AM doing a letter frequency analyzer program just like this website[URL]... but i don't know the right algorithm. Of course simple looping should work if it where just english letters, but the trick is it should work with unicode letters like arabic ,chinese etc.
how do i do this? if i can get sample code in vb.net or php, or an algol,
I have two textboxes (InputTextBox, OutputTextbox).In the InputTextBox, if I type "a" I need to display tamil letter "அ" in OutputTextBox.For the above requirements, I tried like below,
View 4 RepliesI'm trying to make this program that counts the frequency of each letter in the alphabet for a set of ciphertext, the calculation i want to do is:lettersum*(lettersum - 1) + lettersum*(lettersum - 1) for however many letters example: User puts aabbcc in the ciphertext box , the output should be
2(2-1)+2(2-1)+2(2-1) =6 If the user inputs aaaaab the output should be 5(5-1)+1(1-1) = 20 The code I have so far only counts the last number of letters for example: aabbcc only reads the cc part and only outputs 2(2-1) = 2 instead of 2(2-1) + 2(2-1) + 2(2-1) = 6.The code below is part of a button_Click item
[Code]...
I am working on a sub that essentially needs to open a text file, and replace all instances of a certain character with a unicode character. I'm trying to do this by reading the original text file byte by byte, converting it to a character, and then either adding that character to a memory stream or writing the unicode character to the memory stream. Then I'm saving the memory stream to the original file.
[Code]...
In my VB.NET application I compare words that are recorded using IPA, many of which have many diacritic marks. In one of the comparisons, I compare the words character by character. But when I iterate over the characters, the diacritic marks come out as separate characters (as I would expect since this is unicode)However, a u character is different than a u plus an accent for the purposes of this program and needs to be distinguished.
View 1 RepliesHow can i get Unicode letter name on a textbox like this on ms word and like the attached file
View 1 RepliesI have been trying to write code that asks the user for the size of an array , and then takes inputs from the array. They are characters A-E... Then I am to call a function that will count the frequency of A,B,C,D,E . Then it is supposed to send the information to a listbox. Eg. There are 2 A's,There are 0 B's, There are 5 C's..
I have the code for populating the array, but when it comes to searching it for the frequencies..This is what i have so far..
[code...]
developing a small program that will count frequency of each Arabic letter that appears in the string
View 5 RepliesWhat exactly is Unicode character in simple to understand, no-technicalities languange? Can you give me examples? What is the opposite of unicode character(s) and example(s).
View 8 RepliesI want to insert a special character into a RichTextBox. The character is in a Medieval Latin font (Andron) which is installed on my machine.
When I open MS Word and select Andron as the font, then go to Insert Symbol, then scroll down till I find the symbol I want, I see that its Unicode value is A752, selecting it inserts it into Word OK.
Now, back to my VB2005 project: I have a RichTextBox on my form, and the Font is set to Andron. I have two buttons on the form. Behind the first button I have this simple
RichTextBox1.Text = RichTextBox1.Text.Insert(RichTextBox1.SelectionSta rt, "a")
Clicking this button simply inserts the letter 'a' at the insertion point, fine.
Behind the second button I have this
RichTextBox1.Text = RichTextBox1.Text.Insert(RichTextBox1.SelectionSta rt, ChrW(&HA752))
However, on clicking this button I get the ubiquitous square symbol, as if it cannot find that character, which is odd (to me) as the correct font is selected for the RTB, and that code is the correct code for the symbol I want.
Edit to add: I can now see that all characters up to Ascii (Decimal) 255 (which equates to Unicode 00FF) all display OK, but any value over that does not.
I used the unicode character manipultation features in my code under VB.NET 2003. Will the code still work on Unicode characters that have been added to the Unicode standard since 2003? I am aware that there have been some characters added to the Unicode standard for Persian text since 2004.
