to get the selected value of the group and not by checking them one by one.
View 14 RepliesSo I have 2 panels and the same number of radio buttons added programatically in each panel. For ex.
RB1 -> Panel1
RB2 -> Panel1
RBo1 -> Panel2
RBo2 -> Panel2
I want to group RB1 and RBo1 and RB2 and RBo2, but when I add the radio buttons to the different panels they group each other. I tried adding RB1 and RBo2 to the same GroupBox but could not achieve the goal either. Is it possible to manually link the radio buttons?
New user here using VB .Net 2008
I seem to be having trouble getting group boxes to appear when I click a radio button.
For example:
If radiobutton1.Checked Then
Groupbox1.Visible = True
Groupbox2.Visible = False
Groupbox3.Visible = False
Groupbox4.Visible = False
End If
This indeed brings up the first radio button however I have other groupboxes underneath which with the same code will not appear when the radio button is checked.
Eg:
If radiobutton2.Checked Then
Groupbox2.Visible = True
Groupbox1.Visible = False
Groupbox3.Visible = False
Groupbox4.Visible = False
End If
The second groupbox does not appear and is directly behind the first groupbox.
The .Top code doesn't seem to be working either.
I would like to have a single subroutine to service a group of radio buttons. I am interested in .CheckedChanged event. Right now, if I bunch them all into one routine, it gets called twice. One for the button that is checked and one for the button that is unchecked.
View 2 RepliesHow can I set a verification that something is checked in a set of radio buttons within a group box? So... groupbox1 has rad1, rad2, rad3. I want to verify that at least one of them is checked. I was going to do a select case, but I can't figure the syntax for the cases... Visual Studio 2008, btw
View 12 RepliesI am attempting to make the transition from VB6 to .net
I have a group box with 6 radio buttons. I want to perform a function when 1 of those buttons are clicked.
In VB6, I would have set up a control array and ran the routine when the array was clicked....but I am struggling with .net here, since there appears to not be control arrays at design time.
Is there 1 even I can use, or do I have to go into each radio button and code the individual event?
I'm creating a windows form application, which contains radio buttons, that when checked and the button is clicked, display a certain image in an image box based on which radio button was checked. I'm having trouble with assigning the certain image to the radio button. Can I use If/ElseIf statements?
View 3 RepliesI have to create a program for customers buying a new care can pick options for that car.The starting cost of the car is $26,000Im having trouble figuring out where to add the starting value. And also, how will i calculate all the options into the total along with the tax.
Public Class Form1
Dim dbltotal As Double
Dim dbltax As Double
[code].....
I have 8 check boxes and 4 radio buttons on a child form. When the User checks a Check Box, they then select a radio button. They will do this for 1 to 8 of the check boxes. The only way I could think of to keep track of this is create 8 panels with 4 unique radio buttons in each. Then I would set the visibility to each one accordingly. This method has other logistical errors than just trying to get the design view worked out.
I was wondering if there was a way to just use the radio buttons. I thought I could set a boolean variable to keep track of each Check Box's Radio buttons. Or an integer variable. For instance, if Check Box 1 is checked and Radio Button 1 is checked then myVariable's value is 1 or whatever. Then when I actually run the app, I can check the value of the variable do do what I need. Does this sounds plausible?
I am trying to change the button colors, in different group boxes,(Buttons and group boxes are in the same form). How can I change it?
View 1 RepliesI am currently trying to allocate a number of group boxes dynamically. Previously (in other languages) when I have carried out something like this I have used the '&' to substitute the contents of the variable direct into the code I.E
For I = 1 to 20
Groupboxname = "GroupBox"+I
Weatherstates.&groupbox.controlls.add(obutton)
next
This would then have the result of creating a button in all the group boxes, however this does not appear to work in VB .net 2010
I have looked at Directcast, but i am a even more confused. Is there a simple way to substitute the contents of a variable into the code ?
I am asked to modify Radio Buttons and Boxes in the proper way using a Display Button from an existing project.
