I want to vary a textbox's name using a variable. for example:
Dim IndexInteger as Integer
Dim TextBoxNameSrting as String
Do Until IndexInteger =12
IndexInteger +=1
TextBoxNameString = "TextBox" + IndexInteger
(TextBoxNameString).text = IndexInteger
loop
obviously this code doesn't work with (TextBoxNameString).text but it gives you an idea of what I'm trying to do.
Is it possible to have a datagridview on a datarepeater contol and, if so, heave the datagridview bound or filtered on two fields in the datarepeator, one of them an integer (an id) and one of them a date?
View 2 RepliesI am working on a custom control and i have it working for the most part, but what i want to do now is, on the form that i put my custom control, i want to fire an event when my custom control gets focus. so what i did was just added an eventPrivate Sub CustCont1_GotFocus(ByVal sender As Object, ByVal e As System.EventArgs) Handles CustCont1.GotFocusthe problem is, is that when i put a breakpoint on this line i never hit the breakpoint. is there something special i need to code in my customcontrol to fire the gotfocus and lostfocus events?
View 13 RepliesDoes any know a good version contol for vb.net 2003 or vb.net 2005?
View 3 RepliesI have a textbox in a tab control and iv'e coded the textbox_leave event to show a msgbox and reselect the textbox if the text doesn't meet certain conditions.
Private Sub TextBoxChaseTime_Leave(ByVal sender As Object, ByVal e As System.EventArgs) Handles TextBoxChaseTime.Leave
If IsDate(Me.TextBoxChaseTime.Text) Then
Me.TextBoxChaseTime.Text = Format(CDate(Me.TextBoxChaseTime.Text), "hh:mm")[code].....
(Reselecting the textbox is the only way i can find to efectively cancel the leave event - is there another)
I've also added a line to also reselect the tabpage incase the textbox_leave event was triggered by selecting a different tab in the tabcontol.However, when the textbox_leave event is triggered by the user selecting a different tab the textbox_leave event seems to be triggered several times displaying the msgbox four times.why this is, but it seems to be caused by the by the line that reselects the tabcontrolhow to stop the msgbox being shown more than once Interestingly, if i add a line to change the text in the text box to meet the conditions the msgbox is only shown once, but the tabpage is not reselcted
My program is half a formulator, and half ordering system. Where I get stuck is the ordering system part. In one screen I have 5 check boxes that you can check for which products you want to order. The products you checked then get sent to another screen and put into a list box with a quantity variable that starts at 1 attached to it. Now, if you check the same product again, another time through the program, as of now, quantity accumulates to 2, which is good, that's what I want. My problem is I want quantity to keep accumulating, right now it accumulates to 2, then on a third pass through the program,it duplicates the entry, so now in the list box has the original product and quantity of 2, and another entry that has the product with quantity of 2. 't quite understand how they work. Here's the code:
Option Explicit On
Option Strict On
Public Class OrderRequest
[code]....
I have a (COM Interop based) ActiveX contol that I am trying to use with registration free com. When the control loads the control is inactive (does not responds to events, control not fully rendered etc).After much search I discovered that COM objects using reg-free-com use the miscStatus attribute to set the initial state to get correctly activated. I know how to use it with a comClass which corresponds to a native COM Object.
[Code]...
2) The COM client I am using is Visual FoxPro. If the (1) is not possible what can I do in VFP to activate the inactive ActiveX control. (I dont mind VB or C# input too if I can use it to find the equivalent foxpro)Currently I tried the following
this.AddObject('OleControl1', 'oleControl', 'SomeCompany.SomeOleControl')
this.OleControl1.AutoActivate = 3
this.OleControl1.Visible = .T.
this.OleControl1.SetFocus
But I the OleControl1 gets focus before passing events like mouse click to its subelements. So I have to click twice on it to do the necessary action, any time it does not have focus. I would like the control to act as if the "nouiactivate" of the miscStatus value is set.
3) Is there any other way of accomplishing what I want to do?
Hans Passant, here is the listing of current Assembly.dll.manifest. The formatting in the comment made it unreadable.
[Code]...
I am getting the error:"Range variable 'sender' hides a variable in an enclosing block or a range variable previously defined in the query expression."for this
Imports System.Data.SqlClient
Imports System.Linq
Public Class Form1
[code]....
I can select any other item from the table without the error. "sender" has the same properties as "receiver" in the SQL table.
I receive the error -
[Code]...
Public Class Form1
Dim x, c, number(0 To 19) As Integer
Dim s As Integer
[CODE]...
The variables in the brackets [example] do not actually have brackets in them in the original code. These are where the issues are. For both variables, it says, "The type for variable [variable] will not be inferred because it is bound to a field in an enclosing scope. Either change the name of [variable], or use the fully qualified name (for example, 'Me.[variable]' or 'MyBase.[variable]')." Now, I'm not entirely sure if this is a stupid question or not, as I'm used to VB '98 because that's what we use in my programming class at High School. let me know why this won't work.
-Note: The intention of this program is to continually loop the generation of numbers for this list until I tell it to stop. Button1 ends the program, Button2 generates the list one time only, Button3 is supposed to loop the generation of the list, and Button4 is supposed to end the loop, but not the program.
Say that i have the following code that parse about 20k records from the DB.
