Is there a way to use INotifyPropertyChanged with auto-properties? Maybe an attribute or something other, not obvious to me.
public string Demo{
get;set;
}
For me, auto-properties would be an extremely practicall thing, but almost always, I have to raise the PropertyChanged-event if the property value has been changed and without a mechanism to do this, auto-properties are useless for me.
It seems like overkill to set the value of a nullable type and implement iNotifyPropertyChanged. Is there a better way of doing this?
[Code]...
Given the two classes below, can I map the ApplicationSettings to the AppSettings?
Mapper.CreateMap(Of ApplicationSettings, AppSettings)()
Mapper.Map(Of ApplicationSettings, AppSettings)(ApplicationSetting.Load)
Public Class ApplicationSettings
[code].....
I'm going to resolve this bug as "Postponed" as we won't have time to do it for VS2010, but I'm definitely interested in your feedback going forward.
View 6 RepliesI recently finished a class that we're using to tie Access to some WCF Services. Of course this means that the .Net classes (and all of their properties) need to be visible to COM. Given that I'm using VB10 and the Contact class has about 20 properties I went ahead and used auto-implementing properties.Much to my surprise, the properties were not accessible from within VBA in Access. I tried marking the properties as ComVisible (which I didn't have to do in the past with standard properties) and it still didn't work. After changing the auto properties to standard properties everything worked.
Became
Public Property FirstName As String
Get
[code].....
in C#: public string Property { get; private set; } in VB?
View 3 RepliesI have a public property, "Status" that is an enum. I have a setter method that changes the status and raises the PropertyChanged event. However, the WinForms user interface is not properly updating. I'm pretty sure it's because Status is an enum. Although I was thinking enum was a reference type but I guess it's a value type. Does INotifyPropertyChanged work the same with reference and value types?
[Code]...
I am working on an ASP.NET project where I use VB.NET within Visual Studio 2010. Some of the other developers on the project are using Visual Studio 2008. We all check our code into single SVN repository. I would like to start using Auto-Implemented Properties within VB.NET ...
Property FirstName as String
instead of ...
Private FirstName as String
[code].....
My concern is that this could mess up things for those using VS2008. What would happen if someone using VS2008 needed to modify my class that made use of Auto-Implemented Properties? I am assuming that since everything compiles down to IL code then there would be no issue in binary compatibility. Though a problem would arise when editing source.
I have somehow managed to disable auto-implemented properties in my VS2010 IDE how to turn it back on. Almost every article on the internet loves to explain auto-implemented properties but doesnt give you the crucial option of how to turn it on or off.
View 2 RepliesOkay say we have a class that implements INotifyPropertyChanged and a property that has code in the setter to raise the PropertyChanged event. On the GUI side we have a text box with the code:
txtFirst.DataBindings.Add("Text", p, "FirstName", True) Where p is a Person object and FirstName is the property that raises the PropertyChanged event.
[code].....
I have lost the auto hide option (greyed out) on the drop down solution and properties menus. The Toolbox still has the auto hide option. I cannot find the pin to set auto hide on the Solutin and Properties menus.
View 3 RepliesI have a class, Vehicle. I created two child classes, Car and Plane. I want to monitor the speed, which is a Vehicle Property, and bind it to a control (label, or image, for example) in WPF. When i create a static Class which only purpose is watching the Speed Property, it works, as far as the INotifyPropertyChanged is declared with the Speed Property name.
But the problem is, I have to create dynamicly multiple Cars and Planes by looking in an XML file and deserializing my objects, and creating multiple Car or Plane UserControl (Let's not discuss this way of working, please). So I have to get the Speed property inside the Vehicle Class (which is normal), and I have to get a INotifyPropertyChanged on each Speed of each Vehicle Created. So, my Cars and Planes are loaded, and I have to get all speeds, but I can't create a static Speed property by Vehicle. By the way, by creating a non-static Speed property (as int, for example) in Vehicle Class with INotifyPropertyChanged raised in the setter, it does not work. The event seems to be raised, but my converter is not fired, and my controls does not update.
