When the .net framework cannot be found, the following message is displayed:
"The application failed to initialize properly (0x00000135)"
Is there a way to make it a tiny bit more specific (instead of writing a wrapper in another language), eg. by telling the user about the .Net fx?
I am trying to install my vb.net application on the other system.I have installed the whole vs on this system too but still getting the error "Application failed to initialize properly".I have .net2.0.This appl can be installed on the system where it is developed.
View 3 Repliesi am getting the error The application failed to Initialize properly (oxc000007b) when I use departmental Script Tools?
View 1 RepliesI'm trying to create an app with a GUI to run at a specified time (handled by Altiris) to run a locally stored program to give the user a specified amount of time to close the task, otherwise the computer is forced to log off destroying any unsaved information. The code I have looks to work, when built it shows no errors, but when I pull the executable (using VS 2010 Express) after the time expires I get a Windows Application Error for the program stating:
The Application failed to initialize properly (0xc0000142).
The code I'm running is:
Imports System
Imports System.Timers
Public Class Form1
Private Shared Shutdowntimer As System.Timers.Timer
Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
[Code] .....
When I install .net Frame work 2.0 I had this Error when the setup writing system register values RegSvcs.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have running an blank application (blank forum) and i running it in the VS 2005 IDE iget this error: windowsapplicatin1.exe-Application Error The application failed to initialize properly (0xc000007b) click OK to terminate the application and i have a program in setup package that i made from 1 week . i have install this program and when i want to run it i had this problem
[Code]...
My project Developed under Vb2008 and Distrubution package Created by 'Avanced Installer 8.1.1' runs fine in some PCs. But in a specific PC, it produces ApplicationError as 'The application failed to initialize properly (0X0000135). Click on OK to terminate the application." The PC is a standalone Pentium-4 PC with OS windows XP (SP2).
View 2 Repliesi have a program but when i want to run it in VS IDE or out of it i had this Error Application Error: The application failed to initialize properly (0xc000007b). Click on OK to terminate the application.I had made the program by basic language on VS 2005 . net
View 1 RepliesWhen i click on my installed VB.net application icon on the desktop,i receive the message : 'Application failed ti initialize property ox700000000000000 ..... click ok to terminate application'.
View 2 Repliesi made a program and used a program called Advanced Installer to put all the files from the build folder into one big install exe file to send to people but one they've installed it and go to open it they get an error saying: "the application has failed to initialize properly (0xc000135). Click on OK to terminate the application" What does this mean? do i need to have the NET framework on the machine its being run on?
View 6 Replieswhy i can open my .exe project and when i send to my friend when he press on the exe it shows this the application failed to initialize properly (0x0000135) you dont know why ? ...
View 2 RepliesSuddenly today , when I started my computer and went on to open the VS , I got this strange message: Do you know what it might mean ? I didn't installed anything on my PC for a long time, so I can't think of anything ...
View 8 Replies.Net application failed to initialize
View 7 RepliesSo i've coded a simple vb project in MS VB 2008. I then copied the contents of the 'bin/release' folder, and tried running the program on another machine. I'm getting 'the application failed to initialize' error. I'm assuming this is because i'm missing certain files, dll's or something. Or should I have copied the obj/release folder?
View 2 Repliesi am using databse connection model but can't get actual result because of this error , i don't know why this occurring ,i have use the windows application with app.config file, i paste xml code.
<?
xmlversion="1.0"encoding="utf-8"?>
<
configuration>
[code]....
I have created a web application in ASP.NET using VB.NET as code behind file. I am using a COM object of ProvideX.Script class to connect to Sage MAS90 ERP. Everything was working fine in visual studio 2010. Now when I moved to the deployment phase, the problem gets started. I deployed my application in Windows Server 2008 in IIS7. When I run the application I get the following exception.[code]...
View 2 RepliesWhen i try to run my app I get this exception "Configuration system failed to initialize"I recently added a datascource to the app and am assuming that something has gone wrong there but it was all working ok and then this error just started.I assume it's a problem with my appconfig file which i'll post here I cant see anything wrong with it but.!!I've tried deleting the ConnectionString Section but nothing helps and i cant run my app at
[Code]...
I have an .NET winforms application(A). I am calling another .NET exe(B) file from the winforms application. When executes, it throws the following error.
