im tying to use settings in visual basic; i have my sentence in the settings; i want to program a click event in order to appear that sentence in a textbox, after the click i i have this error [Code] "failed system boot configuration".
View 12 RepliesI have a VS Solution with several projects. I want to set a specific project to the start project in Debug mode. Everything seems to run fine as I set breakpoints on the initial Form and several initialization procedures. At one point however, I get this error which is not an issue when I compile and run the release version.
Here is an illustration of the Exception. Unrecognized configuration section configuration. (C:...path...File.vshost.exe.config line 25) The config file is listed below an the jit debugging = true statement is on line 25
[code]....
What is wrong with my app.config. Started getting the error when I added the log4net and configsections.
Error: Configuration System Failed to Initialize
Line of code
[htm]
MessageBox.Show(ConfigurationManager.AppSettings("DBFile"))
[/html]
[code]....
When i try to run my app I get this exception "Configuration system failed to initialize"I recently added a datascource to the app and am assuming that something has gone wrong there but it was all working ok and then this error just started.I assume it's a problem with my appconfig file which i'll post here I cant see anything wrong with it but.!!I've tried deleting the ConnectionString Section but nothing helps and i cant run my app at
[Code]...
I have an .NET winforms application(A). I am calling another .NET exe(B) file from the winforms application. When executes, it throws the following error.
I haven't kept any configuration file for the second exe file(B).
"Configuration system failed to initialize"
Have you tried configuring ASP.Net Membership together with Enterprise Library DAAB? When I run my application it throws the following exception:
"Configuration system failed to initialize"
It seems that it encounters a problem that normally don't occur when I setup my configuration file.
I am the author of a freeware that have been hundreds of downloads without problems... and only ONE user reports to me the error in object.Since the exception is handled, tanks to his report I can realize that the error is generated when is read this code line:
If My.Settings.Opened = True then
Now the question is: why a single PC over hundreds have problems gaining access to My.Settings?His PC has installed XP Home Edition SP3, my program is compliled for Framework2.0.
i am using databse connection model but can't get actual result because of this error , i don't know why this occurring ,i have use the windows application with app.config file, i paste xml code.
<?
xmlversion="1.0"encoding="utf-8"?>
<
configuration>
[code]....
Due to some bug I had deleted the whole bin folder *with* config files, yesterday but after doing so it was working fine but today the program always throws this exception:onfiguration system failed to initialize. Even when I have recreated the configuration files. The exception is thrown as soon as application starts.
View 1 RepliesReceive 'ConfigurationManager' is not a member of 'Configuration' in VS2008.I read all of the topics in the forum about this error Tried adding areference to System.Configuration.dll to the project and an "Imports System.Configuration" to the vb file.Still get an error
View 7 RepliesI am working with a old windows app (vb.net), this was working fine before with the old out look (owa) now we moved to 2010 outlookweb acess, after movingis application is unable to sync the exchange applications to web.
Dim
req As
Net.HttpWebRequest
[code].....
IDE :: error creating the web proxy specified in the 'system.net/defaultproxy' configuration section.
View 6 RepliesI have below installer class to ngen app after installation and I'm getting several errors.
Imports System.Collections
Imports System.ComponentModel
Imports System.Configuration.Install
'This line gives warning: Namespace or type specified in the Imports
[code]....
I am using Visual Studio 2010 and referencing System.Configuration at the top "Imports System.Configuration" but I'm still getting not declared and could be inaccessible due to it's protection level. What now?
View 2 RepliesI have a web service created with vb.net in vs 2010. Here is a look at my property
Public Class MyClass
Inherits ConfigurationSection
Protected _score As Integer
[code].....
When I try to add this as a service to a web app, also done in vs2010 with vb.net, I get the error in the title. Please help with this. I am not sure what is needed in order to implement a default accessor.
Error 1 Custom tool error: Failed to generate code. Exception of type 'System.OutOfMemoryException' was thrown. C:Documents and Settingsmiller_aDesktopFront End FCOMOctobaseOctobasefcomDataSet.xsd 1 1 Octobase
What does this mean? I have this error after i tried to add a database to my project in vb.net.If you're not living on the edge, you're taking up too much room
how to convert it to .net. I have the Imports System.Management figured out so far.......
strComputer = "." ' Local computer
set objWMIDateTime = CreateObject("WbemScripting.SWbemDateTime")
set objWMI = GetObject("winmgmts:\" & strComputer & "
ootcimv2")
set colOS = objWMI.InstancesOf("Win32_OperatingSystem")
[code]...
Here is the error I get when trying to debug my program: The "ResolveAssemblyReference" task failed unexpectedly.
System.IO.FileLoadException: The given assembly name or codebase was invalid. (Exception from HRESULT: 0x80131047)
[code].....
I've been working on my own version of Notepad/Wordpad and I just tried adding the Find feature for the Rich Text box and I got an error. Here's the code I had:[code]
View 13 RepliesIm getting that error in the da.Fill(ds)
Imports System.IO Imports System.Data.SqlClient
[Code]...
I am creating a custom config section that will allow me to manage what ELMAH exceptions I want to ignore from my VB.NET/ASP.NET app. Here's my code. I made it easy to paste in a blank code file if anyone's up to the challenge of diagnosing the problem.
CODE:
When I execute this code:
CODE:
I get the error An error occurred creating the configuration section handler for IgnoredExceptionSection: Could not load file or assembly 'WEB' or one of its dependencies..
What boggles my mind is that this all works fine in my C# console test app after I convert the code from VB.NET using a web utility. However, when I paste the VB code from my web app into my VB.NET console test app, it doesn't work there, either, so it appears to be a C#/VB issue. What am I doing wrong here?
I have seen a similar post under C++ but after reading that post and many others I have been unable to find a solution for VB VS2008.I have just ported one solution withseven projects from VS2005to VS2008. All seemed fine at compile time but when I attempted to step into the code in the debugger I received the following error:
View 1 RepliesI want to use app.config as outlined here[URL]..When I add the following code, the word using is underlined
using System.Configuration And in this piece of code ConfigurationSettings is undelined
Dim dbPath as String = ConfigurationSettings.AppSettings("DatabasePath")
Dim email as String = ConfigurationSettings.AppSettings("SupportEmail")
When we are typing the msconfig in Start>Run the window is appearing that is named System Configuration Utility . Now I want with WMI and API objects access this data and change them by programming in VB6. Specially, I want to change data on Start-up lists and Boot up services Can any one suggest me a solution?
Note: When I am going to use registry datas in compare of System Configuration Utility I have found that all of applications are not listed in registry + startup folder of windows. I think there is a provider for this issue in windows that returns or manages all applications on startup. I am searching for that.
I created a typed dataset a day or so ago, then I added a whole bunch of tableadapter/tables with some relationships etc... suddenly out of nowhere it decides my dataset "is not defined". everywhere in my code where i use this dataset now has an error. I tried not to pull out my hair and do a Clean then Rebuild solution... out of nowhere it just refuses to generate code. Object reference not set to an instance of an Object. It would be nice if it was my object so i could find it but it's not.
Curiously I also lost the little database icon on the dataset in the solution explorer.I can still open it in the designer and preview my queries etc... it just wont make the code. it's driving me insane. anyone got a solution?
I'm using Visual Basic Express 2010 and SQL Express 2008 in Windows XP. At first I couldn't add a datasource (the .mdf file for the database) because of a "Operating system error 32" which I seemed to have resolved by giving myself full permissions for .mdf file (by right clicking on the file and going into properties and then Security) and restarting the SQL SERVER (SQLEXPRESS) service. The dataset for the database is in my solution explorer but when I right click on a table adapter to add a query and attempt to open up the query builder, I get the error in the title above.
View 1 RepliesI've made heavy use of the convenient My.Settings feature but sometimes I run into problems using it.
View 2 Replies[2005] System.Configuration.AppSettingsReader
View 4 RepliesIf i type this in:
CODE:
I get an error: Error 1 Operator '=' is not defined for types 'System.Drawing.Image' and 'System.Drawing.Bitmap'.
I have also used 'is' instead of '=' but that doesn't work either.
My app downloads multiple files, and its limited to 2 connections. Now I've read you can change this, by adding the following in the app.config file:
CODE:
And that does work, however I would like to hardcode it in, rather than use app.config file.
I've tried (importing System.Net.Configuration):
CODE:
But that doesn't work, still stays limited to 2 connections total.