Cant Get Rid Of "Configuration System Failed To Initialize" Exception?
Aug 10, 2010
Due to some bug I had deleted the whole bin folder *with* config files, yesterday but after doing so it was working fine but today the program always throws this exception:onfiguration system failed to initialize. Even when I have recreated the configuration files. The exception is thrown as soon as application starts.
View 1 Replies
ADVERTISEMENT
Dec 9, 2005
When i try to run my app I get this exception "Configuration system failed to initialize"I recently added a datascource to the app and am assuming that something has gone wrong there but it was all working ok and then this error just started.I assume it's a problem with my appconfig file which i'll post here I cant see anything wrong with it but.!!I've tried deleting the ConnectionString Section but nothing helps and i cant run my app at
[Code]...
View 1 Replies
Nov 24, 2009
I have an .NET winforms application(A). I am calling another .NET exe(B) file from the winforms application. When executes, it throws the following error.
I haven't kept any configuration file for the second exe file(B).
"Configuration system failed to initialize"
View 1 Replies
May 14, 2008
Have you tried configuring ASP.Net Membership together with Enterprise Library DAAB? When I run my application it throws the following exception:
"Configuration system failed to initialize"
It seems that it encounters a problem that normally don't occur when I setup my configuration file.
View 1 Replies
Sep 17, 2010
I have a VS Solution with several projects. I want to set a specific project to the start project in Debug mode. Everything seems to run fine as I set breakpoints on the initial Form and several initialization procedures. At one point however, I get this error which is not an issue when I compile and run the release version.
Here is an illustration of the Exception. Unrecognized configuration section configuration. (C:...path...File.vshost.exe.config line 25) The config file is listed below an the jit debugging = true statement is on line 25
[code]....
View 4 Replies
Jun 8, 2009
What is wrong with my app.config. Started getting the error when I added the log4net and configsections.
Error: Configuration System Failed to Initialize
Line of code
[htm]
MessageBox.Show(ConfigurationManager.AppSettings("DBFile"))
[/html]
[code]....
View 2 Replies
Apr 13, 2011
I am the author of a freeware that have been hundreds of downloads without problems... and only ONE user reports to me the error in object.Since the exception is handled, tanks to his report I can realize that the error is generated when is read this code line:
If My.Settings.Opened = True then
Now the question is: why a single PC over hundreds have problems gaining access to My.Settings?His PC has installed XP Home Edition SP3, my program is compliled for Framework2.0.
View 4 Replies
May 24, 2012
i am using databse connection model but can't get actual result because of this error , i don't know why this occurring ,i have use the windows application with app.config file, i paste xml code.
<?
xmlversion="1.0"encoding="utf-8"?>
<
configuration>
[code]....
View 2 Replies
Apr 18, 2011
im tying to use settings in visual basic; i have my sentence in the settings; i want to program a click event in order to appear that sentence in a textbox, after the click i i have this error [Code] "failed system boot configuration".
View 12 Replies
Aug 5, 2009
Error 1 Custom tool error: Failed to generate code. Exception of type 'System.OutOfMemoryException' was thrown. C:Documents and Settingsmiller_aDesktopFront End FCOMOctobaseOctobasefcomDataSet.xsd 1 1 Octobase
What does this mean? I have this error after i tried to add a database to my project in vb.net.If you're not living on the edge, you're taking up too much room
View 1 Replies
Jan 18, 2011
i have a data set on the data set many data adapters .i add a data adapter in the data set the designer was automatically delete then lot of error was coming and i search in google and i go this method and i do that right click the data set and "Run Custom tool" on that time the designer will automatically created. but when i do that a error was coming "The custom tool 'MSDataSetGenerator' failed. Exception of type 'System.Data.Design.InternalException' was thrown."
View 2 Replies
Nov 16, 2010
Receive 'ConfigurationManager' is not a member of 'Configuration' in VS2008.I read all of the topics in the forum about this error Tried adding areference to System.Configuration.dll to the project and an "Imports System.Configuration" to the vb file.Still get an error
View 7 Replies
Apr 10, 2006
.Net application failed to initialize
View 7 Replies
Aug 21, 2011
I have created a web application in ASP.NET using VB.NET as code behind file. I am using a COM object of ProvideX.Script class to connect to Sage MAS90 ERP. Everything was working fine in visual studio 2010. Now when I moved to the deployment phase, the problem gets started. I deployed my application in Windows Server 2008 in IIS7. When I run the application I get the following exception.[code]...
View 2 Replies
Sep 7, 2010
I am trying to install my vb.net application on the other system.I have installed the whole vs on this system too but still getting the error "Application failed to initialize properly".I have .net2.0.This appl can be installed on the system where it is developed.
View 3 Replies
Feb 2, 2009
So i've coded a simple vb project in MS VB 2008. I then copied the contents of the 'bin/release' folder, and tried running the program on another machine. I'm getting 'the application failed to initialize' error. I'm assuming this is because i'm missing certain files, dll's or something. Or should I have copied the obj/release folder?