I haven't kept any configuration file for the second exe file(B).
"Configuration system failed to initialize"
I have made some custom .dll's or components and then I downloaded custom webkit component and it didn't work perfectly(I mean that I always get some error code with this error: An error occurred creating the form. See Exception.InnerException for details.The error is: Failed to initialize activation context. When I try to debug the project). And if I have made a new project, and make a component with user control, and I haven't saved it yet, it will work fine, but until I save it then it will give me a designer error.
View 1 RepliesHave you tried configuring ASP.Net Membership together with Enterprise Library DAAB? When I run my application it throws the following exception:
"Configuration system failed to initialize"
It seems that it encounters a problem that normally don't occur when I setup my configuration file.
I have a VS Solution with several projects. I want to set a specific project to the start project in Debug mode. Everything seems to run fine as I set breakpoints on the initial Form and several initialization procedures. At one point however, I get this error which is not an issue when I compile and run the release version.
Here is an illustration of the Exception. Unrecognized configuration section configuration. (C:...path...File.vshost.exe.config line 25) The config file is listed below an the jit debugging = true statement is on line 25
[code]....
What is wrong with my app.config. Started getting the error when I added the log4net and configsections.
Error: Configuration System Failed to Initialize
Line of code
[htm]
MessageBox.Show(ConfigurationManager.AppSettings("DBFile"))
[/html]
[code]....
I've been having an error with my Visual Studio 2008 with .net framework 3.5 Sp1. I am creating a project, and it would run properly until after a while when I try debugging the project I would get a error message that says:
"Error while trying to run project: Could not load file or assembly 'Name_of_Project' or one of its dependencies. The module was expected to contain an assembly manifest."
Also the .exe file that it creates in the bindebug folder gives and error that says:
"The application failed to initialize properly (0xc000007b). Click OK to terminate the application."
These errors after a format of the machine would disappear for awhile but not indefinitely.
I am the author of a freeware that have been hundreds of downloads without problems... and only ONE user reports to me the error in object.Since the exception is handled, tanks to his report I can realize that the error is generated when is read this code line:
If My.Settings.Opened = True then
Now the question is: why a single PC over hundreds have problems gaining access to My.Settings?His PC has installed XP Home Edition SP3, my program is compliled for Framework2.0.
So I was wondering if anyone has done their own Forms (inheriting windows form and editing the properties) and if so, what your finished result was. And, if you are willing to post a screenshot of your finished result, that would be sweet! Trying to get some ideas of what can be accomplished with customizing the default form.
View 1 RepliesI'm using Visual Basic Express 2010 and SQL Express 2008 in Windows XP. At first I couldn't add a datasource (the .mdf file for the database) because of a "Operating system error 32" which I seemed to have resolved by giving myself full permissions for .mdf file (by right clicking on the file and going into properties and then Security) and restarting the SQL SERVER (SQLEXPRESS) service. The dataset for the database is in my solution explorer but when I right click on a table adapter to add a query and attempt to open up the query builder, I get the error in the title above.
View 1 RepliesI'm trying figure out the VB code necessay to initialize the DateTimePicker object at program startup.I've got this subroutine, which creates the datetimepicker:
Public
Class
Form1
[code]....
I'm using Visual Basic Express 2010 and SQL Express 2008 in Windows XP.I created a database on my local PC HDD. At first I couldn't add a datasource (the .mdf file for the database) because of a "Operating system error 32" which I seemed to have resolved by giving myself full permissions for .mdf file (by right clicking on the file and going into properties and then Security) and restarting the SQL SERVER (SQLEXPRESS) service.The dataset for the database is in my solution explorer but when I right click on a table adapter to add a query and attempt to open up the query builder, I get the error in the title above.
View 10 RepliesThis problem seams to be in other forms without any concrete solutions. I figured id post it here since i am running into the same problem and i am sure you have at well at some point (if not then you will soon...lol). The problem is this error is appearing when i open a form in designer mode.
[Code]....
what account for this error message in ls beta 2?'' The last change wasn't successfully persisted.Please shot down the running application.
View 1 RepliesWhen I start VS2008Prof I get a Package Load Failure "Package 'Microsoft.VisualStudio.Xaml' has failed to load properly". Repairing VS and resetting ('devenv /resetsettings') it did not help.
View 3 Replies