In my windows application, I want to check which part of code (or routine) has caused un-handled exception event to occur from application events in its running mode (not debugging).
If this is possible then please guide me how to do this.
If any clarification regarding this is required,
i want to know what are the methods in order for me to extract the information that is stored in the exception. i also would like to know how do i extract the code line that caused the exception to occur.
View 6 RepliesI found some threads talking about this.. but when I follow the thread on where to do it.. it must be talking VS2005.. cause on vs2008 in project properties -> application tab-> I dont see View Application Events button. so I assume its moved in VS2008 ? I did find some code I guess to do the same thing.. but I wanted to make sure I do it correct.. since I have an app that a client is running and they keep getting framework exceptions and I have no clue where its coming from.
View 18 RepliesI have a service application that randomly stops without any errors in my log or in the event application log. I believe that there could be an unhandled exception somewhere in the code so I set up the AppDomain.Unhandled event to catch any exceptions. While trying to induce unhandled exceptions I have found that this event is not always fired. I added the following code to my service's Shared Sub Main method (but I orginally had it in the OnStart method and was seeing mostly the same thing)
Dim currentDomain as AppDomain = AppDomain.CurrentDomain
Add Handler currentDomain.UnhandledException, Address of MyHandler
I am facing a problem where i couldnt able to fix it. Could anyone help me on this issue.
[Code]...
An unhandled exception has occurred in your application??
View 3 RepliesI've been using it for three days, and tried to make my own application. Everything was going okay, it ran fine in the debugger and everything worked, so I assumed there would be no problems. But then when I went to run it from the exe in the folder, it shows me this:
Quote:
System.Threading.ThreadStateException: Current thread must be set to single thread apartment (STA) mode before OLE calls can be made. Ensure that your Main function has STAThreadAttribute marked on it.
at System.Windows.Forms.WebBrowserBase.OnHandleCreated(EventArgs e)
[CODE]............
I copied what I think to be the most important part of it. I've been searching around, and it says to do something with the main method, but I have no idea what that means.
activating just In time (JIT) debugging-- I have a propmt that I have an unhandled exception in my application (??).
View 1 Repliesunhandled exception has occurred in your application
View 7 RepliesSee the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. [Code]. When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box. What is this Error about, can anyone explain please?
View 4 RepliesIn my code I am trying to come up with the following messages using a try/catch Unhandled exception has occurred in your application. If you click continue, the application will ignore this error adn attemp to continue. If you click Quit, the application will close immediately.conversion from string """" to type 'integer' is not valid Warning Icon followed by 3 buttons one that saids the DETAILS, another for CONTINUE, and one for QUIT.Here is part of my code. I did use Try/catch correctly, but it doesnt say the message the way i described it above ..
[code]...
unhandled exception has occurred in your application .net framework if you click Click continue and application will ignore this error and attempt to continue if you click quit the application will close immediatly
index 62515 out of bounds
In this application, it fills the access database with data
I try to share my project to the other computer and i got this error:
Unhandled exception has occurred in your application, If you click
Continue. the application will ignore this eror and attempt to continue. If you click Quit, the application will close immediately.
The File "\FolderProjectBinDebugProjectDatabase.mdf" is on a network path that is not supported for data files.An attemp to attach an auto-named database for "\FolderProjectBinDebugProjectDatabase.mdf" failed.A database with the same name exists, or specified file cannot be opened, or it is located on UNC how to fix this error?
I am working on a vb windows form application with several connected forms. Its used to manipulate a MySQL database. One of the sub-forms has the following code snippet:
[Code]...
In the process of finnishing up the application. Some NOT all beta testers have had the same problem.
An error box that states: Unhandled exceptions has occurred in your application. If you click Continue, the application will ignor this error and attempt to continue. If you click Quit, the applicatiob will close immediatly.
An error occurred creating the form. See Exception.InnerException for detailes. The error is: Could not load file or assembly "Microsoft VisualBasic PowerPacks vs, Version = 9.0.0.0, Culture=neutral, PublicKeyToken=b03f50a3a' or one of its dependencies. The system cannot find the file specified.
The details displays this: See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
Exception Text
CODE:
JIT Debugging
To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled.
For example:
CODE:
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
This does not happen on all the forms within the app, just some. This happens on some systems running XP and the app runs fine on others running XP. So foar it has run on all systems running Vista. It happens some of the time on Windows 7
Any thoughts on what might cause a thread error like this?Error:InvalidOperationException was unhandledCross-thread operation not valid: Control 'Form1' accessed from a thread other than the thread it was created on.
