how do I check if a project is up-to-date?
I'm basically trying to programmatically build each project in a list but only if they have changed. So does anyone know of a way (using EnvDTE maybe) to check if a project changed and therefore needs to compile?
I have a problem with building a project. When I build a project and when I create .exe file, I cannot run it on other computers.There is an error: "The application failed to initialize properly (0x0000135). Click OK to terminate the application.".ca i have any chance to solve this error without installing framework 3.5
View 2 RepliesI have a problem with building a project. When I build a project and when I create .exe file, I cannot run it on other computers. There is an error: "The application failed to initialize properly (0x0000135). Click OK to terminate the application.". When I install .NET framework on the computer, than there is no this error. Is there any chance to create a file that will run on the other computers without installing the .NET framework?
View 8 RepliesThis EXE works fine in my PC. but if i run this EXE in another PC it gives the following Error.See the end of this message for details on invoking
************** Exception Text **************
System.Runtime.InteropServices.COMException (0x800401F3): Invalid class string (Exception from HRESULT: 0x800401F3 (CO_E_CLASSSTRING))
[code].....
I have written a program in VB.NET 2008 Express that references a .NET managed dll. I simply added a reference to the dll to the project. I then 'Imports' the dll at the beginning of the program and then can use it. Everything works fine when I am running the program in debug mode (and it uses the dll as intended), but as soon as I go to build the project I get an errors that it "Could not reslove this reference" and "Namespace of type specifier in the Imports 'ModbusTCP' doesn't contain any public member or cannot be found." The dll is located in a different location on my hard drive to the project location, but this was referenced when I 'added reference'.
View 2 RepliesI'm building a database control layer DLL for my project.HelpDB is the project.HDB is the class name.I've written a few methods for connecting to the db, querying, and the usual.I've recently included a public class HDB_ParamValue in HDB to handle query parameters.
[Code]...
Note 1: I'm moving from VB6, so you'll appreciate that I have little experience with this real OOP. If there is a link or article you can recommend that might answer this, recommend away!Note 2: I'm not concerned about databases and parameters per se, but more the _concept_ of class in a class (or class of a class).
When i am creating a setup project and building it then i am getting a setup file using which if i install then it is getting installed to single user only i want the setup to build run for every user in that system and the users can access it.
View 1 RepliesBoth projects are set to build in release modeBoth projects are in the same solutionThe solution is set to build in releaseBoth projects output to a Release folder in bin / objEverything seems to be okay except for one thing.When inspecting the files with a tool such asI tracked this down to a setting in the Advnced Compiler Options for the pdb files.If the debug info output for VB is set to anything other than none - then the project builds in debug mode (keep in mind it still outputs to the release folder).
View 1 RepliesWhen ever i publish the project, i get a bunch of deployment files and a setup file. Even after running the set up there is no .exe file.Is this just VB .Net way of opening the file now? Do i even need to use the installer? My program uses very basic math with list's and datagrid views.
View 2 RepliesWell i finally finished my Maths Quiz project made using VB. Now, all i have to do is create a wizard that installs the program on the users pc.What i did was clicked bulild--->publish build then follow the simple instructions:location--->loadfromacd/dvd--->finish although when i went to install it, it didnt create a desktop icon although it creates it in the start menu as well as so thats good but it doesnt create a shortcut to the desktop is there anyway i can make it install a desktop icon when installing?
View 3 RepliesCurrently I am building a Connectship (Shipping Service Provided by UPS) project in VB 10. This is my first project in 10, in the past I have always used 2003. We decided to upgrade due to the connect ship API(.dll) wasn't compatible with 2003.
My current problem is as follows:I've built a program that uses ADOBD, some XML httprequests and a little bit of integration with there API they have. I also built it to use .net Framework 4.0. I can run the project just fine on the machine I built it on (XP SP3), but when I go to run it on the other machine, it acts like it runs but just doesn't do nothing. Basically just starts and stops.. The machine is not the same model as mine, but has all the updates (SP3) & the .net 4.0 framework on it. I've also tried installing the software package that comes with Connectship on the machine, this is how the .dll work but it still doesn't bring anything up so I don't think it's that messing it up.I was also wondering, to run VS 10 projects you should at least have SP3 correct or could you use SP1 also in XP?
What actually is required to consider something installed on a machine. What happens in the background? I know VB offers an installer but Im trying to build my own from scratch. What do I need to do to accomplish this?
View 13 Replieshow can I create following thing with Visual basic?I would like my excel to check the date value in a cell and compare it to current date and if the value in the cell is older than 2 months compared to current date it would change the cell's colour.
View 1 RepliesI have a DB table with the following columns
PolicyNumber
NextPremiumDate
PremiumNumber
Example For each PolicyNumber i have 5 NextPremiumDates.I want to display the 1st NextPremiumDate which is easy ...but i want to show the next NextPremiumDate only after the last NextPremiumDate has passed...How do i check if the last date has passed?I mean if i have 5 dates in the table given above...how do i check if the 1st date has passed then show 2nd date ...if 2nd has passed show 3rd and so on.
I got "Unrecoverable build error" when building setup project.I try the solution in [URL].. but did not work out.
View 1 RepliesI'm trying to set form size longer, but after building the project form resizing.
View 1 RepliesI began setting up a TeamCity server a couple days ago for use in automated testing and CI. We mainly do VB.net web apps and up until now, it had been checking out things and building just fine.
A problem came up when I tried to add actual deployment into the mix. I saw this article: [URL]
referenced all over the place as a good guide, so I followed the steps relating to setting up a Web Deployment project and rigging TeamCity to run it. Basically, it recommends setting up a new build configuration in VS2010 called "Deployment" which builds the Web Deployment project, then creating a build configuration in TC that targets it.
