.net - Check If A Radiobutton Is Checked In A Group?
Aug 11, 2010
I have group of radio buttons, each group ranges from 5 - 27 radiobuttons. And if any radio button in a group is checked I store 1 in db else I store 0. Now I'm checking each radiobutton using if loop to see if they are checked and set database value. I'm also trying to use the code below. Is there a good/better approach to check if they are checked or not?
Current code:
'rname is radiobutton prefix for a given group
'cnt is number of radiobuttons in the group
Private Function RadioIsChecked(ByVal rname As String, ByVal cnt As Integer) As Integer[code]....
Note: I cannot use radio button list. I know this can be achieved easily using this but i want to get solution for radiobutton
View 5 Replies
ADVERTISEMENT
Nov 15, 2011
I have problem, that I have a lot of code, and I want to try to make less as much code. I have 30 RadioButtons and is even possible tu use something like that
If CheckedRadioButton.Checked = True Then
When user click on any of RadioButtons, then it can write number of RadioButton in settings.
View 6 Replies
Dec 15, 2010
I have two radiobuttons and i want to save the result of the one that has been chosen into the databasehow do i go about this.as for now i have been using an if statement as shown below but i know that there is a more educated way to go about it.
If rdbCustomSW.Checked = True Then
txtType.Text = "Custom"
End If
[code].....
View 1 Replies
Sep 4, 2009
Im basicly making a "Settings" form and I want it to be able to check more then one radio button, but only 1 per "line" (One Per Setting)
View 4 Replies
Jan 5, 2012
How should I go about looping through a groupboxes controls and if a radiobutton is checked then do something, else display a message?
View 6 Replies
Nov 29, 2011
When I run the apps, one radiobutton is checked though the checked properties is set to false. No code setting it to true either I tried deleting and creating a new one but it is still setting checked to true at
View 18 Replies
Jul 30, 2010
I have say 4 asp.net radiobuttons which are grouped, I want to find out which one is checked.
What seems natural to do is:
Select Case RadioButton.Checked = True
Case myRadioButton1
Case myRadioButton2
Case myRadioButton3
Case Else
End Select
I just get a 'reference to a non-shared member reference' error. It's a shame because it seems such a clean way to do this test.. Is it possible??
View 3 Replies
Feb 1, 2011
rather than having all the if statements can you have one line that says Label1.text = "You selected " & RadioGroup1.Text
Sub SubmitBtn_Click(Sender As Object, e As EventArgs)
If Radio1.Checked Then
Label1.Text = "You selected " & Radio1.Text
ElseIf Radio2.Checked Then
[code]....
View 3 Replies
Feb 25, 2011
I have a form that has 13 groupboxes each with 6 radio buttons in them. I want to be able to tab through the left-most radio button in order. At load time, the left-most radiobutton in the top groupbox is checked. The only way I found to have this load unchecked is by setting it using a timer, but this makes it so that that radiobutton can't be tabbed to at all.
View 6 Replies
May 11, 2009
How can I set a verification that something is checked in a set of radio buttons within a group box? So... groupbox1 has rad1, rad2, rad3. I want to verify that at least one of them is checked. I was going to do a select case, but I can't figure the syntax for the cases... Visual Studio 2008, btw
View 12 Replies
Oct 9, 2010
When filling controls on a form, I want to check the DB value of a Field, if it Yes one RB is set to checked, if it is No the other one is set. I know I have doen this before but can't remeber how or find a sample.
vb.net
If Not dsSearch.Tables(0).Rows(dbCursor).Item(12) Is DBNull.Value Then
If dsSearch.Tables(0).Rows(dbCursor).Item(12) Is "Yes" Then
Me.rbtActive.Checked = CBool(CheckState.Checked)
[code]....
View 4 Replies
Jun 1, 2012
I have a very simple class that holds a few public properties - ID, Text, Colour, etc. and a Boolean called 'SelectedItem'. Just like the Checked property on RadioButtons, only one item can have its SelectedItem property set to True within a particular group. Note: there will be several separate groups (lists), each allowed to have only one item with SelectedItem = True.
My first thought was that I would probably just have to handle everything outside of the class, setting SelectedItem to False for every other item in a particular list when another item was selected. But that seems rather inelegant to me. So I've been trying to think of how this might be done within the class. For example: could I perhaps have a private string property called say "GroupName" - set in the New sub when adding a new instance of the class - and then use a private shared method to set every item's SelectedItem property to False, provided the item has the same GroupName as the newly selected item? I would have a go at doing this but I have no idea how to enumerate every instance of a class from within that class, or whether that's even possible. Is it? Or is there another (better) way to achieve my goal? Here is a cut-down version of what I've got so far:
Public Class ResourceItem
Public ID As Integer
Public Text As String[code]....
As can be seen: instead of instantiating a new ResourceItem and passing that as an argument to the manager's Add procedure, I'm simply passing the details of the new item and the procedure is creating the item from those. I don't know whether this is a good or bad idea - please advise - but I've done it because I couldn't figure out how to make the SelectedItem property only writeable by the manager, so I wanted to avoid having directly accessible objects that could have their SelectedItem property set to True without it deselecting all the other items in the same group. Of course that still leaves the possibility of setting a variable to one of the manager's list items and setting it from there, so I would still like to know how I could prevent that, if possible.
