I remember that to set expectations on methods that return void in C# one has to write: mockedRepository.Expect(() => mr.AddUser(someUser)).DoOtherStuff()where AddUser returns void.How to achieve the same in VB.NET?
EDIT:I've found similar question. May be helpful: How to mock a method with Rhino Mocks in VB.NET .
I have a read-only dictionary on a dependency that I'd like to be able to stub with return values, and check that assignments to it have happened.
I was hoping that Rhino.Mocks would create an empty dictionary for me by default, but unfortunately it doesn't. Since it is read-only, I can't create a new dictionary and assign it to that property.
I was hoping to be able to stub it instead. From what I understand, the C# syntax for this would looking something like this:
m.Stub(x => x.myProperty).Return("abc");
So I was hoping that this would work for VB:
m.Stub(sub(x) x.myProperty).Return("abc");
But it doesn't (compiler error). how to accomplish this? I'm open to the Expect/Verify syntax if it can accomplish this...
I am trying to create a unit test similar to how I would have done one in C# but am struggling with the lambdas in vb. Bascially I am trying to mock a class and then create a stub and return. In C# I would have done something like;
MockedPersonRepository
.Stub(x => x.Find(id))
.Return(person)
[code].....
The following C# code works just fine and the test passes as expected.
using NUnit.Framework;
using Rhino.Mocks;
namespace RhinoMocksTesting
{
public interface ITesting
[Code]...
The Expect.Call line produces the following build error: "Overload resolution failed because no accessible 'Expect' accepts this number of arguments." What is the proper way to use Expect.Call with a mocked property in VB.NET? I've seen a couple posts that say Rhino Mocks works better in VB10, but I'm stuck with Visual Studio 2008 for this current project.
I need help and wondering if you can help me to get my first project...it's a hobby and wondering if you can get me code for this so i can see how it does it* Evaluate( ) Prints the evaluation of the hand to the evaluation Label.
o If IsFlush( ), prints "flush; "
o calls SetPipArray( )
o Uses a For Loop to go through pipArray. For each element, uses a Select Case statement to
[code]....
I'm currently working with a client's VB.Net code, which was developed for them by a small development shop a few years ago and which they purchased and have been maintaining and uprgrading since. This client's primary developer is out on indefinite (likely permanent) medical leave and I'm now filling in until they bring in a full timer (as I'm a contractor here). My current task is to add some functionality to a the VB.Net code they purchased. I'm finding practices and techniques in the code that absolutely baffle me and can't make the code do what I want. I'm starting to wonder if it's me and was hoping to get some thoughts on the code I've encountered.
For example: Setting a variable to accept the result of a function by calling the function with many parameters, clearing the parameters in the function, setting them to some value, calling another function with those new values, then never using the values returned by the functions. I'll add a code snippet in the first comment since this is already getting long.
Student pursuing BSIT degree, employer expectations, entry level. I would like to solicit opinions from this forum as to what your professional expectations are as regards an entry level position in working in the database realm... I see many job opportunities that require a minimum of 2 or more years experience, how does one go about obtaining this experience (I have tried very hard to maintain a minimum 3.70+ GPA) but have ZERO work experience in this field... I spend non school time working in VB and SQL to try and increase my proficiency. I have considered postponing my job search until I obtain certifications from brainbench etc... Any criticism and or advise is welcomed... Again I have no experience in database other than undergrad work in class.
View 2 RepliesI'm looking into adding some unit tests for some classes in my data access layer and I'm looking at an update routine that has no return value.It simply updates a row based on the id you provide at whichever column name you provide.Inside of this method, we collect the parameters and pass them to a helper routine which calls the stored procedure to update the table.Is there a recommended approach for how to do unit testing in such a scenario?
View 4 RepliesI use VS team system 2008. At the moment i need to test some business classes, i have found two kinds testing NUnit and the unit testing provided by the VS team system. what are there differences?