View 1 RepliesWant to make a movie rental program first part is for dvd's the other form is for blu rays (for blu-ray the price of rental is $5.00)THis is what im thinking about doing on the dvd one.1. first it lets you select the movies you want new releases are $3.25 and the rest are $1.25 *here i want to use check boxes for the new release and radio buttons for the rest of the moives *note: have to use one type of decision structure (if, if...else...or select cases) 2. As you select the moives it display the amount of movies selected in a label
3. now you click the rent button then
4. please type in your 16 numeric numbers of your debit card (use a input box here) and if it is a debit card and its 16 numbers long display = enter 4 number password or 4 digit pin number
5. if it is not display a message saying it must be 16 numbers long and a debit card or numeric use error cathing and input validation
6. then let the user enter the 4 number pin for the debit card
7. if the pin is 4 numbers then display the total in a list box display total and the due date of the movie (don't know how im going to display due dates) Note two other things i must use a procedure or a function and passing of arguments by reference or by value in procedure or fuction.I got the part on how two diplay the total but dont know where to use the decision sturctured or the repetition structures the
use rof procedure or funciton or passing arguments by ref or by val in my procedures or functions
I need to create a form with radio buttons, text boxes, labels, etc.. This information needs to be pulled from a database. For instance, I have a form that displays information that needs to be inputed to a database, based on what test is being done for a specific product. Each product requires different tests. So each product may or may not have the same information that needs to be inputed..
What I have done is made a database and filled a table with each product and what tests apply. I then call that database after the product has been selected for the tests. It will then fill an array for that products information for what texts boxes and labels need to be shown. I wanna take this further and have it create a form through code and align all the controls to specific spots so that it will look nice. For example I wouldn't wanna create a control and have it be cut out of the form, or have other controls overlapping others.
[Code]...
I have a group box with 4 radio buttons and another groupbox with 4 text boxes.how do i write a short code to clear all text boxes and radio buttons within each box.i have written code the long way, ie..[code]but i think there is and easier way but i cannot find the statement.
View 1 RepliesIs there a better way to make a form with multiple buttons opening different things than having a form that has lots group boxes for each tab. So in the begining each box will be invisible and when you click the button the corresponding group box will become visible. Is there any other way?It will be like a background image and it'll have buttons that will mask it with invisible buttons. when the button is clicked it will open the corresponding group box.
View 5 RepliesI'm using a dialog form with two buttons and two Radio buttons.I'm oppening this Dialog when a button is clicked on the parent form.My situattion is when the Dialog opens the code in the button event continues to execute, but I only want it to continue to execute only after a button from the dialog form have been clicked
Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
If multipleEXT = 2 Then
Extension.Show()
[code]....
In my program I want to have two different 'modes', each has its own form. My main form in the program is 'Normal Mode', but there is also a mode called 'Basic Mode' which has a smaller form. How can I switch between the two forms (using buttons) by closing the other without my program closing on me?
View 6 Replieshow would i switch the mouse buttons?
View 4 RepliesI need the picture boxes to switch threw the images and here is my code. Im using the imagelist to hold my 3 images so far (0-2)
[Code]...
My VB application is behaving strangley. I have form with fairly large number of controls. I am using case against radio buttons. after curtain number of buttons, it stops responding to more radio buttons.
Then I tried to split controls in to 2 form but now my form.showdialog() too now working properly. It takes new from names but show the old form when running.
I have a Form which has several questions - each question is answered (bythe user) by choosing between 2 options - each option represented by a Radio Button. I have six questions and hence 12 radio buttons on my page but all of them seem to belong to the same group - i.e., the user can select only one of the 12 buttons whereas I want the user to be able to select one from every pair of radio buttons.
View 1 RepliesI have a radio button group with the name of EmpStatus.I inserted the result of the radio button selection to the sql table with this code:[code]If any body knows what would be the code to be able to update the table on profile edit save button click
View 5 RepliesHow do i checked that within a GroupBox 1 radio button has been selected? I want to provide the user with a message box telling them they have not made a selection from one of the 12 radiobuttons within the group box?
View 3 RepliesI would like to make a groupbox readonly by using a radio button, how can i make the readonly command an expression as i have this so far If radioButton1.Checked Then groupBox = ReadOnly is there a namespace that needs to precede ReadOnly?If you're not living on the edge, you're taking up too much room
View 3 Replies