I remember seeing somewhere on the net that there are classes in .Net that will return information about your computer. I know that System.Environment returns some of this information like MachineName and some other stuff. Are there other classes that will return information such as hard drive size, free and used space, total memory, used memory?
View 4 RepliesI have such a bad habbit of cramming all my code into one form. But i dont know when i should write a class. or dont really understand how to return the information back to form1. when should i even use a class? for example i have some code here
[Code]...
I need to provide a DLL that is consumed by a VBA app (Access 2003, late binding) and returns stuff that is retrieved from various WebServices. These WebServices publish methods that not only return a single object, but also arrays of them.
From the Access-app's point of view, it's no problem to consume i.e. an array of strings. However, there's also methods that return an array of a (proprietary) class. I can't seem to be able to consume such an array from VBA.[code]....
I have a serializable Message class that has a Data As Object property that I'm using as a generic holder for information to be sent via a system that uses a combination of push technology and/or IPC to communicate with any other programs that are interested in the information. This allows the communication piece to be agnostic of the information it transmits.
I was serializing this Data As Object as a Byte[], since I was worried about how an Object being serialized and transmitted across the network would behave on the other side. However, when deserializing I get errors about being unable to find the assembly for the types stored within my Data As Object property, because I'm deserializing in the assembly that contains the Message class... not the assembly that contains the type that Data As Object originally was.I was wondering if I'd lose the type information and be unable to cast it back to the type I want at the other end. Perhaps it's not possible to pass a type as an Object via another assembly without it knowing about my type?
I have two Parser classes that inherit from a base class, BaseParser. I want to use either class as a parameter in another Monitor class. The Parser classes, CS600 and TCH600, both have two properties, RawDataList and SummaryDataList. The CS600 class's RawDataList returns a List(of CS600Data); the TCH600 RawDataList returns a List(of TCH600Data). The SummaryDataList returns similar classes in each Parser class. CS600Data and TCH600Data derive from a base class, BaseData.BaseParser also has RawDataList (List(of BaseData)) and SummaryDataList (List(of BaseSummaryData))The Monitor class has a private field, _thisParser which can be either of the two concrete Parsers above. I want to be able to call and use RawDataList and SummaryDataList of _thisParser within Monitor class, but when I construct the concrete Parser classes, Visual Studio notes that the RawDataList property of CS600 cannot override the RawDataList property of the BaseParser because they differ in their return types.
I thought that since CS600Data derived from BaseData (but also adds some new properties of its own) that I could use CS600Data wherever I use BaseData. What am I misunderstanding? How can I correctly construct these classes?
Public MustInherit Class BaseParser
Protected _rawDataList As List(Of RawGasData.BaseData)
Public MustOverride ReadOnly Property RawDataList() As List(Of RawGasData.BaseData)
[code]....
We are developing a webservice for a client. We are not supose to throw SoapExceptions, so instead, we catch every exception server side, and return a custom Exception class.
Public Class Order
...
End Class
[Code]....
The problem now is, that since my webmethod is returning the type [Object]. The wdsl that is generated does not contain the order, or the exception.
I can change the [Object] to [Order] Or [MyException], but only one of them is generated in the wsdl.
I want both the MyException type and the Order type in my wsdl, but i just cant get it working.
I have a windows service written in .NET 2.0 that will run every 5 minutes and executes bunch oracle SQL/PLSQL scripts based on time/validation, it throws the above said error some times against some SQLs, the same SQLs run fine at later point without any error, I have no idea what is going on with the app. I am not sure if this has any thing to do with oracle connection pool as I am properly closing the connections after every SQL execution.
Exception:
System.Exception: Unexpected return code: 1 at System.Data.OracleClient.DBObjectPool.GetObject(Object owningObject, Boolean& isInTransaction) at System.Data.OracleClient.OracleConnectionPoolManager.GetPooledConnection(String encryptedConnectionString,
[CODE]............................
I have a parent class that is also a factory. For example:
Public Class Factory
Public Function clone() as Factory
' Some logic here
[code].....
I have the following Code so the User can enter their domain before the program runs. The resulting textfile does not output the users..just the word Schema...
EDIT 1: Updated to include all code. I now can run it and it returns a text file that lists
OU=_USERS
OU=_GROUPS
OU=_ETC
ETC ETC
[Code].....
This is annoying. I'm trying to put a wrapper around some functionality that uses a web service to return some information. The intention is to wrap all of that communication into a dll such that the user can simply call functions from the dll to get back information, without needing to care about the service.As far as I can tell, that isn't possible, because the service information, as far as bindings and endpoints, HAS to exist in the app.config of the program that references the dll. That means that anybody using this dll won't just be able to add a reference to it and use it, like they would with any other kind of dll, they must also edit their app.config to add in a bunch of information. That's a simple copy and paste job, but it's incredibly unfriendly, and exposes some of the internal workings of the dll to casual inspection.
View 8 RepliesCan I connect phone landline to my computer and when someone call me his information appears by his phone number this information already exist in database.. I want to know is it a service from communication company or can i do it by code just plug the cable into my computer ?
View 1 RepliesSince most of the projects I work on are exclusively SQL Server 2005/2008 database driver, I was wondering about the implications of using System.Data.SqlTypes classes as data types in my VB.Net Framework 4.0 code.For example currently I define integer variables as Dim X as Integer.Using System.Data.SqlType classes I would define my intege variables as.Dim X as System.Data.SqlTypes.SqlInt32 implications for performance, serialization and databinding. One difference would be that all variables would default to Null.