View 1 RepliesI'm building an Active Directory wrapper in VBNET 2.0 (can't use later .NET) in which I have the following:
IUtilisateur
IGroupe
IUniteOrganisation
These interfaces are implemented in internal classes (Friend in VBNET), so that I want to implement a façade in order to instiate each of the interfaces with their internal classes. This will allow the architecture a better flexibility, etc.Now, I want to test these classes (Utilisateur, Groupe, UniteOrganisation) in a different project within the same solution. However, these classes are internal. I would like to be able to instantiate them without going through my façade, but only for these tests, nothing more.
[Code]...
I've attempted to use a function in my code to calculate shipping and handling. When I enter my test data quantity 2, weight 3 and price 19.95. The result displayed is that my shipping and handling is 0 but should be 1.75. This is what my shipping and handling function looks like. The name of the function is shipping_handling it accepts a parameter by value and it stores the parameter in a variable called OrdersWeight_Decimal.
[Code]...
I have a lambda function that I can assign to a field and pass it to a sub routine, but cannot assign to a property. My field is defined as follows:
Public Delegate Sub SubDelegate()
Private pDeleteFunction As Func(Of BookCaseRow, SubDelegate)
[code].....
I am doing a alarm system project which allows a user to select a particular alarm and test the sound. It will also enable the user to save the alarm as the prefered type. So that the next time the alarm rings, it will be that tone which the user has selected.i have already done the select alarm button, play and stop button, but i am having trouble with the save button. [code]
View 1 RepliesI am trying to make a program that deletes all setting made by using the SaveSetting function. I don't use the MySettings class as it makes a setting for each user. This is basically what I need it to do:[code...]
View 9 RepliesI'm making a custom class that mocks the System.Drawing.Rectangle class because the Rectangle class doesn't have a name property. I need a name property because I am adding all of my rectangles to a collection and I need a little more info stored than just their locale and size. So I changed the _onPaint event but nothing is working out when I run the program?
Public Class Rectanglar : Inherits UserControl
Public BackgroundColor As Color = Color.Blue
Public Sub New(ByVal name As String, ByVal XY As Point, ByVal Widthy As Integer, ByVal Heighty As Integer)
[code].....
In our projects we use setting variables to store user setting for the applications. Moreover, with every latest version of the applications, we upgrade these variables to retain user settings.Normally, this works fine, but recently one of my end user reported an error i.e.Configuration System failed to initialize". The error is related to user.config file. Therefore we requested the user to send us his file.After received the folder, we noticed that it contains 3 files (3begfjb.newcfg,3begfjb.tmp and user. config). 3begfjb.tmp is an empty file, while 3begfjb.newcfg and user.config are identical files. We tried to open these files but the data in user.config isn't proper xml rather its unreadable formatted file.Do any you guys had experienced this sort of issue or any ideas how and what may have created these files and corrupted user.config file.
View 3 RepliesI want to make an numerical integration method with takes in an analytic function and integrate it over a specific interval. For the numerical integration procedure I want to use some procedures in nr.com. The problem is that these are programmed in C++ and they uses functors to pass a function to the integration method. How can I do this in VB 2010?
I want to initialize the function (i.e. set a=1,b=0 for function y(x)=a*x+b) and then pass the function to the integration method. Then when the integration method call the function it only calls the function with one parameter (i.e. x since a,b is already set)
What is the best way to do this in VB2010?I want to make a general integration method where I can pass any single valued function and integration limits.
I have just started using VB, and from what I have found so far it seems like the tools you have is
- to us a delegate for the function
- to use a lambda expression for the function
- send a pointer/adressOf
- to create a function class/structure and submit this to the function
As for now I am most inclined to create a function-class. But I am not really sure how.F.ex. I make different classes for each "uniqe function" I want to integrate, but how can I pass them to the integration function when I need to specify the argument type in the integration-function-call?This seems like a basic problem which applies to many Math operations, so I think it would be very useful to clarify this.
In my project developed for using asp.net with vb.net coding. Now we need to performace testing using the Jmeter tool. we can't able to test because in my application lot of session variable used, Jmeter tool does not support session variables i think.Check with debugging:1.Assign the session(userName) ="abc" then goes to next page, then check value same session vaule as nothing.
