Application Failed To Initialize Properly

Sep 7, 2010

I am trying to install my application on the other system.I have installed the whole vs on this system too but still getting the error "Application failed to initialize properly".I have .net2.0.This appl can be installed on the system where it is developed.


The Application Failed To Initialize Properly

Mar 11, 2010

i am getting the error The application failed to Initialize properly (oxc000007b) when I use departmental Script Tools?

View 1 Replies View Related

Deployable Shutdown - Application Failed To Initialize Properly

May 18, 2010

I'm trying to create an app with a GUI to run at a specified time (handled by Altiris) to run a locally stored program to give the user a specified amount of time to close the task, otherwise the computer is forced to log off destroying any unsaved information. The code I have looks to work, when built it shows no errors, but when I pull the executable (using VS 2010 Express) after the time expires I get a Windows Application Error for the program stating:
The Application failed to initialize properly (0xc0000142).

The code I'm running is:
Imports System
Imports System.Timers
Public Class Form1
Private Shared Shutdowntimer As System.Timers.Timer
Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
[Code] .....

View 6 Replies View Related

Error Application Failed To Initialize Properly (0xc000007b) Click OK To Terminate The Application

Aug 13, 2009

When I install .net Frame work 2.0 I had this Error when the setup writing system register values RegSvcs.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have running an blank application (blank forum)  and i running it in the VS 2005 IDE iget this error: windowsapplicatin1.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have a program in setup package that i made from 1 week . i have install this program and when i want to run it i had this problem


View 2 Replies View Related

Application Error - 'The Application Failed To Initialize Properly (0X0000135)

Apr 13, 2011

My project Developed under Vb2008 and Distrubution package Created by 'Avanced Installer 8.1.1' runs fine in some PCs. But in a specific PC, it produces ApplicationError as 'The application failed to initialize properly (0X0000135). Click on OK to terminate the application." The PC is a standalone Pentium-4 PC with OS windows XP (SP2).

View 2 Replies View Related

Application Error: The Application Failed To Initialize Properly (0xc000007b)?

Aug 9, 2009

i have a program but when i want to run it in VS IDE or out of it i had this Error Application Error: The application failed to initialize properly (0xc000007b). Click on OK to terminate the application.I had made the program by basic language on VS 2005 . net

View 1 Replies View Related

Get An Error Saying: "the Application Has Failed To Initialize Properly (0xc000135). Click On OK To Terminate The Application" ?

Feb 22, 2009

i made a program and used a program called Advanced Installer to put all the files from the build folder into one big install exe file to send to people but one they've installed it and go to open it they get an error saying: "the application has failed to initialize properly (0xc000135). Click on OK to terminate the application" What does this mean? do i need to have the NET framework on the machine its being run on?

View 6 Replies View Related

Customizing The Default "The Application Failed To Initialize Properly (0x00000135)" Message

Oct 9, 2010

When the .net framework cannot be found, the following message is displayed:

"The application failed to initialize properly (0x00000135)"

Is there a way to make it a tiny bit more specific (instead of writing a wrapper in another language), eg. by telling the user about the .Net fx?

View 1 Replies View Related

VS 2008 Error "application Failed To Initialize Properly (0x0000135)" On Open Exe

Dec 30, 2009

why i can open my .exe project and when i send to my friend when he press on the exe it shows this the application failed to initialize properly (0x0000135) you dont know why ? ...

View 2 Replies View Related

.Net Application Failed To Initialize

Apr 10, 2006

.Net application failed to initialize

View 7 Replies View Related

Message :'Application Failed To Initialize Property Ox700000000000000 ..... Click Ok To Terminate Application'

Apr 11, 2011

When i click on my installed application icon on the desktop,i receive the message : 'Application failed ti initialize property ox700000000000000 ..... click ok to terminate application'.

View 2 Replies View Related

Error - The Application Failed To Initialize

Feb 2, 2009

So i've coded a simple vb project in MS VB 2008. I then copied the contents of the 'bin/release' folder, and tried running the program on another machine. I'm getting 'the application failed to initialize' error. I'm assuming this is because i'm missing certain files, dll's or something. Or should I have copied the obj/release folder?