View 2 Repliesi am using data grid and i want to update it when user change i but the fallowing command in button to save update but it did not work and it give error massage
Dim builder As OleDbCommandBuilder = New OleDbCommandBuilder(DataAdapter1)
Dim CmdB As New OleDb.OleDbCommandBuilder(DataAdapter1)
DataAdapter1.Update(DataSet1, "Section")
the error messge (Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information.)
I have a table Personal.. and bind it in dataset.. i want to update the fname using datatable.. but it is not working ..throwing the error "Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information."See my source code
[Code]...
I need to generate a class at runtime similar to System.Resources where you can add a resource eg 'picture.bmp' and it immediatelly is accessible as 'System.Resources.picture.bmp'. I presume I need to generate XLM or/and XLSD at design time and then deserialise at runtime but I cant find a reference on how to do this. Specially without knowing the generic class in advance (as 'System.Resources' doesnt know all the resources in advance).
View 4 RepliesI am fresher in vb.net but I want to develop a project in this case I want to use the system.Configuration namespace's specific calsses. But I am not clear which class i use and why it's function and it's use.
View 1 RepliesI want to Ignore System Protected Folders Using My code.i already try Catch ex As UnauthorizedAccessExceptionor
View 1 Repliesi have built a DB app using vs2010Beta2 + an Access DB .mdb file for my customers the save bnt work s ok, but when i close the app i get an error message come up saying :- Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that dose not return any key column information.i have no errors repoted in the error window at the bottom and all runs well untill frm_closing,below is the code in my form closing event. below that is the code for the btnSave event
Private Sub frmMainCustomerDetails_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing
If MyState = "Edit" Or MyState = "Add" Then
[code]....
When this code segment execute
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Me.Validate()
Me.myDA.Update(Me.myDataSet.Tables("Table1"))
Me.myDataSet.AcceptChanges()
End Sub
It giving the following error. Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information. Can there is another way to update the access database by using datagrid view.
I have been developing some components for our products at work, and one of them is based off the flow layout panel.What i would like to do is provide a custom designer for it, but without loosing the features provided by it's default designer (System.Windows.Forms.Design.FlowLayoutPanelDesigner) which is marked as internal.Using Reflector i thought i would just implement it again myself, seeing as it inherits from 'FlowPanelDesigner and that from PanelDesigner` all of which are internal.
Why would these classes be specifically marked as internal? Is it due to them being specifically for Visual Studio use, and thus not 'framework' code?Also, is there an easier option that re-implementing all the functionality?
My software handles multiple operations on files, and I have now finished writing the related functions, using the System.IO classes. I now need to add support for network drives. Using a mapping works very well (although Directory.GetFiles is a bit low, and I don't know why), but I'd now like to be able to deal directly with paths such as \192.168.0.10Shared FolderMyDrive. Is there any way to handle this type of paths other than mounting the drive to an available drive letter, using the newly generated path, and then unmounting?
View 4 RepliesExists a good tutorial or example that shows how to use these classes from namespace System.Drawing.Imaging.
My idea is, to produce Bitmaps and to compress them. I don't know if for my case IO Streaming is important because I don't want to save the bitmap on my hard disk.
I would like to utilize classes that inherit the System.Data name space.Specifically, I would like to have classes CarColumn, CarTable, and CarSet derived from DataColumn, DataTable, and Dataset respectively.I would like to be able to add additional properities to each class. As an example this is how I would like to reference items within the classes:
CarSet.CarTable(0).Columns(0).foo
CarSet.CarTable(0).bar
I know that VB.Net is not capable of Multi-Inheritance.
I Have just been watching a video on throwing Exceptions. Are you supposed to throw System.Exceptions from within your custom classes. to the calling code, Which other way can they communicate. I have read in several places it is bad practice to throw SystemExeptions.
View 3 RepliesFor my applications I use the following class:
Imports System.Security.Cryptography
Imports System.IO
Imports System.Text
'SymmCrypto is a wrapper of System.Security.Cryptography.SymmetricAlgorithm
[code]....
Most of the time this works as it should, but sometimes it encodes a string and the gives an error on decoding it. The error message is: Invalid length for a Base-64 char array.
I'd like to know the way to get information about the Operating System (windows Xp or Windows 7) and the bit information(32 bit or 64 bit). [code]In the above code, if verInfo.Minor is 1 , then it should be Xp, but I am getting 1 for both Windows Xp and Windows 7.Is there any other way to determine the OS and the bit(32 or 64 bit) used?
View 3 RepliesI seem to be having a problem with controls that I am creating as new classes (not UserControls) inheriting from an existing system control. Everything seems ok while I create the control code, through to the compile (which is successful and adds the control to the toolbox) and dragging the control from the toolbox to the GUI surface. However, when I then debug or compile the project, I get a message such
[Code]...
I've been assigned to do some report analysis in a management information system.My question is, do you think it's a efficient way to gather datas from SQL, with the use of basic syntax and have them manipulated through my code in VB.NET?(I'm more skilled with this kind of execution, but it takes a lot of data calling from the database)Or should I just do the advance way of inner jointing or more likely a stored procedure?
View 2 RepliesI want to get system hardware related information such as graphics card, cpu, no. of cpu cores, etc.I was not able to find all the info in the registry. Also where in the registry can i find info related to various drivers.
View 1 RepliesI have a form for which the objective is to show a field for each timezoneinfo stored in systemtimezones. Here are four segments of code, designer and form input code windows
View 7 Replies