View 2 Replies
Jan 17, 2010
I have made some custom .dll's or components and then I downloaded custom webkit component and it didn't work perfectly(I mean that I always get some error code with this error: An error occurred creating the form. See Exception.InnerException for details.The error is: Failed to initialize activation context. When I try to debug the project). And if I have made a new project, and make a component with user control, and I haven't saved it yet, it will work fine, but until I save it then it will give me a designer error.
View 1 Replies
Mar 11, 2010
i am getting the error The application failed to Initialize properly (oxc000007b) when I use departmental Script Tools?
View 1 Replies
Apr 10, 2009
I've been having an error with my Visual Studio 2008 with .net framework 3.5 Sp1. I am creating a project, and it would run properly until after a while when I try debugging the project I would get a error message that says:
"Error while trying to run project: Could not load file or assembly 'Name_of_Project' or one of its dependencies. The module was expected to contain an assembly manifest."
Also the .exe file that it creates in the bindebug folder gives and error that says:
"The application failed to initialize properly (0xc000007b). Click OK to terminate the application."
These errors after a format of the machine would disappear for awhile but not indefinitely.
View 4 Replies
May 18, 2010
I'm trying to create an app with a GUI to run at a specified time (handled by Altiris) to run a locally stored program to give the user a specified amount of time to close the task, otherwise the computer is forced to log off destroying any unsaved information. The code I have looks to work, when built it shows no errors, but when I pull the executable (using VS 2010 Express) after the time expires I get a Windows Application Error for the program stating:
The Application failed to initialize properly (0xc0000142).
The code I'm running is:
Imports System
Imports System.Timers
Public Class Form1
Private Shared Shutdowntimer As System.Timers.Timer
Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
[Code] .....
View 6 Replies
Aug 13, 2009
When I install .net Frame work 2.0 I had this Error when the setup writing system register values RegSvcs.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have running an blank application (blank forum) and i running it in the VS 2005 IDE iget this error: windowsapplicatin1.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have a program in setup package that i made from 1 week . i have install this program and when i want to run it i had this problem
[Code]...
View 2 Replies
Apr 11, 2011
When i click on my installed VB.net application icon on the desktop,i receive the message : 'Application failed ti initialize property ox700000000000000 ..... click ok to terminate application'.
View 2 Replies
Oct 9, 2010
When the .net framework cannot be found, the following message is displayed:
"The application failed to initialize properly (0x00000135)"
Is there a way to make it a tiny bit more specific (instead of writing a wrapper in another language), eg. by telling the user about the .Net fx?
View 1 Replies
Dec 30, 2009
why i can open my .exe project and when i send to my friend when he press on the exe it shows this the application failed to initialize properly (0x0000135) you dont know why ? ...
View 2 Replies
Aug 19, 2010
To the board: Lately I've been getting Runtime error 3447 ("The Jet VBA file (VBAJET.dll for 16-bit versions, or VBAJET32 for 32-bit versions) failed to initialize when called. Try reinstalling the application that returned the error") when attempting to open a certain program (not one that I designed, just downloaded and installed). I installed this program in January 2009, but this error began happening only this past July. someone else to information about the files vbajet32.dll and expsrv.dll. One site said that the problem was probably caused by the file expsrv.dll being absent, but I checked my System32 folder, and it's there. As far as I can tell, it has always been there (the computer was made in 2008, and as I said the program had always worked before). Vbajet32.dll is also there. I tried uninstalling and reinstalling the program, but error 3447 still occurs. I also tried uninstalling the program and installing an older version, but 3447 is still there.
I tried replacing expsrv.dll, thinking it might have been corrupt, but that didn't help, and I cannot register that dll anyway. I can't figure this thing out. Both of the files are there, and I didn't change any settings or anything anywhere between last January and this July. By the way, I am on Vista.
View 1 Replies
Apr 13, 2011
My project Developed under Vb2008 and Distrubution package Created by 'Avanced Installer 8.1.1' runs fine in some PCs. But in a specific PC, it produces ApplicationError as 'The application failed to initialize properly (0X0000135). Click on OK to terminate the application." The PC is a standalone Pentium-4 PC with OS windows XP (SP2).
View 2 Replies
Aug 9, 2009
i have a program but when i want to run it in VS IDE or out of it i had this Error Application Error: The application failed to initialize properly (0xc000007b). Click on OK to terminate the application.I had made the program by basic language on VS 2005 . net
View 1 Replies
Aug 10, 2010
I'm getting 'Catch' cannot catch type 'Object' because it is not 'System.Exception' or a class that inherits from 'System.Exception'. and 'Expression detected' Code underlined in blue: Catch obj1 As Object When (?)
Private Sub OpenJAMem()
Dim num3 As Integer
Try
[code]....
View 2 Replies
Apr 22, 2008
I have seen a similar post under C++ but after reading that post and many others I have been unable to find a solution for VB VS2008.I have just ported one solution withseven projects from VS2005to VS2008. All seemed fine at compile time but when I attempted to step into the code in the debugger I received the following error:
View 1 Replies
Jan 12, 2009
I want to use app.config as outlined here[URL]..When I add the following code, the word using is underlined
using System.Configuration And in this piece of code ConfigurationSettings is undelined
Dim dbPath as String = ConfigurationSettings.AppSettings("DatabasePath")
Dim email as String = ConfigurationSettings.AppSettings("SupportEmail")
View 7 Replies