IDE :: Debugging - Declarations Fails To Initialize After Application.Restart
Apr 14, 2009
In my code the application will restart using the Application.Restart statement from another form named frmDatabase.
The application seems to restart while debugging but yet the dataset, tables etc which is declared right below the class declaration for the startup form seems to fail initializing when the restart is done.
Compiling and running the application works like a charm and there is no error like this when running the executeable.
I also Inserted a breakpoint in the Form_Load event and the debugger seems to skip all the statements when the application is restarted all the way down to where the exception occurs.
Declarations:
Public Class frmMain
Public objConnection As New OleDbConnection(strConnectionString)
Public objDataSet As New DataSet
Public objCommand As New OleDbCommand
Public objDataAdapter As New OleDbDataAdapter(objCommand)
View 3 Replies
ADVERTISEMENT
May 1, 2009
I'm having to write a reporting application that gets information from some Interbase servers and it also has to work on Vista as well as XP, I'm using to connect Borlands Data Provider.[code]My Issue is that debugging on my xp Machine the dataset gets filled, debugging on my vista box it fails ("Interbase provider initialization failed"), my initial thought was that this could be UAC related but I've compiled the application and 'ran as admin' and still same issue. (by the way it failes on the line Dim da as BdpDataAdapter...)
View 1 Replies
Jun 15, 2010
It happens quite frequently, more times per day, that with Visual Studio 2010, during the debugging, when I used Immediate commands like:I receive the following error:
'NamedVariable' is not declared. It
may be inaccessible due to its
protection level.
View 8 Replies
Aug 13, 2009
When I install .net Frame work 2.0 I had this Error when the setup writing system register values RegSvcs.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have running an blank application (blank forum) and i running it in the VS 2005 IDE iget this error: windowsapplicatin1.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have a program in setup package that i made from 1 week . i have install this program and when i want to run it i had this problem
[Code]...
View 2 Replies
Apr 11, 2011
When i click on my installed VB.net application icon on the desktop,i receive the message : 'Application failed ti initialize property ox700000000000000 ..... click ok to terminate application'.
View 2 Replies
Apr 13, 2011
My project Developed under Vb2008 and Distrubution package Created by 'Avanced Installer 8.1.1' runs fine in some PCs. But in a specific PC, it produces ApplicationError as 'The application failed to initialize properly (0X0000135). Click on OK to terminate the application." The PC is a standalone Pentium-4 PC with OS windows XP (SP2).
View 2 Replies
Aug 9, 2009
i have a program but when i want to run it in VS IDE or out of it i had this Error Application Error: The application failed to initialize properly (0xc000007b). Click on OK to terminate the application.I had made the program by basic language on VS 2005 . net
View 1 Replies
Sep 14, 2009
I dont know use application.restart() in vb.net i dont found this command
View 2 Replies
Apr 13, 2010
I'm using my.settings to store different communication parameters. After changing parameters, for several reasons, it's easier to restart the application then to re-initialize all objects/variables/etc using program code.
When I change my.settings and use save to save them. When I quit the application and manually start it again, the newly saved settings are used.
When I use either .restart, or application.exit in combination with process.start. The application will use the old values for my.settings.
If I read up on .restart there's a remark mentioning that it will restart the application using the initially used settings.
Before restarting the application, I manually checked if the new settings were really save to the user.config file, and they were.
My question: Is there a way to restart the application using either .restart, or application.exit in combination with process.start which will use the newly saved my.settings values?
View 8 Replies
Apr 22, 2012
Is it possible to restart your application with a button press?
View 1 Replies
Jul 25, 2011
I've deployed an application inside a corporate network and I want the update process to require less attention from users. Giving them a choice to update is not a porogative.I've written code to detect when new updates are available automatically rather than letting ClickOnce check on application start. I'm wondering if its necessary to restart the app after the update has completed. Currently I invoke at the end of my update script:Application.Restart()
But what if (to make the update process more transparent for the user), I performed a 'silent' update in the background on a separate thread, and then displayed an icon prompting the user to restart the app to apply the changes? Would it work this way?
Furthermore, if I ran my custom InstallUpdate() process on a timer, say every 2 hours, would ClickOnce be happy to continue to update for every new version that was released even thought the user has not restarted (and I'm expecting the updates only to apply once the user restarts the app)?
View 2 Replies
Jan 27, 2010
Is it possible to restart a VB.NET application, but with different command line arguments than it originally had? Here is the challenge. I want to write a single instance application. If the second instance has the same CL args as the first, then the built-in behavior is fine (second instance never opens, e.BringToForeground=True brings 1st instance to foreground, everything is great). But if the second instance has different CL args, then I would like the first instance to close and the second instance to start. However, once you mark a VB.NET app as "single instance only", it appears that you can never get the second instance. I think: OK, fine, I can just restart my first instance from the StartupNextInstance event. But how do I use the new command line arguments from the second instance? The Restart() method does not take CL args that I can see.
View 5 Replies
Sep 11, 2011
I have a picturebox and I want when i change the image on picturebox and restart application it be the same we choose....
So: I want my application save image of picturebox ....
View 4 Replies
Apr 14, 2012
I'm using my.settings to save the load time of the solution. When my.settings.load_time value is changed and use my.settings.load_time.save() to save them. When I quit the application and manually start it again, the newly saved settings are used.When I use either application.restart. The application will use the old values for my.settings.Is there a way to restart the application using either application.restart which will use the newly saved my.settings values?
