The Question sound like this.Assume the theater keep 20% of its box office receipts. Use the Following test data to determine if the Application is calculating properly :
[Code]...
I am coding a loan payment application and when I run the application the loan calculations are incorrect.[code]...
View 1 RepliesWhen I install .net Frame work 2.0 I had this Error when the setup writing system register values RegSvcs.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have running an blank application (blank forum) and i running it in the VS 2005 IDE iget this error: windowsapplicatin1.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have a program in setup package that i made from 1 week . i have install this program and when i want to run it i had this problem
[Code]...
My project Developed under Vb2008 and Distrubution package Created by 'Avanced Installer 8.1.1' runs fine in some PCs. But in a specific PC, it produces ApplicationError as 'The application failed to initialize properly (0X0000135). Click on OK to terminate the application." The PC is a standalone Pentium-4 PC with OS windows XP (SP2).
View 2 Repliesi have a program but when i want to run it in VS IDE or out of it i had this Error Application Error: The application failed to initialize properly (0xc000007b). Click on OK to terminate the application.I had made the program by basic language on VS 2005 . net
View 1 RepliesI have to calculate values of several equations in an application. For example, one these equations could be:
d = a + b*z + c*z (this is what is being displayed to the user, assume that 'a', 'b' and 'c' are provided as textboxes, assume that z is a hardcoded value for now)
Now, the user could enter a=1.5, b= -0.5 and c = -0.6 (or even 'a' could be negative). So, I just tried a sample code for simple values but to no avail...
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As EventArgs) Handles Button1.Click
Dim val1, val2, val3_calculated, first, second As String
first = "8"
second = "3"
Dim arr(10) As String
[Code] .....
Error:
But it throws an error saying that I am not using any databind control.
Concerns:
First of all, is it necessary to use this "eval" operator in here? Is there any way to keep "-0.5" with the sign in asp.net using vb?
I am new to working with SQL databases (and databases in general) so I do not have a lot of experience with how queries work and how I can practice them. When I was first learning xml and XPath, I found XPath Visualizer incredibly helpful after someone on stack overflow mentioned it to me.Due to this, I am wondering if a similar tool exists for SQL databases?Basically a tool that will allow me to connect to a database,enter queries and see somehow what the results would be like.
I have looked online a bit, however I have found relatively few options in terms of any utility that would do what I want, and that looks reliable.I will ultimately be writing an application to interact with an SQL 2008 server in vb.net, however for now I am just experimenting so I will know what I am doing when I actually want to create my application.So far I have managed to connect to the database using an OLE DB connection, but I am now looking for a way to experiement with queries without just querying and figuring out a way to interpret the results in my program. Basically I want to be able to remove the programming aspect of things so I can experiment with queries without needing to question anything in my code that is unrelated to the specific query.
I am making a small tool that require some calculation. I am using hashtable to store values that I need to calculate. This tool continuously extract data on specific time interval(30 seconds) from webpage and add those data into the hashtable. Now the problem is I need to store the previous extraction data and when new extraction occurs, I need to deduct the previous data from new data.
[Code]...
On first run it shows the result of Data3 = 100 which is currect. But on second run I need to redefine the value of Data2 = Data1 . So I need a result of Data3 = 0 on second run. This may not be the proper way to do this sort of operation. I have also tried using listbox, listview and even textfile to store the Data2 and recall that on second run. But could not make it possible.
This is the last phase of my tool and I am stuck with it.
I am making a small tool that require some calculation. I am using hashtable to store values that I need to calculate. This tool continuously extract data on specific time interval(30 seconds) from webpage and add those data into the hashtable. Now the problem is I need to store the previous extraction data and when new extraction occurs, I need to deduct the previous data from new data.Here is the process I am currently following:
Dim MyTable as New Hashtable
MyTable.Add("Data1","200")
MyTable.Add("Data2","100")
[code].....
I am making a small tool that require some calculation. I am using hashtable to store values that I need to calculate. This tool continuously extract data on specific time interval(30 seconds) from webpage and add those data into the hashtable. Now the problem is I need to store the previous extraction data and when new extraction occurs, I need to deduct the previous data from new data.Here is the process I am currently following:
HTML
Dim MyTable as New Hashtable
MyTable.Add("Data1","200")
MyTable.Add("Data2","100")
[code]....
On first run it shows the result of Data3 = 100 which is currect. But on second run I need to redefine the value of Data2 = Data1 . So I need a result of Data3 = 0 on second run. This may not be the proper way to do this sort of operation. I have also tried using listbox, listview and even textfile to store the Data2 and recall that on second run.
i made a program and used a program called Advanced Installer to put all the files from the build folder into one big install exe file to send to people but one they've installed it and go to open it they get an error saying: "the application has failed to initialize properly (0xc000135). Click on OK to terminate the application" What does this mean? do i need to have the NET framework on the machine its being run on?
View 6 Repliesi will just use Environment.Exit(code) to exit an application. (usually through a button click) , but i would like to know is it the proper way to exit , ie, releasing memory etc etc...