View 1 RepliesI have a Do loop that I want to exit once it goes through without making any changes to an object I created. I figured the best way to do this was to create a temporary copy of the object at the beginning of the loop and then compare that to the actual object at the end of the loop to determine whether any changes were made to it. The problem occurs when variables are accessed and copied by reference. I have tried to use some of the methods such as .Clone and .Equals (maybe I shouldn't be using these, but I didn't see any better built-in methods), but I seem to be doing some stuff wrong. Can somebody give me an example of a good way to copy an object for later equality testing, and how to do the equality testing?
View 5 RepliesI was once a VB 6 expert, but it's been a while.I am attempting to create a simple DLL in VB. I created a new WCF Service Library, which is what it looks like I needed to do. I filled out the interface and implemented it. Here's the interface:
<ServiceContract()>
Public Interface AgileApi
<OperationContract()>
[code]....
And attempted to call it, but I get System.EntryPointNotFoundException. I've tried pathing the defined library and copying the dll file into the same place where my EXE is, but no change to the error.
I'm writing a piece of code to manage the Unhandled exceptions in my VB application.
I'm using the following code
Partial Friend Class MyApplication
Private Sub MyApplication_UnhandledException(ByVal sender As Object, ByVal e As Microsoft.VisualBasic.ApplicationServices.UnhandledExceptionEventArgs) Handles
[Code]....
I'm trying to determine if a file "G:myfilesfile1.txt" exists. Using sample code from numerous web searches I can't make any of the FileSystemObjects work. Seems to me the FSO routines are an add-in to VB. If this is so, how do I add them in?
In noncode, this is what I really want to do:
if "file1.txt" exists AND "file2.txt" exists
if "file1.txt" filedate > "file2.txt" filedate
copy "file2.txt" to "fileold.txt"
[Code].....
when I try to test for a null value using the following:
If not string.isnullorempty(trvlitreadservice.itineraryinfo.reservationitems(zbook).value) then .........
I get an error as soon as it hits a null value. I thought this was supposed to test for a null value yet it throws an error for the very thing I'm testing for.
Private Sub CompareTime3()
Dim NowTime3 As Date
Nowtime3 = (TimeOfDay)
[code].....
In each of the two test sub routines, both if-then statements end up as true and I get both messages boxes displayed ("Timeslot is 16" then "Timeslot is 40" are displayed. One comaprison is AM the other is PM. How can one variable be true for both?
When i try to run my unit tests in vb.net, visual studio closes down because of an error.I don't know what is causing the problem but i is very frustrating.I have a project running for school that i can't continue because of this problem.When i had visual studio installed under windows vista i didn't got that problem. (same version of visual studio)
View 8 RepliesPublic Class Form1
Dim SW As New Stopwatch
Dim MS As New MenuStrip
Dim Btn As New ToolStripButton
[code]....
We have a DateTime Service that pulls the Database date down when we need to use a Date. Now, If I want to run a test using "Todays" Date using FitNesse, What would be the easiest way of creating a way to have (OurService).CurrentDate be static? We have a control that ads Days,Years, or Months to the current date.. and I would like to be able to test this.
View 1 RepliesI have been assigned a task of exploring unit testing using tools available in the market.My question is how do i write an API that would help in writing unit test cases.Example i can use nunit to write something like this to check whether file exists in the given location.
<Test()> _
Public Sub CheckOutputFileInfo()
ReportPath = "D:temp est.txt"
[code].....
i need to learn how to do automated testing using visual basic. i already know little bit about visual basic. now how can i do automated testing using vb.any good resource to study about that? even if it a link based resource also fine. and i need your suggestion on how to carry on with testing in visual basic and how to do it well. waiting for your reply.
View 2 RepliesIn the project that i;m currently working on i;m not allowed to touch GUI for anyreason that includes program testing. I'm in bit of s frustration becuase prior to this all must application were developed and tested using GUI. Typicvally it wold take a me a week to develop an app now it taking more than that. Especially the TDD with Unit testing. The documentation kills more time too......
View 4 Replies