In my Vehicle Class
Private SpeedValue As Integer
<XmlIgnore()>
Public Property Speed() As Short
Get
[Code]....
The PlaneView Class is almost the same for this part.
I confirm that the converter is fired just once, the first time, when the tabs are created, because I put a breakpoint on the Convert function definition. After that, the converter is never fired again. So the picture img_fonctionnement is displayed, but it is never updated. But the Speed property is updated, I swear. And the INotifyPropertyChanged (in Speed's setter) is raised, as far as i know with the help of the debugger.
And the "an item with the same key has already been added" (which appears in a messageBox, and not as an exception) seems to appear only when I am to long with the debugger. In normal execution mode, it never shows.
I'm seeing a strange build bug a lot. Sometimes after typing some code we receive the following build error.
Class 'clsX' must implement 'Event PropertyChanged(sender As Object, e As PropertyChangedEventArgs)' for interface System.ComponentModel.INotifyPropertyChanged'.
And
'PropertyChanged' cannot implement 'PropertyChanged' because there is no matching event on interface 'System.ComponentModel.INotifyPropertyChanged'.
Those error should never go together! Usually we can just ignore the exception and build the solution but often enough this bug stops our build. (this happens a lot using Edit and Continue which is annoying)Removing the PropertyChanged event and retyping the same code! sometimes fixes this.We're using a code generator that causes this error to surface but just editing some files manually triggers this exception too. This error occur's on multiple machines using various setups.
[code]I want to make the Properties Window to update the properties for X and Y at each MouseMove, so they become immediately visible for the user.
View 2 RepliesI'm making a control and I am trying to finalize my design time properties grid. I have several List(of Class) items as public properties and when I click on the design time menu (while testing the control) there is the word "Collection" and a button with an ellipsis (...) that brings up a neat pop up with the buttons Add/remove and all of the public properties of the collection's class on the right hand side. Basically for a non-collection instance of a class (with public properties) I'd like a similar button to show up. I know I could put all of the properties in the main control class and group them, but I like the pop up box feature. Anyway to duplicate this? (think font grid item etc.)
View 3 RepliesIn the form design I set up a TableLayoutPanel, 20x20 cells and in cell (1,1) a PictureBox (called Target) containing the image of a small target. The properties box for Target shows some very promising properties, Column and Row - and if you overwrite the values in the properties box, the PictureBox obligingly shifts to the corresponding cell position in th design. However in VB it is not possible to refer to Me.Target.Row or .Column - neither appears during coding in the menu of properties, and deliberately coding either of them produces an error like
Error 1 'row' is not a member of 'System.Windows.Forms.PictureBox'.
1. Why does the properties box show properties that cannot be altered programmatically?
2. How can my program move Target around in the TableLayoutPanel?
I am trying to just write something to a cell in a sheet and I am getting the error message:
Exception Exception from HRESULT: 0x800A03EC Stack Trace: at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
[code].....
Is there a way to expose a UserControl's properties to the Properties Window in the Designer?
View 3 RepliesI'm working on a Hazardous Materials label printing program. One of the options is to do an "NFPA" label. Since there are 4 values required with 4 or 6 options, the ratings are entered via radio buttons in a group box. That's working okay. I display values in the NFPA diamond as they're entered: left quadrant blue, top quadrant red, left yellow, bottom red. I'm having trouble with the label in which the rating will be displayed on top of a jpg diamond for the white. In this quadrant the text can be up to 4 characters. I can accept the text going into an adjacent block a little, but the corners of the label overlap into another quadrant/color. I reduced the font size which solved the overlap problem but the font is then too small and looks terrible. I tried to make the background of the label transparent to let the color come through correctly but that's not a valid value for label.background. I'm figuring that the transparent background is the best solution. What can I use that will accept a transparent background so the color shows through?
I'm trying to set the transparent property via label properties properties, not via code. Here's the code if it makes any difference:
Public Class NFPA
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Close()
End Sub
[code]....
