i am facing a problem i.e when i open crystal report its open in maximized state which is set on load while i open another form its also open in maximized state where the form state set normal from property box any solution where crystal report form open in maximized state and at the same time another form open in normal state i.e its default state
View 4 Replies
I'm trying to open a crystal report and have the datasource to be a data set but i'm having some problems. here's what I got so far:
My application is using a sqlCe database. On form1, I dragged the dataset, from the datasource tab, onto the form. when the user clicks a button on form1, this is called:
Dim rpt As New WorkLink_Application() 'The report you created.
Dim MyCommand As New SqlCeCommand()
Dim myDA As New SqlCeDataAdapter()
[Code].....
on the crystal report, i went through the database expert wizard and selected the dataset from Create New Connection-->ADO.Net. I then dragged a field from my table onto the report. When the report is opened, though, the field is not shown.
I have a vb.net 2008 project . when i open this project in my labtop is very slow loadin , open a form design
View 1 RepliesI m using .net , I create some temporary tables at run time, how to print these table data thru crystal report
View 1 RepliesHow to check weather the window is currently maximized or restored. I want to do something like if window state maximized then border none and if window state regular, then form border style sizable. This is what I wrote
[code]...
I have a datagridview with below column and i have button for each row and when button is clicked i would like to take the LogId, start date, end date and log date and pass it as parameters to crystal report and run the report using these parameters and display the report.i have designed the report separately in crystal reports, can i use that or i need to design it in Visual Studio.how do i pass parameters, run and display results of the report when button on datagridviewbutton column is clicked?
View 1 RepliesI'm having a lot of trouble with the windows in my application to size correctly. As a sample, I have a container form (mdi parent), with in which is Form1 (with a datagrid) and a form that is only called when a cell in the datagrid is double clicked. I want Form1 to always be maximized so I set the properties as follows:
Windowstate = Maximized
FormBorderStyle = None
AutoSize = False
MaximizeBox = False
MinimizeBox = False
So when I maximize the parent window, Form1 maximizes and shrinks correctly... but when I double click on the gridview and the popup form comes up, several things happen:
1. Form1 (in the background) goes back to normal size (not maximized)
2. If I click on Form1 (when the Popup form is on the screen) the form disappears into the background...
What I need to happen is for Form1 to always stay maximized, no matter what happens on the screen, and when the pop up form is on the screen, I should not be able to click on any form in the background, and it should never disappear into the background itself.
I have my start up form in maximized window state, but this cause the splash screen appear behind the startup form, which cause it cannot be seen.Even i have set the time longer to display the splash screen.It still do now work. I have tried below code in the start up form but it is not working...
Private Sub Main_Shown(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Shown
Me.WindowState = FormWindowState.Maximized
End Sub
I have an MDI Form that contains an MDI Child form. On this child form is a flexgrid. When the user double clicks on a row in the flexgrid this loads another MDI Child form. I have set the following properties on the second child form:
FormBorderStyle = FixedDialog
MaximizeBox = False
MinimizeBox = False
StartPosition = CenterScreen
WindowState = Normal
The problem is that if the first MDI child form is in a maximized state and the user double clicks on the flex grid, the second child form loads in a maximized state too! How can I stop this?
I have an MDI Form that contains an MDI Child form. On this child form is a flexgrid. When the user double clicks on a row in the flexgrid this loads another MDI Child form. I have set the following properties on the second child form:
FormBorderStyle = FixedDialog
MaximizeBox = False
MinimizeBox = False
[code].....
Iam workin wid crystal reports have a problem i jus want to create a crystal report dynamically not by using crystal report wizard rather by using a blank crystal report and connecting to the database server and generating the report from the database manually....
View 1 RepliesI am using VB Express Edition 2010, and I want a button, when clicked, to make the form 'full screen' (border style done and maximised window state) and once clicked again, to return the form to maximised but with a fixed single border style. Here is my
[Code]...
i am having a Visual Studio 2008 but it not install with crystal report when i open add new item-> its didnot contain Crystal Report how can i add crystal report and make crystal reports in visual studio 2008 how i install crystal report with visual studio 2008 only crystal reports 2008 install and its open with visual studio 2008 when we click Project->Add New Item-> and crystal reports shows in thiis file
View 1 RepliesI plan on designing a Crystal Report, and then calling it through VB.NET code. Will the end-user need a Crystal license in order to use the crystal report part of the program?
View 1 RepliesI am developing a application where I have 1 parent from (windowstate of Parent from is set to Maximized) and 2 child forms. In my Parent form I have a menustrip with following code to activate child -
[Code]...
