We are using visual studio 2008-My requirement is to allocate some memory, store data into that allocated memory and pass the memory address to a DLL written in C. But when try to pass this memory address to a function in that DLL my application crashes and shows the message "The memory could not be written".[code]...I'm getting the error at the last line.
View 1 RepliesI have a new problem with this same Form Printing project and I get exactly the same exception but from the different point of code:
line 538: d.PrintFunction(c, typePrint, mp, x, y, extendedHeight, ScanForChildControls)
The exception type is System.AccessViolationException and it says (after I translate it from my own language in which the message is given in my pc, into English):"Protected memory was tried to be read or written. This often indicates that the other memory is damaged"
I have to run a thread create in the code.In the form1 i have a button that run the new separate thread for elaborate some data, so i need it for not freeze the form.I have inizialized thread:
dim th as thread = new thread (addressof elaborate)
And at the button.click event:
th.isbackground= true
th.start()
Now, at the form load i have iconized my program, but when i start new thread the tray icon is duplicated from it. I want to resolve that when start new thread it's not show new notifyicon.
(i don't have found anything online, only Multiple notification icons appear when using multithreading)
Basically i want to know if the visual studio IDE and/or compiler in 2010 and 2012 was written to make use of a multi core environment (i understand we can target multi core environments in all versions using parallelism, but that is not my question).I am trying to decide on if i should get a higher clock dual core or a lower clock quad core, as i want to try and figure out which processor will give me the absolute best possible experience with Visual Studio 2010 or 2012 (v11) (ide and background compiler).
If they are running the most important section (background compiler and other ide tasks) in one core, then the core will get cut off quicker if running a quad core, especially if background compiler is the heaviest task, i would imagine this would be difficult to separate in more than one process, so even if it uses multi cores you might still be better off with going for a higher clock CPU if the majority of the processing is still bound to occur in one core (i.e. the most significant part of the VS environment).
If you match two same colours or pictures, you get some points. There should be nine pairs of hidden pictures/colours but shows up when clicked but should not in the same order or line. There has to be a count down timer as well.
View 3 RepliesI am using Visual Studio 2005 with Service Pack1 installed. I am working on VB.Net project. However I am constantly choked up even I am in editing mode, i.e., I am NOT in debugging mode. Here is what bothers me:
[Code]...
I am getting a System.OutOfMemoryException from my vb.net application, it happened from one certain user. I am trying to figure out whether my application takes too much memory space or the PC has low memory. But she just upgraded her desktop as i3 Intel CPU and higher memory.
[Code]...
I am trying to edit the process memory of a game (Age Of Empires II: The Conquerers). I can edit the memory manually on TSearch and it works just fine. I want to this with VB.NET but have had no luck. Note: I am not doing this to cheat, I am just using this as a learning experience for changing process memory.
[Code]...
whilst trying to debug a sample program, get error code bc 32400. Also error code Class 'CLSID_CorSymWriter' could not be created system error &H80040154&
View 3 RepliesThis is my first try of Visual Basic 2010 Express, though I have 10 yrs+ experience in VBA. I'm running Windows XP SP2 on a desktop pc with following installed: Visual Basic 2010 Express... just installed! SQL Server 205 Express ... been running on pc for 12 months I've created a new DB in SQL for my test application, but have not added any users or permissions to it as I'm using Windows authentication.
I've created a new Windows Forms Solution in VB2010EXP and tried adding a new Data Source for my new SQL DB, but it keeps giving error message about not having rights ot the db. 2 days of searching on the web has confirmed many others with similar issues, but no obvious solution. Eventually I find a few threads about permissions and moving the mdf into the root of the HDD, so try moving my mdf file up closer to the root of the Hard Drive msf was in C:Documents and Settings\_SharedDataApplication_DataMSSQL2005Data now in C:SQL2005Data
[Code].....
I'm trying to load a .ani file into a bitmap so it can be displayed on a control or on a form. The following code has been paired down from a short 'Download Sample' which I then edited to point to my .ani file. As indicated in the following code, I can load a .gif file, but I can't load a .ani file.
Here's my code:
Imports System
Imports System.Drawing
[CODE]...
WebMatrix is a web development and deployment tool by Microsoft so how is this compared to Visual Studio? which Use C# Razor Syntax is that more better coding.
[Code]...
I have a problem that came with the code conversion of a form-printing-project (available in the following url: http://www.codeproject.com/KB/printing/PrintingFormReport.aspx). I converted the project from C# to VB.Net. But there pops up a very strange exception in a specific part of the code in regard to the class usage that I cannot make out at all. The exception type is System.AccessViolationException and it says (after I translate it from my own language in which the message is give in my pc,into English): "Protected memory was tried to be read or written. This often indicates that the other memory is damaged".
And the part of the code where the exception comes is the following line:
[Code]...
I have to compile projects which was compiled in Visual Studio 6 in Visual Studio 2005. When i compiled i got a set of same error. I opened the project for VS6 by selecting File->open->project/solution and tried to build a solution by Build option but i am getting the following error.
[Code]...
Is it possible to open visual studio express files with normal visual studio?