View 2 Replies View Related

Configuration System Failed To Initialize In Window Application

May 24, 2012

i am using databse connection model but can't get actual result because of this error , i don't know why this occurring ,i have use the windows application with app.config file, i paste xml code.



View 2 Replies View Related

Failed To Initialize COM Object

Aug 21, 2011

I have created a web application in ASP.NET using VB.NET as code behind file. I am using a COM object of ProvideX.Script class to connect to Sage MAS90 ERP. Everything was working fine in visual studio 2010. Now when I moved to the deployment phase, the problem gets started. I deployed my application in Windows Server 2008 in IIS7. When I run the application I get the following exception.[code]...

View 2 Replies View Related

Configuration System Failed To Initialize

Dec 9, 2005

When i try to run my app I get this exception "Configuration system failed to initialize"I recently added a datascource to the app and am assuming that something has gone wrong there but it was all working ok and then this error just started.I assume it's a problem with my appconfig file which i'll post here I cant see anything wrong with it but.!!I've tried deleting the ConnectionString Section but nothing helps and i cant run my app at


View 1 Replies View Related

Configuration System Failed To Initialize In .NET Exe?

Nov 24, 2009

I have an .NET winforms application(A). I am calling another .NET exe(B) file from the winforms application. When executes, it throws the following error.

I haven't kept any configuration file for the second exe file(B).

"Configuration system failed to initialize"

View 1 Replies View Related

Failed To Initialize Activation Context

Jan 17, 2010

I have made some custom .dll's or components and then I downloaded custom webkit component and it didn't work perfectly(I mean that I always get some error code with this error: An error occurred creating the form. See Exception.InnerException for details.The error is: Failed to initialize activation context. When I try to debug the project). And if I have made a new project, and make a component with user control, and I haven't saved it yet, it will work fine, but until I save it then it will give me a designer error.

View 1 Replies View Related

DB/Reporting :: Configuration System Failed To Initialize

May 14, 2008

Have you tried configuring ASP.Net Membership together with Enterprise Library DAAB? When I run my application it throws the following exception:
"Configuration system failed to initialize"
It seems that it encounters a problem that normally don't occur when I setup my configuration file.

View 1 Replies View Related

Error - Configuration System Failed To Initialize

Sep 17, 2010

I have a VS Solution with several projects. I want to set a specific project to the start project in Debug mode. Everything seems to run fine as I set breakpoints on the initial Form and several initialization procedures.  At one point however, I get this error which is not an issue when I compile and run the release version.

Here is an illustration of the Exception. Unrecognized configuration section configuration. (C:...path...File.vshost.exe.config line 25)  The config file is listed below an the jit debugging = true statement is on line 25


View 4 Replies View Related

Error: Configuration System Failed To Initialize

Jun 8, 2009

What is wrong with my app.config. Started getting the error when I added the log4net and configsections.

Error: Configuration System Failed to Initialize

Line of code



View 2 Replies View Related

IDE :: Assembly Manifest Error - App Failed To Initialize

Apr 10, 2009

I've been having an error with my Visual Studio 2008 with .net framework 3.5 Sp1. I am creating a project, and it would run properly until after a while when I try debugging the project I would get a error message that says:
"Error while trying to run project: Could not load file or assembly 'Name_of_Project' or one of its dependencies. The module was expected to contain an assembly manifest."

Also the .exe file that it creates in the bindebug folder gives and error that says:
"The application failed to initialize properly (0xc000007b). Click OK to terminate the application."
These errors after a format of the machine would disappear for awhile but not indefinitely.

View 4 Replies View Related

[vb2008] Configuration System Failed To Initialize?

Apr 13, 2011

I am the author of a freeware that have been hundreds of downloads without problems... and only ONE user reports to me the error in object.Since the exception is handled, tanks to his report I can realize that the error is generated when is read this code line:

If My.Settings.Opened = True then

Now the question is: why a single PC over hundreds have problems gaining access to My.Settings?His PC has installed XP Home Edition SP3, my program is compliled for Framework2.0.