Supposed to be my form should be in maximized state when the time passed. However its not fully covered my screen its just covered slightly half on top left of my screen. What i meant is that i set my timer into 500 and decrease it by 5, while the timer running i open my WarCraft3 and its in full screen, when the time expires my form should be in maximized state "covered my screen" but it doesnt, i know it is because when Warcraft3 open it changes the resolution. SO am i able to fully covered my screen ?
View 2 RepliesWhen i pass the parameter and run the report it works fine as i close the form it closes the form is there any way so that i should be able to close the crystal report viewer and pass the parameter again and should be able to view report again.
View 1 RepliesI got a problem I want to print a report which is receipt having size 3 x 4 cm. i am unable to resize crystal report. i am using crystal report coming with visual studio.net 2008.
View 1 RepliesI have created an application using vb.net 2008 and for reports Crystal Reports Basic for Visual Studio 2008 but the problem is, when I run the application in another machine away from developing box, I get the Load report failed notice. I don't have any idea on how I should approach this issue. I tried installing the CRRedist2008_x86 and CRRedist2005_x86 but still the problem won't go away.
View 3 RepliesI'm having a problem with my crystal report with regards to report footer. I want to display the data from the table, column name "Remarks" in report footer but when I try to call the data it doesn't show the remarks. I'm using VB 6 and mdb files as my back end. Is there any command or fundamental that I've missed?
View 1 RepliesI had created 5-6 crystal report in my vb.net project with back end sql server 2005 and i had given my path for crystal report. after this i had creted setup and deployed at customer machine but there it dosn't shows any report instead of it gives an error. for viewing report so how to come up with this probelm.
View 7 Repliesim trying to fetch rows in 3 TABLES using JOined Queries.im tried the query first in MS ACCESS and it worked but when i tried to show it in Crystal report it wont show its data. [code]
View 7 RepliesI am working on a windows application in VB.Net 2008. I have added a crystal report in my project. and I have draw a Crystal Report Viewer to view the report. But when I run this report It asks user name and password. (The snapshot is attached here) I have used the following code to set the log on info of report.
[Code]...
<Visual Stusio 2005 visual basic / Crystal Report 2008>
I simply created a "Report" folder on the the project and "crTxEmpMaster.rpt" is created on the "Report" folder.I tried load a .rpt file for Crystal Report, but it occured "Load report failed" What is wrong wth it? #1 and #2 both failed.
Dim menuReport As New ReportDocument()
'#1
Dim reportPath As String = Application.StartupPath & "" & "ReportcrTxEmpMaster.rpt"
[code]....
I need advise on how to solve this scenario. I am not sure whether I should use any Report Application such as Crystal Report or I can just simply use datagridview.My scenario:In a new form, a table will show a least 3 columns.
First, ItemID
2nd, Total Quantity Sold for the Current Month
3rd, Total Quantity Sold: Last month
ItemID Current (Nov) October
ABA1 100 85
ABB1 80 90
Hence, I can compare the figure of the current month with the past few month.Right now, I do not have any problems building SQL_String for calculating the Total Qty Sold for the Current month and display it via DataGridView. But I am not sure how to additional column that calculate the Total for the past few month
I am trying to convert a VB6 Data Report (.dsr file) to a Crystal Report through the migration process within Visual Studio. I have read articles that reference adding a Data Report to a Project from Visual Studio 2005/2008 and that it will convert the Data Report to a Crystal Report, but I have not been successful in doing so. Does the VB6 Data Environment need to be converted too? Has anyone been able to do this successfully and if so, how?
View 1 RepliesI have a table there in SQL SERVER 2000 which has five fields[date income amount expense amount]. Now user wants to input first date & last date there in form to show records ok? To show record by one paraemeter was easy for me & I did it by following code. I mean I made one parameter & got one form with one text box & one button & one report viewer. Let me show you my code for button event what I used to show report by one parameter.
[Code]...
on my webbrowser i open pop ups and it opens ie and doesent open a new tab? whats the code to open it in a new tab in my web browser??
View 8 RepliesIs there a way to generate and print report in Visual Basic 2008 Express edition since there's no crystal report capability there?
View 3 RepliesI Have Read Many other questions similar to this one and i still don't understand. I Made a tabbed web browser in visual basic 2010 and i think its going pretty well. The Only problem is when i go to another website and click on a link,it opens up in another web browser window such as Internet Explorer. Sometimes even on Mozilla Firefox.
View 3 Replies