Code #1
vb.net While reader.Read()
list.Add(If(Integer.TryParse(reader(0).ToString, 0), Integer.Parse(reader(0).ToString), 0))
End While
And then another code which does the very same thing but it seems to be a little cleaner.
Code #2
vb.net While reader.Read()
Dim storeowner As Integer = 0
Integer.TryParse(reader(0).ToString, storeowner)
list.Add(storeowner)
End While
This is what i am confused about; does the compiler creates a new variable automatically when i use the if statement without strictly declared variable? What approach is better in sense of performance?
I am looking for a good resource on variable naming conventions to illustrate variable type and where variables are declared. So I will have public variables, Private variables, private or local variables. I also may want to declare variables with the same name in different class code (i.e. in the code behind different forms). I am assuming good coding would dicatate a prefix for declaration location.
View 4 Repliesi have this error in the line of with xl.active......Object variable or With block variable not set.
Dim xl As Object
xl = CreateObject("Excel.Application")
With xl.ActiveSheet.QueryTables.Add(Connection:= _
"TEXT;C:Documents and SettingsUserDesktop429MEDICA2.TXT", _ Destination:=xl.Range("$A$1"))
[code]....
Now I have the need to get a current value from a bindingsource in a property of a user control.In a previous thread I had tracked down the "Object variable or With block variable not set" to the return in the Get block of a property. At the time I was only using the Set so I just commented out the offending code until I needed it.
[Code]...
The error does not occur during a system compile, only upon saving the container object of the user control. As I said the Set works correctly, only the Get causes the error.I would like to know what I am missing/misunderstanding and am open to other suggestions of handling retrieving the current value of a bindingsource in a user control.
Using Visual Basic 2008 Express. I need to pass a variable to another form. Or else make the variable visible to both forms.
View 4 RepliesI am using vb2008.net express,I test vs2005term it work, can any tell me what is the input variable and output variable of this terminal?how to catch the input and output variable to a textbox1 for sending and a textbox2 for receiving when I press send button? is that possible?
View 1 RepliesI have the following code that I am using to parse out a test file. I am getting variable conversion error in Sub Main() when I assign file = Read(). The return value of Read() is a TextFieldParser type. How do I assign the proper variable type to "file" so I can write the output to a text file?
Function Read()
Using MyReader As New FileIO.TextFieldParser("C:UsersColinDesktopParse_Me.txt")
Dim currentRow As String
[Code].....
I have the following code but I get blue squiggly line in cnn and when i point my mouse pointer on it i see this message "Variable 'cnn' hides a variable in an enclosing block"
Private Sub BtnLockUnlock_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BtnLockUnlock.Click
Dim IsLocked As Boolean = FpSpread1.ActiveSheet.DefaultStyle.Locked
[code].....
I have the following code passing a dataView variable to a function and I am getting the following warning:"Variable 'cl' is passed by reference before it has been assigned a value. A null reference exception could result at runtime."
Function Editclass()
Dim cl As DataView
Bindclass (SqlConnection2, cl)
[code].....
i had a class called Tag with a structure like:
public class Tag
private _members
public properties
public shared database_methods
end class
this class was tailored for mysql database. i'm currently adding access 2007 support so i split tag into tag and tagdata with structures like:
[Code]...
I'm having trouble tracking down what is wrong and causing the above error. This only occurs when saving the design view in VS 2012. The code builds and runs fine.Full error text:Code generation for property 'CompanyValue' failed. Error was: 'Property accessor 'CompanyValue' on object 'ContactViewUC1' threw the following exception: 'Object variable or With block variable not set."
CompanyValue definition in ContactViewUC:
Public Property CompanyValue
Get
[code].....
Been getting this error with my program. Using framework 2.0
[Code]...
I'm trying to enter automatically todays date in a number of records in the Table 'Applications' into the field 'Date_refund_request'.
However it is giving me the error 'object variable or withblock variable not set' in the line "Set rs = db.OpenRecordset(strSQL, dbOpenDynaset)".
The code is as follows:
Private Sub Command16_Click()
On Error GoTo Err_Command16_Click
Dim db As DAO.Database
[Code].....
I am trying to use this block of code to save attachemnts from Outlook into a folder on my harddrive.
VB
Imports Microsoft.Office.Interop
''' <summary>
[code].....
I have the following code but I get blue squiggly line in cnn and when i point my mouse pointer on it i see this message "Variable 'cnn' hides a variable in an enclosing block".[code]
View 2 RepliesSay I have something like this
Dim Level1 as Integer = 83
Dim Goal as String
Goal = InputBox(" What level is your goal?")
[code].....
I'm writing in ASP.NET 4 / VB.NET. I am querying an MSSQL database and sometimes have records come back with no results...so I enclosed the call I was making upon the results in an If..Else clause to set a default value if the database comes back with no results...but now I am getting this "Object variable or With block variable not set error". Here is the relevant code:
Dim clcfirst
Dim rhcfirst
Dim clcdate As Date
Code].....
What's the C# equivalent of
<% dim name %>
so you can use it for web forms in PayPal API integration?
why don't we declare a variable for instance variable with dim not private?
View 3 RepliesSo I can access an image by My.Resources.ImageName..But, that is manually-coded.What I want is to have my image name saved in a variable, lets call it VAR.
VAR = "IMAGE1.png"So I can do something like My.Resources.VAR which will return the IMAGE1.png image.Is that possible?