UPDATE: I didn't use the code above in the end, deciding instead to go with Cyborgx37's solution - which seems to work perfectly well for me despite the warnings about best practice. I also realised I would need to use the same class in another scenario where multiple items could be selected, so it was easy to add a Boolean property to the manager to enable that.
View 2 Replies
May 12, 2010
Is there a way to validate a groupbox with a couple radiobuttons in it to make sure that one of the radiobuttons is selected?
Heres why I need this. I need a user to be able to select their class rank out by way of radiobuttons in a groupbox. When they click submit, I need to validate that atleast one of the radiobuttons got selected and if not display a messagebox.
I got one reply early of:
If myGroupBox.Controls.OfType(Of RadioButton).Count(Function(rb) rb.Checked) = 0 Then
'There is no RadioButton checked in myGroupBox.
End If
Is there any other ways other then that? Preferrably a more 'dumbed' down way? This is for just an entry level VB class, I would prefer not to use something of that nature if there is another way.
View 7 Replies
Oct 4, 2009
How do I check a CheckBox/RadioButton in a webbrowser?
View 2 Replies
Aug 21, 2009
Why is this code having the opposite effect? If It's checked in the checkedlistbox it's not check in my view, if it's not check in my checkedlistbox it is checked in the grid.
EDIT: More specifically. The CheckState.Checked is always the opposite. .Checked means it's not checked.
Private Sub CheckedListBox1_ItemCheck(ByVal sender As Object, ByVal e As System.Windows.Forms.ItemCheckEventArgs) Handles CheckedListBox1.ItemCheck
Try
[Code]....
View 2 Replies
Sep 3, 2010
I have 3 RadioButton on the form, and a button. in button click event i have the following line RadioButton1.Checked = False when the rb1 checked is set the false, none of the other two rb's are set to true.Which should happen by default (atleast i happens when i set the checked using mouse or keybd)
View 6 Replies
Oct 3, 2010
I have a datagridview with a checkbox column.i want to check whether checkbox is checked or not.If the checkbox is selected it should output as "True" in messagebox and if checkbox is not selected it should giving me a message "False".
View 3 Replies
Feb 9, 2005
Bind a CheckBoxList Control to a database where it will select 13 things out..I want the easiest way to check which checkboxes are checked and which aren't and add to my database of features the boolean options 1/0 if they are checked or not.
View 2 Replies
Jul 25, 2009
how can check if a user is in a ad group?
View 3 Replies
Aug 3, 2011
I have a Four radio button on the form. I want to make them in two groups.Now when i checked anyone the remaining three are unchecked. I want to make two radio buttons in one group and in another group two.Suppose in one group when i check one the other two in second group not unchecked. How i do it?
View 1 Replies
May 19, 2009
I have a chechlistbox and i have 10 items. and items are checks randomly.
i want to determine which items in checklistbox is check.
View 4 Replies
May 11, 2009
I'm having a hard time figuring out why this is happening. When I check an item in the listbox it calls the sub ItemCheck for the listbox accordingly:
Code:
Private Sub chklbToDo_ItemCheck(ByVal sender As Object, ByVal e As System.Windows.Forms.ItemCheckEventArgs) Handles chklbToDo.ItemCheck
Dim iLoop As Integer
Dim iCheck As Boolean
[code]....
I've had to work with the delay of the check by reversing the boolean value caused by the check. But when I worked it into the program to delete the item that is checked, it deletes the selected/(un)checked item and THEN checks the item with the index. So in other words, if a user selects and checks an item in the listbox, and chooses to delete the item, it deletes the item and then checks the item that replaces it in the index (the following item).I don't understand why the checked value doesn't appear until after the sub ends.
View 3 Replies
Jun 10, 2010
on my form I would like it to remember the checked checkboxes when it closes.
View 2 Replies
Feb 24, 2011
I have about four columns inside my listview.I also have checkboxs that are located to the left of the listview. A checkbox is added to first column but how would I check if the checkbox is checked?
View 2 Replies
Jan 16, 2011
I'm trying to see what checkbox is selected is checked
With this code.
[code]...
Unable to cast object of type 'System.String' to type 'System.Windows.Forms.CheckBox'.
View 5 Replies
Oct 31, 2010
How can I check if there is at least one checkbox checked?
View 16 Replies
May 6, 2011
I have a groupbox with two radio buttons on it, is there a way to check if any of the radio button is checked without having to go to individual radio control but from the Groupbox control.
View 5 Replies
May 9, 2012
I have a groupbox with 12 checkboxes(containing months of the year). I need to calculate and display the value in a text box.
For example if one check box is checked then on clicking the button calculate, it should be able to display the value 500 in the text box, if two checkboxes is checked then the total should be 1000, if three check boxes then total should be 1500 and so on[code]...
View 1 Replies
Apr 26, 2009
The other day I needed to know how to handle a group of form items in one function, specifically speaking I needed to uncheck all ListBoxes in a group of a MenuStrip when any other was checked. Now I need something similar, except this time it's just a group of check boxes on a panel. heres the code I used for the other purpose.
[Code]...
View 1 Replies
Jul 14, 2010
I want to make a check box change color when it is checked. In looking for answers it appears there used to be a fill color option in the properties, now in there is just back color and fore color. I am using VB 2008 Express.
View 2 Replies
