I used the unicode character manipultation features in my code under VB.NET 2003. Will the code still work on Unicode characters that have been added to the Unicode standard since 2003? I am aware that there have been some characters added to the Unicode standard for Persian text since 2004.
View 9 RepliesI have two textboxes (InputTextBox, OutputTextbox).In the InputTextBox, if I type "a" I need to display tamil letter "அ" in OutputTextBox.For the above requirements, I tried like below,
View 4 RepliesI am working on a sub that essentially needs to open a text file, and replace all instances of a certain character with a unicode character. I'm trying to do this by reading the original text file byte by byte, converting it to a character, and then either adding that character to a memory stream or writing the unicode character to the memory stream. Then I'm saving the memory stream to the original file.
[Code]...
In my VB.NET application I compare words that are recorded using IPA, many of which have many diacritic marks. In one of the comparisons, I compare the words character by character. But when I iterate over the characters, the diacritic marks come out as separate characters (as I would expect since this is unicode)However, a u character is different than a u plus an accent for the purposes of this program and needs to be distinguished.
View 1 RepliesWhat exactly is Unicode character in simple to understand, no-technicalities languange? Can you give me examples? What is the opposite of unicode character(s) and example(s).
View 8 RepliesI want to insert a special character into a RichTextBox. The character is in a Medieval Latin font (Andron) which is installed on my machine.
When I open MS Word and select Andron as the font, then go to Insert Symbol, then scroll down till I find the symbol I want, I see that its Unicode value is A752, selecting it inserts it into Word OK.
Now, back to my VB2005 project: I have a RichTextBox on my form, and the Font is set to Andron. I have two buttons on the form. Behind the first button I have this simple
RichTextBox1.Text = RichTextBox1.Text.Insert(RichTextBox1.SelectionSta rt, "a")
Clicking this button simply inserts the letter 'a' at the insertion point, fine.
Behind the second button I have this
RichTextBox1.Text = RichTextBox1.Text.Insert(RichTextBox1.SelectionSta rt, ChrW(&HA752))
However, on clicking this button I get the ubiquitous square symbol, as if it cannot find that character, which is odd (to me) as the correct font is selected for the RTB, and that code is the correct code for the symbol I want.
Edit to add: I can now see that all characters up to Ascii (Decimal) 255 (which equates to Unicode 00FF) all display OK, but any value over that does not.
AM doing a letter frequency analyzer program just like this website[URL]... but i don't know the right algorithm. Of course simple looping should work if it where just english letters, but the trick is it should work with unicode letters like arabic ,chinese etc.
how do i do this? if i can get sample code in vb.net or php, or an algol,
How to encode string and save using vb.net code? sound don't understand, right? let's say i want to save my string(contain unicode) to file like in NOTEPAD when you write unicode and save, you have to choose encoding = Unicode in order to see the same character when you open it later. I want to do this can any one tell me(i need code to encrypt string)?
View 1 RepliesCan I compare a char array with unicode Font file?I want to display in the richtextbox what are the characters are exits & not exists in that font file?
View 2 RepliesI have a problem with unicode character, as i create a database in SQL Server 2005. I want to query from a table that criteria fields are contain unicode character i.e NVARCHAR.
e.g: SELECT * FROM tblMyTable WHERE MyField='ភាសាខ្មែរ'. But when i did like this all rows that contain Unicode Character always display. it doesn't fit to my criteria
I have a TrueType font in my PC. And there are some unicode characters in it which I want to insert it into my RichtTextBox. The CharMap in WindowsXP shows the unicode character as U+00CC and to the right, it also displays the KeyStroke as Alt+0204So, how do I insert this unicode character in RichTextBox ? Also, if I'm going to distribute this small program along with this particular font, will this end system can easily display the unicode characters ? Or do I have to set any regional settings in that PC to
View 2 RepliesI would like to pass a whitespace character by using the System.Text.Encoding.ASCII.GetBytes(" "), and System.Text.Encoding.Unicode.GetBytes(" ") , where " " is the whitespace Character required. What do I need to type (" ") to get a whitespace character passed.?
View 6 RepliesI have a large piece of text in which there is something simular to this:!#_KT_#!COMMANDHERE!#_KT_#!I want, in VB.Net, to get the 'COMMANDHERE' part of the string, how would I go about doing this? I have this so far:
Dim temp As String = WebBrowser1.Document.Body.ToString
Dim startIndex As Integer = temp.IndexOf("!#__KT__#!") + 1
Dim endIndex As Integer = temp.IndexOf("!#__KT__#!", startIndex)
[code]....
In interface-based programming we normally define a set of functions inside an interface, and use that interface as a contract between 2 or more modules.What happens when we need to add more features to the system?How do we handle such system evolutions ?
View 2 RepliesI am thinking of giving mono develop a try. I have some questions. Visual Studio 2008 Professional has options for creating controls and services. This is not available in Visual Basic 2008 Express. This relationship between the different editions, is there something limiting like this with mono develop? I figure since it's open source, everything is implemented like Visual Studio 2008 Pro.