View 4 Replies View Related

VS Form Designer Failed To Load Properly

Jul 31, 2009

This problem seams to be in other forms without any concrete solutions. I figured id post it here since i am running into the same problem and i am sure you have at well at some point (if not then you will The problem is this error is appearing when i open a form in designer mode.


View 2 Replies View Related

IDE :: Package 'Microsoft.VisualStudio.Xaml' Has Failed To Load Properly?

Jun 19, 2008

When I start VS2008Prof I get a Package Load Failure "Package 'Microsoft.VisualStudio.Xaml' has failed to load properly". Repairing VS and resetting ('devenv /resetsettings') it did not help.

View 3 Replies View Related

Interface And Graphics :: VS Form Designer Failed To Load Properly?

Jul 31, 2009

this error is appearing when i open a form in designer mode. A picture showing what happens to VS when this error occurs.The error code is:One or more errors encountered while loading the designer. The errors are listed below. Some errors can be fixed by rebuilding your project, while others may require code changes.Unable to cast object of type 'System.Diagnostics.DebuggerNonUserCodeAttribute' to type 'System.Attribute'.

View 1 Replies View Related

VS 2008 Strange Message About A Package That Failed To Load Properly

Aug 10, 2011

Suddenly today , when I started my computer and went on to open the VS , I got this strange message: Do you know what it might mean ? I didn't installed anything on my PC for a long time, so I can't think of anything ...

View 8 Replies View Related

Getting Runtime Error 3447 - Jet VBA File (VBAJET.dll For 16-bit Versions Or VBAJET32 For 32-bit Versions) Failed To Initialize When Called

Aug 19, 2010

To the board: Lately I've been getting Runtime error 3447 ("The Jet VBA file (VBAJET.dll for 16-bit versions, or VBAJET32 for 32-bit versions) failed to initialize when called. Try reinstalling the application that returned the error") when attempting to open a certain program (not one that I designed, just downloaded and installed). I installed this program in January 2009, but this error began happening only this past July. someone else to information about the files vbajet32.dll and expsrv.dll. One site said that the problem was probably caused by the file expsrv.dll being absent, but I checked my System32 folder, and it's there. As far as I can tell, it has always been there (the computer was made in 2008, and as I said the program had always worked before). Vbajet32.dll is also there. I tried uninstalling and reinstalling the program, but error 3447 still occurs. I also tried uninstalling the program and installing an older version, but 3447 is still there.

I tried replacing expsrv.dll, thinking it might have been corrupt, but that didn't help, and I cannot register that dll anyway. I can't figure this thing out. Both of the files are there, and I didn't change any settings or anything anywhere between last January and this July. By the way, I am on Vista.

View 1 Replies View Related

Cant Get Rid Of "Configuration System Failed To Initialize" Exception?

Aug 10, 2010

Due to some bug I had deleted the whole bin folder *with* config files, yesterday but after doing so it was working fine but today the program always throws this exception:onfiguration system failed to initialize. Even when I have recreated the configuration files. The exception is thrown as soon as application starts.

View 1 Replies View Related

Connection Attempt Failed Because The Connected Party Did Not Properly Respond After A Period Of Time?

Jan 12, 2010

I'm trying to connect a remote mysql database. I'm doing it from a 2005 application with a connector What's happening is, suppose if I try to connect thrice it connects twice and once throwing an exception that says A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. there's nothing wrong with the code, otherwise it would never have connected

View 4 Replies View Related

IDE :: Debugging - Declarations Fails To Initialize After Application.Restart

Apr 14, 2009

In my code the application will restart using the Application.Restart statement from another form named frmDatabase.

The application seems to restart while debugging but yet the dataset, tables etc which is declared right below the class declaration for the startup form seems to fail initializing when the restart is done.

Compiling and running the application works like a charm and there is no error like this when running the executeable.

I also Inserted a breakpoint in the Form_Load event and the debugger seems to skip all the statements when the application is restarted all the way down to where the exception occurs.