How to change all properties of a form to properties of other but don't change important properties like Owner,Handle, OwnedForms, Parent,HasChildren,Controls and ... .I have a child form that i want it to provide controls of Form.The background form provides Aero frame and child form is a transparent form in it.I want it because I want to draw buttons with system style in Aero in Windows Forms.This is my own code but it does not work good (ForeForm is child form):
For Each Propertry In ForeForm.GetType.GetProperties()
Select Case Propertry.Name
Case "AeroBackgroundEnabled", "FormBorderStyle", "TransparencyKey", "Parent", "Owner", "ShowInTaskbar", "Handle", "HasChildren", "OwnedFo[code].....
Additionaly:I wrote a great Aero Form.I don't publish current version (1.2) that supports Aero Blur,RealTime Aero Color change,extend Basic theme?
All functions done, but the main function, the autorun and auto hide didnt work like i wish. for this keylogger, im using checkbox to make it autorun when windows startup and another checkbox to autohide. i already placed the codes but nothing happen. when i tick those checkboxes n restart my pc, nothing happen. is it because im using checkbox?
View 3 RepliesI have my own class of graphic objects, and now I'd like to allow a user to right-click on one of those within the application and see a properties window. Is there a pre-built dialog or control for displaying properties at runtime? I'd like to have something just like the IDE properties window button for my application.
View 4 RepliesPublic Class LOA
Private Sub PrintDocument1_PrintPage(ByVal sender As System.Object, ByVal e As System.Drawing.Printing.PrintPageEventArgs) Handles PrintDocument1.PrintPage
[code].....
I am new to VB and am trying to get my webbrowser1 auto refresh on a web page every few seconds. Is there a way to program a button to do this? I am also trying to get the browser to auto select "yes" when a radio button is present and then auto click "yes" on a message box when it pops up. Any ideas where to start?
View 2 RepliesWhat I've done is create a User Control Library (Project) and I've added a single User Control to that project. The control contains a single FlowLayoutPanel, and I created a Property on the control itself to pass the FlowDirection from the Control to its FlowLayoutPanel child.
Build, reference, component appears in the Toolbox and everything works fine, but the property on the control does not appear in the Properties window when I go to edit it at design time.
I have a BLL class which contains properties for the fields in a Country table (CountryCode, CountryName, etc). It also has a property ioDAL, which is a reference to a DAL class (created with SubSonic 2.2), which has same named fields.
I have a LoadRecord() method which calls the DAL's FetchById() method that populates the DAL properties by calling the database (SQL Server 2005 FWIW).What I then want to do, rather than writing code to populate each BLL property from its DAL equivalent, is to use AutoMapper (from CodePlex). I think the line should be something like
Mapper.CreateMap(ioDAL, Me)()but this gives errors "Value of type (DAL class / namespace naming) cannot be converted to 'System.Type'" and "Value of type (BLL class / namespace naming) cannot be converted to 'System.Type'".
[Code]...
I think that we can specify or import our properties that we wish to use in the project in the .vbproj file of our project.
And.. if so, how will I use these in my VB source code... ?
I want to keep the table names, connection strings, etc in the properties file.
I've populated a PropertyGrid with a custom class. How do you create and display a sub property similar to Size (Height, Width) which has two values or Point(X,Y)? For example, the class is Test and the property is Item as string. I want to expand Item to have two sub properties, A and B.
View 1 RepliesSay I have a function "client.GetItems" that returns a list of items. Each item as a Property named "Id" as Integer. Instead of doing this:[code]Is there a easier way to do it? Like with 1 line. I couldn't figure out how to use "Contains" with properties.
View 17 RepliesI am using an array with four elements and I need to know how to do the get / set properties in the vb 2008 syntax.
When I try the above I get the error 'no longer supported. use the new property declaration syntax"
When I create a new instance of the class I would like to be able to set what is in each element in the array inside the form.
Here is what I have, without the finished get / set properties:
Public Class StdCondition
Public FilePaths(3) As String
Public stdImageList(3) As ImageList
[Code]....
So how would I set what goes into the array after I have created a class?
Background info: I need the array to store filenames (as strings) that point to images located on the hard drive. I will then use the imagelist, populated with the filenames from the array, to display the images on the form. (I hope to add the images to the image list with code inside my form)