Another question. Does anyone have experience with mono. Is it a production level serious environment for commercial work? Is there something I should know about it?
Any mono developer that has anything good or bad to say, please drop a post in here. I would like to get as much info as possible from vbforums. This has always been the best help site for me using Visual Basic Express.
The most important thing, to reiterate is if I can make Windows Services with Mono Develop and if it supports full threading features that are limited or not available in express.
As a last question, what is the story on managed directx for mono. On Linux, there is no such thing, so would you plan an opengl library to start with? or does that work out in a different way?
How do I write an expression to calculate all characters of each row by my own defined value to each character = all the A and B and C and etc. will be as 2 and all I and J and whatever ... will be 1 so I need an end result of the total.
View 3 Replies[Code]...
For each character of this string I want a new character out of the string and then remove the character from the list of characters that still maybe used for other characters. It may not get the same character, you could basically just call this encryption, but it's not what I am making. I don't want to waste my time doing this one hour while VB can do this for me in <1 second.
[Code]...
list of URL for the web pages requested by the user should be maintained. The user should be able to navigate previous pages requested by clicking on the links in the History list. On the browsers start up, the History list should be loaded to the browser.
add history features in the web browser
View 2 RepliesI have a large .NET source tree (185 C# and VB projects, of which 60 are apps or websites) that i want to create a wix setup for. The general idea is to have 1 setup msi and to make each executable a feature, and to have each app be installed in a separate directory. like
%progfiles%/company/app1
/app2
/app3
[code].....
Some libraries are used by multiple apps, so the DirectoryRef would have to be pointing to multiple directories, and multiple DirectoryRefs (with different ids) would have to be pointing to the same directory (found directory alias trick), both of which seem impossible.I get the distinct impression I'm going about it the wrong way, or that I'm missing some deeper insight. (No suprise as my wix-fu is a full 3 days old)
Is there a way to disable visual basic 10 language features in VS 2010.our Dev team has moved to Visual studio 2010, but we still have to keep backwards compatibility with Visual Studio 2008. is there a way to disable the new language features to avoid any issues.
View 1 RepliesI was creating GTA SA save editer in c++ but due to less features in c++ I converted my whole code vb.net
Private Sub Save_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Save.Click
[Code]...
I even have it set up so I can filter through the DataGridView by sorting though a specific company in the database. However, now I want to link specific cells from the DataGridView to other VB features such as a text box and check box. I am a bit lost as to the coding. In the DataGridView, there are numerous columns that contain a check box and I need them to correlate to actual check boxes I have in the form. I can do it through binding the check box on the form to the data source and it works but if I run a filter or sort through the company, the check boxes from the DataGridView no longer carry over to the actual check box on the page.
View 10 RepliesI am more interested in the "Pan" feature. I haven't seen much on this so far.
View 5 Repliesi wanted to know what are all the GUI features available in VB.NET for creating a nice UI. The requirement is that, we have screens which were developed in VC++, and now we wanted develop the same screens from scratch, Is it just the way of Drag & Drop all the controls which were present in VC++ screens or something else is available there ?
View 1 RepliesI am writing a hangman type game and I am displaying the word to the user in a label as all *'s, but I cannot figure out how to have just one of the *'s changed in the label to the correct letter when the user inputs the correct letter into the text box and clicks the check letter button.Everything else in the program works perfectly, except for this part.[code]When I use the .Replace it changes all of the *'s to the correct selected letter.
View 2 Replieshow I can control the access of various modules of a program, based upon Active Directory group. The program uses windows authentication to avoid login, but the user ends up having to enter his or her password a second time in order to continue.
Public Function GetGroupMembership(ByVal username As String, ByVal password As String)
Return GetGroups("LDAP:mycomp", username, password)
[Code]......
I actually found a fairly good pong tutorial on this site which I've linked to at the bottom of this post. I used the code as my base and I'm starting to implement my own new features. I'm currently working on making the ball move faster after each hit of the paddle, but I can't get it working! I thought it would be as simple as adding 1 to the 'speed' variable during the test to see if the ball has hit the paddle. Doesn't work! I also tried various other methods, including adding an extra timer to the form and having the speed increase a certain number every tick on the timer. Didn't work! Is there some special way that I need to reference that variable in order to manipulate it? Code below.
[Code]...
Private cs As New SqlConnection("Data Source=ANKIT-PC;Initial Catalog=mrks_analysis;Integrated Security=True")
Private da As New SqlDataAdapter("select * from sbs", cs)
[Code].....
i used the above mentioned command to get data from db to my datagrid.
Currently the complete grid is editable.
i want that the Sno field to become non editable + and the rest rows i want a combobox from which user selects the data and which gets stored in db.
I am making my own custom tabbed browser and now i want the ExecCommands list. to add the copy or cut etc features.
View 5 Replies