View 2 RepliesI get the following exception when showing a form: InvalidOperationException was unhandled
Mixed mode assembly is build against version 'v2.0.50727' of the runtime and cannot be loaded in the 4.0 runtime without additional configuration information.
if I forget to enter a value in a cell in my gridview a loooong error who says thar that the indata format is wrong. anyone who know where in visual studio I can make this error a bit more understandable for others?
View 1 RepliesI am programming in VB9 WPF and Blend 3. I was working on a program in Blend 3; I can work on all my forms and everything runs fine in Blend, but when I opened it in VS the WFP forms would not display (I have five of them in my program and they all have the same problem in Visual Studio.), but I can run the program in VS, see the forms in run mode, and work on the code behind with no problem. I can't determine what is causing the WPF forms error in VS. It appears I have a "ResourceDictionary_4 error, but I cannot locate that dictionary in either Visual Studio or Blend. I even tried searching my entire computer and can't find any trace of it. Are there any ideas as to how do I solve this problem? The error messages I am getting are:
[Code]...
This morning I opened up my project The Bible Study Tool and got a pop up warning box that says the following: There is no editor available for 'G:VisualStudio ProjectsThe Bible Study ToolThe Bible Study ToolBSTMain.vb'. Make sure the application for the file type (.vb) is installed. I do not know how to 'make sure the application for the file type (.vb) is installed. I get same error no matter what solution (program) I try to open. I can see the forms code window, but when I double-click the form in the solution explorer I get the above warning.
[Code]...
I am frequently confronting this internal compiler error and have to close/re-open Visual Studio? What is causing this to happen?
View 4 RepliesI am writing a project and am getting stumped on the following error in Visual Studio. It reads "Warning 1 Unused local variable" and "Warning 2 Access of shared member, constant member, enum member or nested type through an instance; qualifying expression will not be evaluated"Here is snap of my code and the problem is highlighted. Any thoughts?Private Sub xmlImport(ByVal source As Object, ByVal e As FileSystemEventArgs)Dim eConnect As New eConnectMethods
[Code]....
I have a MouseEnter event which currently handles some custom controls on my form. The program is a card game. I have a collection (handCards) that gets populated when the user draws a card and then it adds the latest card to the form. This collection holds cards of various custom types, all which inherit from picturebox. Drawing the cards from the deck and adding them to the form works fine. The trouble I am having is that at runtime, after a card is drawn and added to the form, I've created an addhandler line of code to have those cards respond to my MouseEnter event, but my addhandler line of code is telling me that MouseEnter is not an event of object. How can I get around this so that after a card is drawn and added to the form, when the mouse enters the new custom control, my MouseEnter event fires? Here's one of the many things I've tried and what I think should be the simplest and easiest that should work.deck.DrawCard()AddHandler handCards(handCards.Count).MouseEnter, AddressOf Cards_MouseEnter
P.S. the MouseEnter event works fine for custom controls that are on the form prior to runtime and all it does is take the image of the control and enlarge it by placing the image to a bigger card on the form.
I installed the latest version of Toad yesterday. When I restarted Visual Studio 2008, the project that is my installation package for my application would not longer load. The message I get in the output window is "The Visual Basic Deploy Deployment Package ({CCD045E8-6236-4B3D-B820-97F7DD14C77C}) did not load because of previous errors." When I try to reload that project, I get the following error: " The operation could not be completed. No such interface supported" I tried to repair the VS installation, but that originally failed. The Deployment folder under Common7Tools was currupted so I ran check disk. A few bad files and clusters were found and corrected and the second run of check disk ran clean. I uninstalled Visual Studio and then reinstalled it, but am still getting the same error. I tried reinstalling .Net 3.5 before the reinstall of VS as well. I tried creating a new installation project, but that failed as well.
View 1 RepliesI have a large solution which contains a mixture of C# and VB.Net projects.If I get compilation errors because a project which several other projects depend upon fails to build, it is very hard to see the actual error(s) because of the number of VB errors in the error list window in Visual Studio. C# errors found in the projects I compiled show in the error list, but all VB errors appear (including in those projects I have not just compiled).Is there any way of turning off this behaviour so that VB errors only appear for projects that I have explicitly compiled?
View 1 RepliesTell vb.net equivalent of following:
C# Syntax
public class AuthorList : Control
{
[CODE]...
Which on build in visual studio 2008 gives an error.
I get this error message when I try to run an applocation that I upgrade from VB6 to Visual Studio saying :
System.IO.FileNotFoundException: File or assembly name Microsoft.VisualBasic.Compatibility, or one of its dependencies, was not found.File name: "Microsoft.VisualBasic.Compatibility"
ften Restart. I have install SP1 version and full Key. but i dont know that ?
View 3 RepliesI want to ask a queation about this following error;Error Visual Basic compiler is unable to recover from the following error: Not enough storage is available to complete this operation.
View 13 RepliesMy nightmare had been back again ".NET Framework Initialization Error "I make a program in basic language but when I want to run the program out of visual studio IDE this Error appears for me : the title : " .NET Framework Initialization Error" the body : "Unable to find a version of the runtime to run this application."
View 2 RepliesI recently got into this article. It makes a chat server and people can connect to it like an AIM. The problem how would I disconnect from the server from the client. Because if I close the client application when its connected to the server it will crash the server as well. Please let me know if anyone has any solutions.
View 1 Replies