IDE :: Lost Edit And Continue Capability

May 12, 2012

In the last day or two I've lost the ability to edit code while the program is running (and halted at a breakpoint).I also can't instantiate otherwise unused test variables for purposes of examination - I'm told they don't exist in the current context.Also System. Diagnostics.Debug doesn't work anymore.the error message generated when attempting to edit is :Changes are not allowed in the following cases:

- When the debugger has been attached to an already running process.

- The code being debugged was optimized at build or run time.

- The assembly being debugged is loaded as domain-neutral.

- The assembly being debugged was loaded through reflection.

I suspect that optimizations are being performed that are causing all this but I can't find where they are being set nor why they have changed.tools/options/debug shows that Edit and Continue is enabled although it is grayed out while the progarm is running. Windows 7, X86.

View 2 Replies


ADVERTISEMENT

IDE :: Can't Edit And Continue While Debugging

Feb 19, 2009

I'm writing in Visual Basic, using Visual Studio Standard 2008, targetting framework 3.5.When debugging, I pause code and edit it in my Startup Project, then continue running.Where the code moves into one of my non-startup projects, I am sure I used to be able to edit that code and continue running.Now, whenever I try and do that, I get a dialog stating that "Changes are not allowed when the debugger has been attached to an already running process", even though I can still edit code in the already-running startup project.All of my code is in VB, there's no weird language crossover thing going on. Why can't I edit-and-continue my non-startup projects?

View 6 Replies

Use Edit-and-Continue On Vista/7 64-bit?

Oct 30, 2009

64 bit is a wonderful thing, except that MS currently has no plans to make a 64-bit IDE. However, you CAN compile your program to be 64 bit using AnyCPU or x64 compile options. However, by using either of those options, you cannot edit-and-continue.To enable edit-and-continue on an x64 machine, you must set your compile option to x86 in the Platform property of 'Project Settings > Compile'. If you do not have that option available, be sure that you select 'Tools > Options > Projects and Solutions > General > Show Advanced Build Configurations'.

View 2 Replies

Why Can't Activate Edit And Continue

Apr 29, 2012

Why can't I activate Edit And Continue? When I go into the Options, "Enable Edit And Continue" is checked but it's not allowing me to edit code at run time.

View 2 Replies

Edit And Continue With Linked .vb Files?

Oct 20, 2009

There are 2 ways we can add .vb files.We can add them as a link and choose not to copy. Or we can add them and copy.The way I did it in vb.6 is equivalent with add them as link and choose not to copy.Also what's the point of copying to target folder anyway? I want the original linked file to be updated when I change the file during debuging.

View 4 Replies

VS2010 - Edit And Continue Not Working?

Apr 20, 2011

Opened a solution on which Edit & Continue worked in VB2008. Now at a breakpoint, editing of source code cannot be accomplished. No error messages - keystrokes are ignored. Any idea as to what we should do to get Edit & Continue.Price Brattin, SQLServer & SharePoint 2010 MCP, Microsoft Dynamics SL Consultant?

View 1 Replies

Disabling Edit-and-continue In Vb10 Vs2010?

Jun 8, 2009

I've been using the vs2010 beta but I can't seem to get edit and continue to work.

Compile -> Advanced Options -> Target platform is set to x86 (Compile -> Platform is disabled and set to Active (Any Cpu)?).Options -> Debugging -> Edit-and-continue is checked but grayed out. Presumably for the same reason I can't debug.Options -> Historical Debugging is set to Events Only. Disabling it doesn't help.I get no warnings when trying to modify files while debugging, they're just read-only (shows a lock icon in tab).

What are some other options that might be disabling edit-and-continue?

View 1 Replies

IDE :: Edit And Continue On Break Mode( Vs 2008 + .net )?

Sep 20, 2011

I have a problem when i want to E&C on break mode.I turn off Optimized code generation but i still haved the problem!Here, Build>Configuration manager, when set configuration to release, i get an error like "Changes are not allowd when the debugger has been attached to an already running process or the code being debugged was optimized at build on run time". in Other Side when set it to debug, the breakpoints not be hit and have a error like "The breakpoint will not currently be hit.No symbols have been loaded for this document".I use Win7 x64,Visual studio 2008 and also set my project's platform target to X86?

View 4 Replies

VS2005 @ X64 Environment - Workaround To Enable Edit And Continue?

Jun 22, 2011

It's kinda overkill (i7, 8GB, SDD, W7 x64) for what I actually need but it is supposed to last for a few years.For maintenance issues I had to install Visual Studio 2005 and it turns out that "Edit and Continue" wasn't working . I found a thread here HTML Code:[URL] in which I read that E&C is not supported in 64-bit OS.