Public Class frmMain
Public objConnection As New OleDbConnection(strConnectionString)
Public objDataSet As New DataSet
Public objCommand As New OleDbCommand
Public objDataAdapter As New OleDbDataAdapter(objCommand)

View 3 Replies View Related

Application Has Failed To Start Because The Application Configuration Is Incorrect?

Apr 22, 2008

I have seen a similar post under C++ but after reading that post and many others I have been unable to find a solution for VB VS2008.I have just ported one solution withseven projects from VS2005to VS2008. All seemed fine at compile time but when I attempted to step into the code in the debugger I received the following error:

View 1 Replies View Related

Exit An Application Properly?

Nov 25, 2010

i will just use Environment.Exit(code) to exit an application. (usually through a button click) , but i would like to know is it the proper way to exit , ie, releasing memory etc etc...

View 3 Replies View Related

Properly End The Whole Application Programatically?

Oct 28, 2011

im trying to find a better way to end the application im working on right now programatically, sometimes a user simple wants to end it all and since in the properties of my project the program is set to only end after all forms have been closed, (oddly enough i close all forms and it still is executing so i use dispose method and then end) what would be the best way to end the application and free pc memory for everything attached to it? i use:


as ive readed online, end simply stops the app and nothing else, which makes me think, does its data still persists in the ram? i want to clear everything and not leave useless resources anywhere.

View 3 Replies View Related

Deployment :: Application Works Properly On PC But Not Others

Mar 8, 2010

I have an application developed in VS2008 It is a numberpad with buttons for 0 - 9.When published and installed on my local PC, everything works as expected. I open a browser window, and am able to click a number-button and have the corrosponding number sent to the active window location. When installed on other PC's, the numbers sent to the active window location are repeated many many times. If you click the "3" button, then anywhere from 10 to 50 "3"s are sent to the screen.All PC's have Windows XP Professional, Version 2002, Service Pack 3.The only differences I can detect are the many many .NET frameworks installed on my computer and not on others.[code]

View 1 Replies View Related

Properly Publish An Application To The Internet?

Jun 11, 2010

how to properly publish my application to the Internet, so that i can upload the new version, and upon opening, the application will replace the existing one with the new version?

My.Settings("Notepad") = TextBox2.Text
My.Settings("Notepad") = TextBox2.Text

When i run the application, that pops up in yellow with an error message, how do i fix it. I'm looking at creating an IRC client that's embedded in my application. If you are able to create it even, you will be given credits, and are able to do whatever you like with it (I'll be determining its size and positioning inside my App of course) You need to be able to CHOOSE your Channel.. the client will be connecting to the Swiftkit IRC server.

View 2 Replies View Related

VS 2005 Application Doesn't Run Properly On Win 7

Jul 22, 2011

I have an application that runs perfectly on XP. When I run in on Win 7, it works perfectly when I run it in the IDE but when I deploy it, the application starts OK but some of the functions don't work as they should. I know it could be anything but does anything stand out?

View 1 Replies View Related

VS 2008 : Application Will Not Properly Close?

Oct 19, 2009

sometimes my application will remain running after I close it. If I check the task manager, the process is still running. Is there anything specific that could cause this, or any way I can make sure to close the program completely?

View 22 Replies View Related

Properly Add A Registry Key So The Application Startup With Windows?

Feb 21, 2011

I am making a setup application and I need to know how to properly add a registry key so the application startup with windows. I have made what you can see on the image but I get an error when my PC restarts.This setup is nothing special I just need to make the registry key properly.

View 10 Replies View Related

Run Application Properly By Logon In Tray Mode?

Nov 18, 2008

I am observing some errors, resulting in invisible application and disappeared icon. I am starting it from HKCUSoftwareMicrosoftWindowsCurrentVersionRun.[code]...

View 1 Replies View Related

Application Error-startup Failed

Feb 23, 2009

I have completed a VB.NET app .its working very fine from vs2005. Now I am trying to publishing app. My problem is that i got an error when i tried to run exe.I was using five VB6 dll in my app.1)


View 1 Replies View Related

Copyrights 2005-15, All rights reserved