View 6 Replies
Sep 9, 2010
I was trying to use application.restart() to restart my application after downloading a new update. It seems to run into the problem where it is trying to start the new application before the original is closed so it errors out and never starts. After reading through some threads here I determined the better way to handle it would be
application.exit() process.start(application.executablepath) This didn't work and gave me what seems to be the same problem. I would also like to note this works fine when running the application through visual studios, it is only when I try to run this independent of VS2010 that the application never restarts.
View 4 Replies
Apr 10, 2006
.Net application failed to initialize
View 7 Replies
Apr 14, 2012
I'm using my.settings to save the load time of the solution. When my.settings.load_time value is changed and use my.settings.load_time.save() to save them. When I quit the application and manually start it again, the newly saved settings are used.
When I use either application.restart. The application will use the old values for my.settings.
My question is.. Is there a way to restart the application using either application.restart which will use the newly saved my.settings values?
View 7 Replies
Sep 7, 2010
I am trying to install my vb.net application on the other system.I have installed the whole vs on this system too but still getting the error "Application failed to initialize properly".I have .net2.0.This appl can be installed on the system where it is developed.
View 3 Replies
Feb 2, 2009
So i've coded a simple vb project in MS VB 2008. I then copied the contents of the 'bin/release' folder, and tried running the program on another machine. I'm getting 'the application failed to initialize' error. I'm assuming this is because i'm missing certain files, dll's or something. Or should I have copied the obj/release folder?
View 2 Replies
Mar 11, 2010
i am getting the error The application failed to Initialize properly (oxc000007b) when I use departmental Script Tools?
View 1 Replies
Feb 22, 2009
i made a program and used a program called Advanced Installer to put all the files from the build folder into one big install exe file to send to people but one they've installed it and go to open it they get an error saying: "the application has failed to initialize properly (0xc000135). Click on OK to terminate the application" What does this mean? do i need to have the NET framework on the machine its being run on?
View 6 Replies
Oct 23, 2011
i am just developing a library management system as one of my project. i using vb.net 2010 and the MS Access 2007 as back end. when i save some records into my database through my application it is correctly saved and i confirmed it through opening the relevant table in the database. but when i restart the application all the entered data were missing.
View 1 Replies
Dec 28, 2011
I have an application with a splash screen which gets shown before the application starts. One of the requirements of the application is to allow users to restart (or atleast clear the form) so that other test cases can be ran. Because there are so many forms and variables, we elected to simply call Application.Restart() to accomplish this.
What we would like to do now is disable the Splash Screen when Application.Restart() is called. That is, only show the Splash Screen when the application is initially started, not when it is restarted.
View 1 Replies
Jul 22, 2009
I developed a chat application with an attendant chat server. Everything is working fine. The issue now is the fact that whenever the chat server goes down (for instance, the server system shuts down as a result of power failure or some other problem), by the time the server system come back on, the chat server would have to be restarted manually.
I believe (and I know) it is more appropriate for the chat server application to restart itself when the computer comes back on (and of course regardless of who is logged in and of course, even before anyone logs in). I have a batch file that executes the chat server. My attempt was to create a windows service that start automatically and runs this batch file using a Network Service account on the server system. Although, I'm having a hard time with this (temporarily), I would love to ask if there are any alternatives to using a windows service.
View 3 Replies
May 21, 2012
I am getting the error: 'User' is ambiguous between declarations in Modules 'My.MyProject' and 'My.MyProject'.I am trying to debug an ASP.NET web application compiled as a file system project. Obviously the namespaces in question are in-built Microsoft namespaces so there is no way to change anything here nor change any class definitions.
View 2 Replies
Apr 26, 2012
i can't understand what the error:
"Error 1 'Application' is ambiguous between declarations in Modules 'WindowsApplication1.My.MyProject' and 'WindowsApplication1.My.MyWpfExtension'.F:DevVisualBasic 2010ProjectsWindowsApplication1WindowsApplication1My ProjectSettings.Designer.vb 33 16 WindowsApplication1"
View 1 Replies
May 24, 2012
i am using databse connection model but can't get actual result because of this error , i don't know why this occurring ,i have use the windows application with app.config file, i paste xml code.
<?
xmlversion="1.0"encoding="utf-8"?>
<
configuration>
[code]....
View 2 Replies
May 18, 2010
I'm trying to create an app with a GUI to run at a specified time (handled by Altiris) to run a locally stored program to give the user a specified amount of time to close the task, otherwise the computer is forced to log off destroying any unsaved information. The code I have looks to work, when built it shows no errors, but when I pull the executable (using VS 2010 Express) after the time expires I get a Windows Application Error for the program stating:
The Application failed to initialize properly (0xc0000142).
The code I'm running is:
Imports System
Imports System.Timers
Public Class Form1
Private Shared Shutdowntimer As System.Timers.Timer
Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
[Code] .....
View 6 Replies
May 24, 2010
I wrote an application on windows XP using visual studio 2008. Based on the .net framework 3.5. For some reason that I do not understand the application refuses to run on windows 7. You would think that if the .net framework 3.5 was installed on the windows 7 machine it would run.
View 10 Replies
Sep 3, 2010
I have a vb.net web application in visual web developer 2008 with a dll file and i need to debug a method in that dll. I also have project source files for the dll file itself. How could i make the web application use the source instead of the dll file so that i'd be able to debug it? I've tried debugging the dll project itself, but it's not a very good solution, because it seems the dll depends on the web application settings and data and it would simply be too much work to get it working. T
View 1 Replies
