Use Edit-and-Continue On Vista/7 64-bit?
Oct 30, 2009
64 bit is a wonderful thing, except that MS currently has no plans to make a 64-bit IDE. However, you CAN compile your program to be 64 bit using AnyCPU or x64 compile options. However, by using either of those options, you cannot edit-and-continue.To enable edit-and-continue on an x64 machine, you must set your compile option to x86 in the Platform property of 'Project Settings > Compile'. If you do not have that option available, be sure that you select 'Tools > Options > Projects and Solutions > General > Show Advanced Build Configurations'.
View 2 Replies
ADVERTISEMENT
Feb 19, 2009
I'm writing in Visual Basic, using Visual Studio Standard 2008, targetting framework 3.5.When debugging, I pause code and edit it in my Startup Project, then continue running.Where the code moves into one of my non-startup projects, I am sure I used to be able to edit that code and continue running.Now, whenever I try and do that, I get a dialog stating that "Changes are not allowed when the debugger has been attached to an already running process", even though I can still edit code in the already-running startup project.All of my code is in VB, there's no weird language crossover thing going on. Why can't I edit-and-continue my non-startup projects?
View 6 Replies
Apr 29, 2012
Why can't I activate Edit And Continue? When I go into the Options, "Enable Edit And Continue" is checked but it's not allowing me to edit code at run time.
View 2 Replies
Oct 20, 2009
There are 2 ways we can add .vb files.We can add them as a link and choose not to copy. Or we can add them and copy.The way I did it in vb.6 is equivalent with add them as link and choose not to copy.Also what's the point of copying to target folder anyway? I want the original linked file to be updated when I change the file during debuging.
View 4 Replies
May 12, 2012
In the last day or two I've lost the ability to edit code while the program is running (and halted at a breakpoint).I also can't instantiate otherwise unused test variables for purposes of examination - I'm told they don't exist in the current context.Also System. Diagnostics.Debug doesn't work anymore.the error message generated when attempting to edit is :Changes are not allowed in the following cases:
- When the debugger has been attached to an already running process.
- The code being debugged was optimized at build or run time.
- The assembly being debugged is loaded as domain-neutral.
- The assembly being debugged was loaded through reflection.
I suspect that optimizations are being performed that are causing all this but I can't find where they are being set nor why they have changed.tools/options/debug shows that Edit and Continue is enabled although it is grayed out while the progarm is running. Windows 7, X86.
View 2 Replies
Apr 20, 2011
Opened a solution on which Edit & Continue worked in VB2008. Now at a breakpoint, editing of source code cannot be accomplished. No error messages - keystrokes are ignored. Any idea as to what we should do to get Edit & Continue.Price Brattin, SQLServer & SharePoint 2010 MCP, Microsoft Dynamics SL Consultant?
View 1 Replies
Jun 8, 2009
I've been using the vs2010 beta but I can't seem to get edit and continue to work.
Compile -> Advanced Options -> Target platform is set to x86 (Compile -> Platform is disabled and set to Active (Any Cpu)?).Options -> Debugging -> Edit-and-continue is checked but grayed out. Presumably for the same reason I can't debug.Options -> Historical Debugging is set to Events Only. Disabling it doesn't help.I get no warnings when trying to modify files while debugging, they're just read-only (shows a lock icon in tab).
What are some other options that might be disabling edit-and-continue?
View 1 Replies
Sep 20, 2011
I have a problem when i want to E&C on break mode.I turn off Optimized code generation but i still haved the problem!Here, Build>Configuration manager, when set configuration to release, i get an error like "Changes are not allowd when the debugger has been attached to an already running process or the code being debugged was optimized at build on run time". in Other Side when set it to debug, the breakpoints not be hit and have a error like "The breakpoint will not currently be hit.No symbols have been loaded for this document".I use Win7 x64,Visual studio 2008 and also set my project's platform target to X86?
View 4 Replies
Jun 22, 2011
It's kinda overkill (i7, 8GB, SDD, W7 x64) for what I actually need but it is supposed to last for a few years.For maintenance issues I had to install Visual Studio 2005 and it turns out that "Edit and Continue" wasn't working . I found a thread here HTML Code:[URL] in which I read that E&C is not supported in 64-bit OS.
View 2 Replies
Mar 14, 2012
I am trying to make a program that when run changes the <title> attribute of the HTML, on any page requested then loads the page (IE). Is this possible, without making a new browser? If so, how?
View 3 Replies
May 13, 2010
When using VB.Net (2008) and paused in debugging, Edit-And-Continue is a great time-saver. However if you change any module/class-level information (variable, sub/function signature, etc), you get the error message like this:
"unable to apply this change while debugging"
While I can understand the technical challenge to making this work (and why it would be hard), it leaves me in a tight spot with just a few options:
1) Restart and recompile and get the program back to the same state
2) Continue debugging without making the change, and risk forgetting
3) Type up a reminder note to make the change All of which are annoying.Now I know that option '4) Just actually make the change' may not be possible. but does anybody know how to enable the following 'technically easy' possibility?
4) Let me change the code, get it flagged with the purple squiggly underline, so I can save it, but just ignore the change until recompile
I have checked the Tools|options|debug|edit and continue, nothing appears to let me do this.
View 3 Replies
May 3, 2010
I'm not able to use edit and continue feature while debugging my project. I'm using VB 2008 Express Edition on a 32bit winXP version.
I already check on MSDN and found that this feature can be enable in dialog Tools/Options/Debugging.... However, I do not have a Debugging entry in the treeview in this option dialog. I also used to reset the Import/Export setting features in the tool menue. However this did not solve the problem as well. Then I tried to import some settings and I was able to select the option for debugging. However in the tools/option menu, the debugging feature is still not visible. Edit and Continue is not working as well
Its really a pain to debug with the current setup, as I always have to restart my application when I did some minor changes.
View 9 Replies
Dec 1, 2009
okay so i just installed win 7 clean version 64bit and installed vs 2008 on it i was loving my new 64bit OS up until i discovered i couldnt edit code in vb2008 while debugging and continue from where i paused.
then luckily i stumbled upon a place in program properties-->compile-->advanced compile options and i set it to x86 (instead of any) and it worked and i could use edit and continue feature as im used to it..2 questions tho
1st of all how do i make it by default for every project i create or open for the compile options to be x86?
2nd of all, im no programming guru, but i mean if i can edit and continue while debugging in 32 bit mode but cant while debugging in 64bit mode, and since its possible to make programs suitable for x86 and x64 at the same time, why oh why would cant the debugger simply debug in x86 mode and still compile the program as suitable for x86 and x64?
am i to understand that everytime i want to compile a program suitable for x86 and x64, i have to change the compile option to x86, completely be certain that im done with the editing of the program (which im never certain of), and when im ready to buld and release the program i have to change the compile options back to suitable for any (x64 and x86)?
View 1 Replies
May 30, 2009
i compile my form with the below code when i run it on vista work fine without any problem but when i try to run in on XP cant run... that happened with any XP machine.[code]when i run my exe to other Vista machines work fine... but on xp NO.
View 1 Replies
Oct 11, 2009
I am been working on an a small app that has a Forms.Webbrowser control that navigates to a Adobe Flash program. I have developed the app on Vista 32bit platform and have had no problems. I have sent the app to a couple of people to test out and one is using Vista 64bit and is running into a problem. I know the webbrowser control just uses the underlying base framework of IE. The problem on the 64 bit machine is when the site is navigated to it says that it needs to have Flash installed. When the user goes to Adobe's site it says they need to use a 32bit browser.
As stated on Adobe site here:[URL] the Flash player need to be in a 32 bit browser. What options do I have to be able fix this problem? Is there another control that I can use that would be the same in a 32bit platform and 64bit platform? Besides navigating to the Flash program, the browser also goes to standard web pages.
View 4 Replies
Apr 28, 2010
I have a form that adds new contacts. New contacts are added by pressing an appropriate button and they appear as an entry in the list on the form. I try now to add an edit button that will edit existing entries.User will select a given entry on the list and press edit button and will be presented with an appropriate form (AddContFrm).Right now it simply adds another entry with the same title. Logic is handled in a class called Contact.vb Here is my code.
Public Class Contact
Public Contact As String
Public Title As String[code]....
View 1 Replies
Jan 22, 2012
Program that will log in to a site and only if its correct, it will continue.?
View 1 Replies
Oct 16, 2009
Is there a code or command that i put in my code for the press any key to continue command to activate in my console application. I already know about press Ctrl F5 i want to if there is any code that I could implement at the end of my program that would do the same as pressing Ctrl F5 if the ran the program by press the play button.
View 1 Replies
Dec 31, 2009
I was given a half-finished project to finish. It was written in C++ using Visual Studio 2005.
Is it possible to somehow continue the project in VB.Net?
View 3 Replies
Dec 6, 2010
This is a easy one (i think) I am using MS access 2003 and. I am having problems continuing SQL statments to another line. I have been trying &_ and that doesnt seem to work with my SQL statements. How do I do this. I have some long SQL statments and it would be easier to break to another line, but I can't seem to do this. The statment below gives an error.
sqlz = "SELECT [Crosstab AUS].* INTO [AUS REQ] &_
FROM [Crosstab AUS]"
View 2 Replies
Jan 11, 2011
I have a 'For Each...' loop in the VB.NET code for one of the pages on my website. There is also a Try/Catch block within this code that currently contains an 'Exit Sub' in the event of an error being trapped. However, what I would actually like to do is to merely exit the current loop value and recommence the loop at the next value in the sequence.
How can I do this?
View 3 Replies
Jun 29, 2010
Im making a application where you need to click in the webbrowser before the button will be enabled, how to do it?
View 3 Replies
Nov 8, 2011
I am making a Tetris program and I have a 2d array 10 by 20 for the grid.I want the Tetris blocks I have created to move down one block every second unless the user presses "a" or "d" (to move left or right) then the block should move left or right whilst moving down.The problem is that I have created a loop for it to delay a bit but then it waits for the user to press a key until it continues the program. So the block will stop moving down and just stay where it is until they press something.I have been told that you can do this in C with something like if keyboardhit or kybd() or something then it will read the key but otherwise it will just skip that bit and loop round. So how can I do this in VB?
View 2 Replies
Jul 29, 2010
i would like to know if there is a Way that when an exception is thrown to let the program continue aftare the exception was thronw for example
try
line 1
line 2
[code].....
View 6 Replies
May 15, 2009
When you are putting in a long string of code it doesn't all fit, so I want to know if there is a way to continue that string on the next line. I believe it's something like & _ if I'm correct in thinking. But I'm not perfectly sure, I guess the question I'm asking is if you can continue a string with & _ or if it is something else.
View 6 Replies
May 3, 2010
I recently created a test VB.NET 2008 project with an Access database and it seems to work okay. It uses a dataset and table adapters. I'm aware that some people don't like table adapters. I'm willing to learn another way if it's better. Should I do this or continue using table adapters?
View 2 Replies
Aug 6, 2010
Following is an example how I am trying to use continue. Do Until oRSOracle.EOF sSql = " ....." 'Executing sql Set oRSDB04 = oConnDB04.Execute(sSql) If Not oRSDB04.EOF
Then continue ??? (how to use continue) end if loop
View 5 Replies
Jul 27, 2010
I want to know exactly how well I can depend upon the continued existence of VBScript. I am considering embedding VBScript in a computer system that I will be developing. Whatever scripting language that I choose must be interpreted, and it must have minimal object oriented support (it must have classes).
View 7 Replies
Oct 22, 2010
what if you created a pool of numbers: 1 - 21 and then chose a random selection from the pool? Something like the following:[code]This gets rid of those messy if statements and all of those loops.
View 1 Replies
Mar 5, 2009
I am using the MsgBox Function as a help on my program to notify users of unusable entries in my program. After the MsgBox pops up, and the user clicks on either 'OK' or 'Cancel', the program need to clear the box that the bad data was entered in, and continue with the program. What I am trying to do I guess is keep the program from returning unusable values by informing the user of entries that will return such values. But, where I am running into a problem is in when I click on OK or Cancel, the program continues as if nothing was called as a result of the MsgBox info being thrown.
Here is the code I have so far, mind you that I have used several of the other MsgBox codes to no avail.
I think what I need to do is have a line of code that calls my "textbox.clear" if certain criteria are met. but when I tried this, the program did not return to my GUI, it simply ran with a value of "0" in the "textbox.text" that the clear was called on.
View 6 Replies