View 9 RepliesHow to encode string and save using vb.net code? sound don't understand, right? let's say i want to save my string(contain unicode) to file like in NOTEPAD when you write unicode and save, you have to choose encoding = Unicode in order to see the same character when you open it later. I want to do this can any one tell me(i need code to encrypt string)?
View 1 RepliesCan I compare a char array with unicode Font file?I want to display in the richtextbox what are the characters are exits & not exists in that font file?
View 2 RepliesI have a problem with unicode character, as i create a database in SQL Server 2005. I want to query from a table that criteria fields are contain unicode character i.e NVARCHAR.
e.g: SELECT * FROM tblMyTable WHERE MyField='ភាសាខ្មែរ'. But when i did like this all rows that contain Unicode Character always display. it doesn't fit to my criteria
I have a TrueType font in my PC. And there are some unicode characters in it which I want to insert it into my RichtTextBox. The CharMap in WindowsXP shows the unicode character as U+00CC and to the right, it also displays the KeyStroke as Alt+0204So, how do I insert this unicode character in RichTextBox ? Also, if I'm going to distribute this small program along with this particular font, will this end system can easily display the unicode characters ? Or do I have to set any regional settings in that PC to
View 2 RepliesIn vb2008 is possible validating textbox for letter character only?
View 2 RepliesBasically, there are letters in welsh which act as one character e.g. "ch", "ng" and "ll". As you can see by the code, i am trying to do this with "ll" right now.
Dim s As String = Label5.Text 'easy enough to see what i did there.
Dim i As Integer = s.Length 'easy enough to see what i did there.
For i2 = 0 To i - 1 'declare the loop
[CODE]...
The problem is that the letter "l" gets read out, instead of the letter "ll". So theres my problem, what i need to do may seem simple to some, but i can't see how something like this would work.
I've written up the following code (please note i only started to learn VB yesterday)
CODE:
And what I want it to do is when a letter, or character, is entered, i want to have Label1 display "invalid" but i cant seem to figure out how...
Almost each letter of my mother tongue (Arabic) has two or more forms to be written with, due to its position (At the beginning, middle or end of a word) and what are the two letters before and after it, however, I've been trying to figure why when I type something in a textbox and use the AscW method to get the character code, it returns a code for the same character but not of the same form, which means:
If I type a word starting with the letter above, the letter would be in the initial form (its Unicode is &HFED3 = 65235) , but when I use the AscW to get the code of the first character it returns the code (&H641 = 1601) of the same letter in actually none of the previous forms but apparently in the isolated form (&HFED1 = 65233).I've also tried to convert the default encoding to the Unicode's but had no accepted result and no solution through reading the two Unicode bytes (which had to be [211, 254]).
P.S. I tried something else:
TextBox1.Text = ChrW(&HFED3)
Msgbox(AscW(TextBox1.Text(0)))
to check if the problem is the AscW method, but it worked just fine, I have another idea running through my mind but I'm still not sure about it .So, is there any way to detect the actual form of a Unicode character?
I would like to pass a whitespace character by using the System.Text.Encoding.ASCII.GetBytes(" "), and System.Text.Encoding.Unicode.GetBytes(" ") , where " " is the whitespace Character required. What do I need to type (" ") to get a whitespace character passed.?
View 6 RepliesI have a binary converter I am attempting to build and want to read and convert the InputTextBox(alphabetical characters) letter by letter however all I have so far is one letter at a time
Image here is the code I have so far:
Code:
Public Class ConverterForm
Private Sub OpenToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OpenToolStripMenuItem.Click
[Code]....
I am a vb newbie having some trouble with an assignment. A user enters a letter into a text box, and the output must make the letter uppercase and tell what position the letter is at in the sentence "The quick brown fox jumps over a lazy dog."
Here is my
Private Sub btnSubmit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSubmit.Click
[CODE]...............
This is what comes out: "A first occurs in position -1". Everything comes out except the position is always displayed as -1.