The issue is that the web deployment project won't compile when run under TeamCity. The regular build works just fine, but if I set MSBuild to use the build configuration that includes the Web Deployment project, it crashes halfway through and gives an error about attempting to load the System.Data.OracleClient assembly in an incorrect format. I assume this means a 32-bit/64-bit error, especially since my development machine is a 32-bit box, and the build server is 64, but I don't know why this is happening, especially when the regular build works, and nothing in my project involves using an Oracle database.
I saw in the log that there's a warning about missing reference assemblies for the 4.0 framework, so I headed off to the MS website and downloaded the SDK, but that didn't change anything. At this point, I'm stuck, and I didn't see anything already here on Stack Overflow that looked quite like this. I'll attach the log below. Have I missed something simple?
[10:46:05]: Project "MyTools.sln.teamcity.patch.tcprojx" (TeamCity_Generated_Build target(s)):
[10:46:05]: [Project "MyTools.sln.teamcity.patch.tcprojx" (TeamCity_Generated_Build target(s)):] Project "MyTools.sln" (Rebuild target(s)):
[CODE]...
I have 2 SQL tables (A & B) with dates in the format DD/MM/YYYY and time, for example 01/03/2012 00:00:00. In my VB.net application I am looking to count the number of records in table A which have a date less than the one in table B. I have no problem getting the dates from the database. I have extracted the date in table B and stored this in the program. how to compare the dates within the SQL query.
In short what I am trying to do is:
"select count(records) as totalRecords from table A where date < " & dateBvariable & ""
I have a txt file with a few settings that get loaded into the Program. These are put into an array. As the array holds different types (int, string, dates etc) its set to object type.
What i am trying to fingure out is how to check the date is a valid format, by returning a false value so i can have a msgbox pupup and say the date in the file is invalid. I cant use isdate() on the string from the file as even if the date format is correct its a string not a date type so i have to convert it first (which is the point it throws an error).
I'm trying to find a VB code that checks if my date on a label is between a certain dateperiond that is chosen from two DateTimePickers..[code]...
View 6 RepliesI would like to compare dates (not times) for 2 datetime variables. I get one of the dates from database as follows and comapre it with yesterday.How can I do it?
[Code]...
In VFP9 simply I can use SET DATE BRITISH. This will use the date in dd/MM/yyyy format in whole project. Is it possible in VB.NET? I tried the ideas like
Mydatagrid1.Columns(3).CellTemplate.Style.Format = "dd/MM/yyyy"or Mydatagrid1.Columns(3).DefaultCellStyle.Format = "dd/MM/yyyy"
PS: The above will be useful for the previously displayed contents in datagriview. But If we want to enter from new-rows of datagridview, the date is getting input like the format MM/dd/yyyy.
I am working on an application which uploads data from excel sheets into sql server database. The application will accept dates only if they are in mm/dd/yyyy format. It should reject all dates otherwise.
Now i am struggling to check its format. Here is my code.
Dim ROHSDate As String
ROHSDate = Trim(filterString(holdingTank))
...
here i need to check if it is in mm/dd/yyyy format
Is there any way to check date and hour without using two Timers?
Right now i have this for the date:
Private Sub Timer1_Tick(ByVal sender As Object, ByVal e As System.EventArgs) Handles Timer1.Tick
Timer1.Stop()
[Code]....
PS (again): I thought about setting the Timer1 interval to 60000miliseconds, so that it would check the time everysingle step of the way (or maybe 10 minutes...), but I don't want the app to lag, so... How can i implement a Background Worker?
I need to check my field in format ddMMyyyy(ex 12/03/1990) whether in interval of two dates that user picks from two date picker controls. Two date pickers are in custom format dd/MM. It does not matter for me if its between particular years. I need just to know if given Birthday belongs to interval taken from screen. Each datepicker gives values dd/mm/yyyy. I do not know how to check it. For example: Given date 12/03/1990 . User select two values from screen: From 01/01/1950 Upto 30/04/1949(or 1990, or 2000) Result should be True.Because 12 march is between 01 Januar and 30 April.
View 1 RepliesI need to check my field in format ddMMyyyy(ex 12/03/1990) whether in interval of two dates that user picks from two date picker controls. Two date pickers are in custom format dd/MM. It does not matter for me if its between particular years. I need just to know if given Birthday belongs to interval taken from screen. Each datepicker gives
values dd/mm/yyyy. I do not know how to check it. For example:Given date 12/03/1990 . User select two values from screen: From 01/01/1950 Upto 30/04/1949(or 1990, or 2000) Result should be True.Because 12 march is between 01 Januar and 30 April.
I am working on a business related program, so I need to know if system date is correct -synced- with remote server. How do you do that in vb .NET winforms?
P.S: In addition, is there any way to raise some event when system clock changed to prevent hacks? I don't want users to change local date after logging in their account.
I am working for application register form and I would like to know when the user opens the register form I need to check if the current date is true or not and when the user tries to change the system date he should pop up message.So I would like to refresh the form for every second and find whether he has changed the date or not. How do I do that?
Here is my code:
btnRegister.Enabled = False
Dim oReg As Microsoft.Win32.RegistryKey
oReg = Microsoft.Win32.Registry.CurrentUser.OpenSubKey("Software", True)
[Code]....
My application require to have Synchronized time for all userI have several PC connected to same Database in a LAN, but each PC Clock is set differently, maybe few minute before or after. I need to capture the time from the PC where the Database is located
View 9 RepliesI have a script that needs to only carry out and action if the day is not a weekend. [code]...
View 3 Replies