Relavent Code:
Private Sub SerialPort_DataReceived(ByVal sender As System.Object, ByVal e As System.IO.Ports.SerialDataReceivedEventArgs) Handles SerialPort1.DataReceived
[code].....
have to say that, i got an error message when i finished publishig the project and then run it to another computer. Sounds either just in debugger problem or the way i connected and deployed my database called testMe.accdb is incorrect.Her's exact error message:ed exception has occurred in your application. If you click continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.'Could not find file 'C:Documents and SettingsAdministratorLocal SettingApps2.0Data2m00rzkj.q7t24497CHA.211haik..tion_809ead2214f990cb_0001.0000_e28c8a7595ad7f6Data estMe.accdb'.
View 1 Replieshave anyone experience this error? I try to share my project to the other computer and i got this error:
[Code]...
me and a partner need to play sounds when certain events occur, however, every method we try..
My.Computer.Audo.Play("file.wav")
or?
Sound.PlayWaveFile("file.wav") from this class: http:[url]....etc they all don't work
They do NOT throw any exceptions, they just dont play the music, the test demo of the Sound Class works like a charm, its just not working in our project..same with My.Computer. Audio. Play.what could we have done to make it so that we can't play sounds from our application?
PS: this problem occurs on all of the computers we test it on, yet the normal sound-playing methods seem to work on all of those computers when they are implemented in other projects.. its just not working in these instances
I'm making a program from witch one could run an application with different credentials.I can compile the program successfully, but when I press the button to run the program I get the following error: Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.The system cannot find the specified file.The code behind the button is as follows:
Dim myProcess As System.Diagnostics.Process = New System.Diagnostics.Process()
myProcess.StartInfo.FileName = "c:
un.bat /user:kreathyr c:getlogin.exe"
myProcess.Start()
Getlogin.exe does nothing but show the logged in username and run.bat utilizes the runas command.
i am using directx in my form but my program cant load managed direct(i instal Microsoft SDK V 9.29.1962.0) AND SHOW THIS ERROR:
Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.Mixed mode assembly is built against version V1.1.4322" of the runtime and cannot be loaded in the 4.0 runtime without additional configuration information.
What is the code that I can use to describe what happens when there is not just one exception in a'Try...Catch..Finally...End Try' statement? For example: 'Catch' is used to describe what happens when a certain exception occurs, but what can I use to describe what happens when a certain exception does NOT occur?
View 11 Replies[code]Is it necessary to close object when exception occurs? if yes please correct above code i m confused where to close the response object
View 3 RepliesI have an event which handles multiple controls. How can I tell which control caused the event? [code] I want to run validation on each control, (combo and textboxes) and if it succeeds, enable a button. I could do this for every control individually but I want to know if I can use the sender value to determine which control needs to be validated.
View 3 RepliesBackground: I wrote code that will output all the currently logged in User's Active Directory group names. I want the group name (ex: Acomp_user_BIG) via IdentityReference.Translate instead of the current user's SID's (ex: S-1-5-32-544) returned via IdentityReference.Value.
Here is code that I used:
Public ReadOnly Property Groups As IdentityReferenceCollection
Get
Dim irc As IdentityReferenceCollection
[Code].....
I have a combobox sub-routine that is triggered by either a "SelectedIndexChanged" or "Leave" event How can I determine which of the two events triggered the sub-routine
[Code]...
Is there any limit to the no. of handles assigned to an routine. Well actually my form form has about 80 controls and when ever the user press the enter key, focus must be to the next control. so can I handle all the 80 keydown events in one routine, or is there an better way.
View 3 Repliesit is clear that an Object handling an event has to unregister himself of that event before it ends, to avoid not been cleared from the memory by the CG - especially when it lives longer than the "Event Raiser" object. But, on the other hand, I wonder if it is possible to encounter this problem on the web server... Is it possible that the server will keep this object alive, even if the execution context (i.e. the web session) has died? Are'nt all the objects related to a session cleared with the session itself?
View 1 RepliesI tried to start using VB 2010 Express with a program I originally developed with VB 2005 Express that I moved to VB 2008 Express successfully a couple years ago. It uses a database file (*.mdf) that is on the computer ( not out on a server). When attempt to run the program in debug mode, I get the following error "An attempt to attach an auto-named database for file C:Documents and SettingsTomMy DocumentsQuizzing StuffQuestion Database 2010QuizQuest ionGameQuizQuestionGameinReleaseQuizQuestionDB.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share."
I first made a copy of the entire project folder that was working in VB 2008 Express and gave it a different name. In VB2010 I opened the project in the copied folder and it said it successfully converted the project. I am able to open the Data Source inthe Designer and see the database structure as I expect. I think the project is still using SQL Server 2005 Express (because it is what is checked in the list of prerequisites on the Publish tab).
Note, I have programmed off and on for many years, but fairly new to using databases and SQL Server.
I'm trying to get a save file dialogue to overwrite a file with the same name.
Private Sub Button6_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button6.Click
If RadioButton16.Checked Then
[code]....
I keep getting an error saying "Unhandled exception has occurred in your application." Then the next paragraph says "The process cannot access the file 'E:Copy of Release+Fontsob.txt' because it is being used by another process."