View 2 Replies

VS 2010 Intercept Web Requests And Edit <title> Of HTML Then Continue Request

Mar 14, 2012

I am trying to make a program that when run changes the <title> attribute of the HTML, on any page requested then loads the page (IE). Is this possible, without making a new browser? If so, how?

View 3 Replies

Edit-And-Continue: Ignore "unable To Apply This Change While Debugging"

May 13, 2010

When using VB.Net (2008) and paused in debugging, Edit-And-Continue is a great time-saver. However if you change any module/class-level information (variable, sub/function signature, etc), you get the error message like this:

"unable to apply this change while debugging"

While I can understand the technical challenge to making this work (and why it would be hard), it leaves me in a tight spot with just a few options:

1) Restart and recompile and get the program back to the same state

2) Continue debugging without making the change, and risk forgetting

3) Type up a reminder note to make the change All of which are annoying.Now I know that option '4) Just actually make the change' may not be possible. but does anybody know how to enable the following 'technically easy' possibility?

4) Let me change the code, get it flagged with the purple squiggly underline, so I can save it, but just ignore the change until recompile

I have checked the Tools|options|debug|edit and continue, nothing appears to let me do this.

View 3 Replies

"Edit And Continue" Doesn't Work With VB 2008 Express

May 3, 2010

I'm not able to use edit and continue feature while debugging my project. I'm using VB 2008 Express Edition on a 32bit winXP version.

I already check on MSDN and found that this feature can be enable in dialog Tools/Options/Debugging.... However, I do not have a Debugging entry in the treeview in this option dialog. I also used to reset the Import/Export setting features in the tool menue. However this did not solve the problem as well. Then I tried to import some settings and I was able to select the option for debugging. However in the tools/option menu, the debugging feature is still not visible. Edit and Continue is not working as well

Its really a pain to debug with the current setup, as I always have to restart my application when I did some minor changes.

View 9 Replies

VS 2008 X64 "Edit And Continue"?

Dec 1, 2009

okay so i just installed win 7 clean version 64bit and installed vs 2008 on it i was loving my new 64bit OS up until i discovered i couldnt edit code in vb2008 while debugging and continue from where i paused.

then luckily i stumbled upon a place in program properties-->compile-->advanced compile options and i set it to x86 (instead of any) and it worked and i could use edit and continue feature as im used to it..2 questions tho

1st of all how do i make it by default for every project i create or open for the compile options to be x86?

2nd of all, im no programming guru, but i mean if i can edit and continue while debugging in 32 bit mode but cant while debugging in 64bit mode, and since its possible to make programs suitable for x86 and x64 at the same time, why oh why would cant the debugger simply debug in x86 mode and still compile the program as suitable for x86 and x64?

am i to understand that everytime i want to compile a program suitable for x86 and x64, i have to change the compile option to x86, completely be certain that im done with the editing of the program (which im never certain of), and when im ready to buld and release the program i have to change the compile options back to suitable for any (x64 and x86)?

View 1 Replies

Why There's No Block Comment Capability

Feb 4, 2010

Does anyone know why there's no block comment capability in VB .NET? (Unless there really is

View 4 Replies

C# - Directx Basic Capability Testing?

Apr 6, 2009

I have a managed directx 9.0c application that fails to run on some low spec machines (ones without graphics card).I am wondering if anyone has any suggestions with regards to the minimum directx caps to test for so that I can catch a potential failure before trying to run the application.The directx application only displays a few meshes and a couple of textures and nothing too intensive

View 1 Replies

JSON Stringify And Parse Capability For VB

Aug 11, 2009

I looked on the JSON.org website but I couldn't find any JSON library for Visual Basic .NET, does one exist?

View 4 Replies

Resume Capability With System.net.webclient

Apr 15, 2011

I want to make a download Manager with resume capability (dont refer me to codeproject examples which use httpwebrequest and webresponse classes) i want to make the use of system.net.webclient class. I know it can provide me with events and stuff but is it possible to resume our downlaods with this class ?

View 6 Replies

Count Down Timer With Resume Capability Even The PC Is Shutdown

Oct 20, 2011

i want to create a program that has a countdown timer for a specific time month/day/hours with resume capability...

[Code]...

View 1 Replies

Intelligent Combo Box With Type Ahead Capability?

Mar 29, 2012

I am writing a windows application in VB.Net.