Is it possible to change to colour of letters as they are typed.I.e
Piece of text says
"Hello World"
when user types "H". The "H" in the original would change if matched and then so on and then when "Hello" is matched it would change to another colour.
I'm using a timer control to highlight text letter by letter one every second. Timer1.Interval = 1000 How can I give the user access to this variable so the speed can be changed?
View 7 RepliesI'm a VB beginner.I wonder if it's possible to change the text style letter by letter?I've learned here that you can change the entire style of text like
Dim myStyle As New Font(TextBox1.Font.Name, TextBox1.Font.Size, FontStyle.Regular)
TextBox1.Font = myStyle
[code].....
Is it possible to build a Frequency Generator in VB.Net? I would like to be able to select a frequency from a Combobox or a drop down listbox. And be able to save that frequency as a file as well as play the frequency.
View 3 RepliesA simple class that plays a tone of varying ampliture, frequency and duration through the PC's speakers:
Imports System.IO
Imports System.Media
Public Class Form1
Private Sub Button1_Click(ByVal sender As Object, ByVal e As EventArgs) Handles Button1.Click
Beep.Beep(1000, 1000, 1000)
[Code]...
This class uses SoundPlayer.PlaySync which has a 4 MB stream length limit, so the longest duration is 24000 milliseconds. You can try SoundPlayer.Play for longer durations, but allow plenty of time for it to complete.
I am looking to be able to do life frequency detection in VB.net. I must say I don't really know where to begin here. I have looked into BASS.net, but that seems to only work with pre-recorded audio. I need to be able to detect the frequency of audio coming in over the line in or mic input in near real-time.
View 2 RepliesI have an application in which I am analyzing a system where there are a large number of interactions. And I need to make certain choices based on the frequency of the occurrences of unique items in the system. For example, if you had this list of letters:A, B, F, G, A, T, S, B, S, B, S, Q, Z, B, Q, S..[code]The above is a tiny example, but I've attached an image which is a simple line graph of a larger system..In this graph the numbers along the bottom aren't really important. They are just marking the number of unique frequencies. And the Y-axis marks the value of that frequency. What I'm looking for is a mathematical/programmatic way to find the point where that line begins to break upwards. My searches haven't yielded what I'm looking for as I'm not really sure what the proper terminology is, or the name of the concept.Right now, we have to manually choose that point based on a human looking at the numbers and saying "here". But I want to, at the very least, already have a "recommended" value chosen, and at the most, be able to remove the human component completely.
For clarification, my current algorithm is producing a list of number pairs occurrence to occurrence frequency. My use of the word "frequency" in no way relates to electromagnetic signals, but rather to how often an occurrence occurs. But I thought that saying "occurrence occurrences" would be more confusing! In this system, the general trend is that a few entities will show up in a large number of interactions, more entities will show up in a medium number of interactions, but the greatest number of entities will show up in just a few, or even no, interactions. It would be tough to imagine a scenario where it was different than that... worst case would probably be a plateau. But there could definitely be a dip after a jump at any point from the beginning to the end. The illustration above just doesn't show that. We cannot assume that there will be a point where it will begin to rise with no drops afterwards.Ultimately what I'm trying to determine is the importance of an entity based on how often it occurs in the system. I need to be able to flag certain items as "important", but all items can't be important. And the method/algorithm I'm looking for would help to identify at what point in that list do I stop considering items important. If you look at the list, you can see where the lower occurrences start becoming more frequent. I don't think that I can sort on the right column because the left column is really the key data. Greater occurrences = more importance.
Edit 9-7-2011: I am still hoping for an answer for this question. There's been a couple of good they have ultimately not sent me in the direction that helped me get the answer.I have an application in which I am analyzing a system where there are a large number of interactions. And I need to make certain choices based on the frequency of the occurrences of unique items in the system. For example, if you had this list of letters:
Here is a list showing how often each letter occurs (occurrences):
A - 2
B - 4
[code].....