View 3 Repliesim trying to find a better way to end the application im working on right now programatically, sometimes a user simple wants to end it all and since in the properties of my project the program is set to only end after all forms have been closed, (oddly enough i close all forms and it still is executing so i use dispose method and then end) what would be the best way to end the application and free pc memory for everything attached to it? i use:
form1.dispose()
form2.dispose()
form3.dispose()
me.dispose()
End
as ive readed online, end simply stops the app and nothing else, which makes me think, does its data still persists in the ram? i want to clear everything and not leave useless resources anywhere.
I work with a database, the db is on the <project_folder>database folder.
If want to open the database, Application.StartupPath returns[code]...
So I have to compile the project to an .exe to make tests.
I am looking for some advise, I currently have a VB.Net application using .NET frameworks 2 written in VS 2005. One of my clients wants to know if the application works with Unicode, at the moment I have not tested this and what I am looking for is some advise on how to do this e.g.
1) Does anything need to be added to my project e.g. code to allow this functionality. 2) Is there a way that I can easily check to see if my application can work with Unicode? 3) Advise on how other people test for this? I know it is a bit general, but as I have not done this before I am obviously trying to build my knowledge and get it right with regards to testing etc.
I am looking for some advise, I currently have a VB.Net application using .NET frameworks 2 written in VS 2005. One of my clients wants to know if the application works with Unicode, at the moment I have not tested this and what I am looking for is some advise on how to do this e.g.
1) Does anything need to be added to my project e.g. code to allow this functionality.
2) Is there a way that I can easily check to see if my application can work with Unicode?
3) Advise on how other people test for this?
I know it is a bit general, but as I have not done this before I am obviously trying to build my knowledge and get it right with regards to testing etc.
It apparently came to my mind to test my eyeBlink using an application. Through the use of my webcam, I want to perform some commands. For eg: When I blink my eye, it should open notepad. How can that be done?
View 1 RepliesI am trying to install my vb.net application on the other system.I have installed the whole vs on this system too but still getting the error "Application failed to initialize properly".I have .net2.0.This appl can be installed on the system where it is developed.
View 3 RepliesI have an application developed in VS2008 VB.net. It is a numberpad with buttons for 0 - 9.When published and installed on my local PC, everything works as expected. I open a browser window, and am able to click a number-button and have the corrosponding number sent to the active window location. When installed on other PC's, the numbers sent to the active window location are repeated many many times. If you click the "3" button, then anywhere from 10 to 50 "3"s are sent to the screen.All PC's have Windows XP Professional, Version 2002, Service Pack 3.The only differences I can detect are the many many .NET frameworks installed on my computer and not on others.[code]
View 1 Replieshow to properly publish my application to the Internet, so that i can upload the new version, and upon opening, the application will replace the existing one with the new version?
My.Settings("Notepad") = TextBox2.Text
My.Settings("Notepad") = TextBox2.Text
When i run the application, that pops up in yellow with an error message, how do i fix it. I'm looking at creating an IRC client that's embedded in my application. If you are able to create it even, you will be given credits, and are able to do whatever you like with it (I'll be determining its size and positioning inside my App of course) You need to be able to CHOOSE your Channel.. the client will be connecting to the Swiftkit IRC server.
i am getting the error The application failed to Initialize properly (oxc000007b) when I use departmental Script Tools?
View 1 RepliesI have an application that runs perfectly on XP. When I run in on Win 7, it works perfectly when I run it in the IDE but when I deploy it, the application starts OK but some of the functions don't work as they should. I know it could be anything but does anything stand out?
View 1 Repliessometimes my application will remain running after I close it. If I check the task manager, the process is still running. Is there anything specific that could cause this, or any way I can make sure to close the program completely?
View 22 RepliesI am currently going through Murachs Beggining .net programming book. I am trying to implement an application for an exercise at the end of chapter 5. The application specification is as follows.
[Code]...
I am making a setup application and I need to know how to properly add a registry key so the application startup with windows. I have made what you can see on the image but I get an error when my PC restarts.This setup is nothing special I just need to make the registry key properly.
View 10 RepliesI am observing some errors, resulting in invisible application and disappeared icon. I am starting it from HKCUSoftwareMicrosoftWindowsCurrentVersionRun.[code]...
View 1 RepliesI'd like to create a simple application to determine the writing speed. In this application I want to view a line of text (may be more than one line) to the user to write it. And I want to select (higlight) the character the user pressed in my line and to move like a cursor to the next character (or to put underline under the current charater). How can I do that? and what is the object or component i must use to insert the text. Finally, if I want to make it multiple lines how to determine the enter key pressed by the user and how to move the cursor to the next line?
View 2 RepliesCurrently I'm writing a VB.NET app and it's getting big, resulting in its become very slow.Is there any application (or plug in) that can test the performance in seconds?I mean, when I click a button and it displays a product, I want to know exactly how long it is gonna take.
View 3 Repliesmy friend is currently development an application using SOA Architecture, He sent me a picture with a lot of layers (10 almost) and he is worried about performance issues, the application is development on VB.Net 2.0 & 3.5 (some libs).
View 3 RepliesI am developing an application which will be used to scan the barcode from a particular document, as i am just developing who i will get know that barcode scanning is working i dont have device at the moment
View 2 Replies