My client wants an intelligent combo box with type ahead capability. For example let's I have a list of companies. I want to find my company "MetaPro". With the Microsoft combo box if you type in the first letter of the name it will bring up first one starting with that letter. For example I type in "M" it will bring up "Mass. Dept. of Ed.", I then type in "E" I get the first one starting with "E" maybe "E, G & G" where I want the first one starting with "ME".

Perhaps there is an open source solution to this or I could create a custom control. But I don't know how.

View 1 Replies

Win32 API A Good Approach For Use With USB Communication Between VB2005 And A Microcontroller With USB Capability?

Feb 17, 2011

Is Win32 API a good approach for use with USB communication between VB2005 and a microcontroller with USB capability? If so where can I find these APIs?

View 2 Replies

DB/Reporting :: Add Data-entry Capability To My App Using Password-protection User-access

Mar 8, 2009

I'm presently creating an application which uses Access2007 as the database. No problem there. But Since most use Excel for data-entry, i've created two tables in access linked to excel source file. Any change in excel will reflect in Access database and subsequently in my Application . Until now my application only reads the database and displays records in DataGridView. These records, i then export to excel along with other formatting for direct printing as a report as I have no idea how to make report. Now i want to add data-entry capability to my app using password-protection user-access. So i can directly add new record to source file. Also need to know if There's any way of eliminating Access from the picture entirely....

View 1 Replies

File I/O And Registry :: Use The Bitmasking Capability Of The FileAttributes Enumeration To Indicate Which Attributes Changed?

Nov 18, 2009

I've got an issue with an Access97 replicated database that I'm writing a small monitoring app for. I've got FSW's to track changes to the necessary files, but am having some issue in enumerating exactly what has changed in some instances, specifically when attributes may have changed. I'm using a similar strategy to track this as I did for changes in size. I've got a Private class variable for the size of each file and a local method variable and compare the two, when different, update the class variable for the next comparison.

[Code]...

View 2 Replies

Data - Add An Edit Button That Will Edit Existing Entries?

Apr 28, 2010

I have a form that adds new contacts. New contacts are added by pressing an appropriate button and they appear as an entry in the list on the form. I try now to add an edit button that will edit existing entries.User will select a given entry on the list and press edit button and will be presented with an appropriate form (AddContFrm).Right now it simply adds another entry with the same title. Logic is handled in a class called Contact.vb Here is my code.

Public Class Contact
Public Contact As String
Public Title As String[code]....

View 1 Replies

Asp.net - Integrate Ckeditor File Upload And File Browser Capability?

Dec 8, 2011

I am trying to integrate the ckeditors file browser and upload image tools, i have managed to set the ckeditor to allow you to click on the browse file button and upload tag but how do i use ASP.NET VB to open the file browser and make the upload image work?

I am using the .NET 3.6.0 version where they provided the DLLS

View 1 Replies

Adding Windows Explorer Capability To A Windows Form App?

Aug 27, 2010

So i am having a bit of a problem.. What i want is for my application to show the panel in the from to display a windows explorer selection.. Look here

You see the panel 2 in here... Well the panel 2 needs to display this...

Is this possible you know like with a library or an extension or something.. Or do i need to make my own System for viewing files..???

View 1 Replies

Log In To Continue?

Jan 22, 2012

Program that will log in to a site and only if its correct, it will continue.?

View 1 Replies

'Press Any Key To Continue'?

Oct 16, 2009

Is there a code or command that i put in my code for the press any key to continue command to activate in my console application. I already know about press Ctrl F5 i want to if there is any code that I could implement at the end of my program that would do the same as pressing Ctrl F5 if the ran the program by press the play button.

View 1 Replies

Continue C++ Project In .Net?

Dec 31, 2009

I was given a half-finished project to finish. It was written in C++ using Visual Studio 2005.

Is it possible to somehow continue the project in VB.Net?

View 3 Replies

Continue SQL On Next Line?

Dec 6, 2010

This is a easy one (i think) I am using MS access 2003 and. I am having problems continuing SQL statments to another line. I have been trying &_ and that doesnt seem to work with my SQL statements. How do I do this. I have some long SQL statments and it would be easier to break to another line, but I can't seem to do this. The statment below gives an error.

sqlz = "SELECT [Crosstab AUS].* INTO [AUS REQ] &_

FROM [Crosstab AUS]"

View 2 Replies

How To Continue 'For Each...' Loop

Jan 11, 2011

I have a 'For Each...' loop in the VB.NET code for one of the pages on my website. There is also a Try/Catch block within this code that currently contains an 'Exit Sub' in the event of an error being trapped. However, what I would actually like to do is to merely exit the current loop value and recommence the loop at the next value in the sequence.

How can I do this?

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved