.net - Stream Connection Using Httpwebrequest?
Apr 3, 2012
I have created a httpwebrequest connection to a streaming API after trying a tTCPClient which just never ended up working. My concern is whether my code is correct and that I am actually reading in new data and that the connection is maintained. Initially I had been reading into a buffer and just loaded everything into a file after max size, but figured it would be simpler to read a line, since each entry was being sent delimited by line feeds.
rStream = webrequest.GetResponse().GetResponseStream
rStream = New GZipStream(rStream, CompressionMode.Decompress)
If rStream.CanRead then
[code]....
It looks like I am continuously reading and not sure if I am reading redundant data here. Also another question is that if I were to use a thread to appendToFile, would that maintain the connection to the stream?
View 1 Replies
ADVERTISEMENT
Sep 29, 2010
Dim request As HttpWebRequest = DirectCast(HttpWebRequest.Create(url), HttpWebRequest)
Using stream As System.IO.Stream = request.GetResponse().GetResponseStream()
View 2 Replies
May 17, 2012
I am connecting to a data stream that pushes data continuously and when I tried to set up a network stream I just could not connect and kept getting the 'not found' error. I used the httpwebrequest with webrequest.keepalive = true and started to consume the data by reading into a buffer and then appending to a stringbuilder. Once the stringbuilder reaches max size I flush it to a text file. The problem is that I get disconnected from the data stream because I am not reading the data fast enough. I need to keep the connection open and read the data while ensuring data gets stored in text files. If I use method "CONNECT" it does not connect to the stream.
While (True)
webrequest = DirectCast(Net.WebRequest.Create(url), HttpWebRequest)
webrequest.Credentials = New System.Net.NetworkCredential(username, password)
webrequest.Method = "GET"
[code]....
should I increase the buffer size and if so what is the max? that would mean I can read more data at a time and keep up with incoming push. Disparate here.
ACtually also I noticed that it gets stuck on this line
numbytesread = responseStream.Read(bufferread, 0, BUFFER_SIZE)
and then eventually I get disconnected.
View 1 Replies
May 17, 2012
I am connecting to a data stream that pushes data continuously and when I tried to set up a network stream I just could not connect and kept getting the 'not found' error. I used the httpwebrequest with webrequest.keepalive = true and started to consume the data by reading into a buffer and then appending to a stringbuilder. Once the stringbuilder reaches max size I flush it to a text file. The problem is that I get disconnected from the data stream because I am not reading the data fast enough. I need to keep the connection open and read the data while ensuring data gets stored in text files.If I use method "CONNECT" it does not connect to the stream.[code]
View 1 Replies
Apr 26, 2010
I have a script returns a string:
[URL]
PHP script:
$data = $_GET['q'];
$query = "SELECT * FROM `table` WHERE ID = '$data'";
$result = mysql_query($query);
[Code].....
View 2 Replies
Aug 5, 2011
I m using proxy in httpwebrequest
[Code]...
But i m unable to check any outgoing connection from my application in fiddler how i can check what request my application sent to server if i m using proxy
View 4 Replies
Oct 26, 2010
My app currently sends GET httpwebrequests and parses the content after reading the response stream for each request and the repeats this process over and over. I need to implement a continuous http stream which uses the same GET request but the connection stays open, from what I understand. how would I change my existing code to do this?
The streaming HTTP implementation allows one to cosume data in real time over a single persistent HTTp request. It access a data feed that continues to send activities on that response. I need to read data from the response, process it(parse and store) and then continue reading from the response and continue this process until the connection is closed. Would this be like a asynchronous request instead?
CODE:
View 1 Replies
Dec 28, 2011
What I would like to know is how to obtain form input elements during an httpwebrequest?
[Code]...
Is it possible to obtain these input elements during an httpwebrequest without having to view the html code?
View 1 Replies
May 25, 2012
in an winForm app in VS2010 win 7 compiling to x86, I try to do what Alvas.Audio seems to work. See (c# ex: [URL] for reference.
Dim data() As Byte = wr.ReadData(second * i, second)
The result give me data.length()=0. I do not have any exception, I can read format from it and whatever reader I use I got this problem.EDIT : After some tests, it seems like the uncompressed file I create in the first step (in PCM format, with .wav extension) can not be recognized by the Alvas.audio library for the second step. I must miss something around Audio file markups or something alike.
Here is the code that might be the source (basically this is step 1):
Dim functOut As String = String.Empty
Dim wr As Alvas.Audio.IAudioReader = Nothing
Dim fs As IO.FileStream = Nothing
[code]....
How can I write the resulted stream to be sure I can read it again later?
View 1 Replies
May 5, 2011
Im making a desktop player for a online web radio, and for the program I wanna make it show all the stream info. Like the stream name, and such. However I dont know how to do this? I looked everywhere
The server url is setup like this "[URL]" And it has all the stream info and that there. So is there a way I can get the info from there onto like say a label? Live updates btw.
View 1 Replies
Nov 22, 2011
I have a problem with the cryptostream, if i write the stream to a memorystream the memory that the stream used is still alocated and i have no way of unalocating it.what am i missingdoing wrong? im using-using on the streams,readers and crypto stuffs so the framework should shut them all down right? i tryed calling .close and .dispose but nothing ,in fact i moved it all over I have provided the sub that im using for the encrytion im in .net 4.5 so there is a lil async stuff but i know thats not the problem coz i moved this code out of my main app(.net 4) for testing to see if i could fix the problem.[code...]
View 12 Replies
Aug 25, 2009
How do I assign a My.Settings.Item connection string to cmd.Connection connection string value?
Dim cmd As New SqlCommand()
cmd.Connection = My.Settings.Item("csStaffHoursWorked")
cmd.CommandType = CommandType.StoredProcedure
cmd.CommandText = "spSaveDeltekImport"
View 3 Replies
Feb 5, 2010
Is there a way to display the connection properties dialog for connection string browsing(for database) in run time?
As I want the user to be able to connect to various database using the GUI.
View 6 Replies
Aug 3, 2011
i have an application. which is executed after every 5 mins. i have an open connection but it gives me the following error:
ExecuteScalar requires an open and available Connection. The connection's current state is closed.
my code is something like this. I have shown where all i am using ExceuteScalar()
Sub Main()
Try
connection.open()
cmd.ExecuteScalar()
[code]....
View 2 Replies
Aug 19, 2010
After running the following sub (VS debugger), I try to detach the database in SSMS, but it shows the connection open still and won't let me detach. If I close program in debugger, the database shows no connections. I check the dataadapter's connection in the finally block and is shows closed. What gives
Private Function ClientMasterDBFiles(ByVal MasterClientDBConnection As String, ByVal DBName As String) As DataTable
[Code]...
View 1 Replies
Mar 15, 2009
I have a simple scraper. It works on some websites, but on some there is this Error:
Quote:
IOException was unhandled Unable to read data from the transport connection: The connection was closed
It is occuring at "Dim htmlresults As String = Urlcontents.ReadToEnd()".
'Create the HttpWebRequest object
Dim req As HttpWebRequest = WebRequest.Create(URL)
'Set the timeout to 1 second (or 1,000 milliseconds)
req.Timeout = 10000
[code]....
View 2 Replies
Jun 21, 2010
I am attempting to write a program that will disable the Local Area Connection while leaving the Wireless connection enabled. My company is using net-books in our stores to demo air-cards and we need to keep them off of the LAN. I'm new to VB and VB.net, and it's been a while since I did any type of programming. I've gathered some code that others have posted in forums and tutorials and I'm working through a tutorial book, but I finally believe that I am stuck.
[Code]...
View 4 Replies
Nov 30, 2008
i make a class and when i call on form then that error occurs "ExecuteNonQuery requires an open and available connection, the connection Current stat is close "
Class Code isImports System.Data.SqlClientImports System.DataImports System.StringPublic Class DatabaseKits Dim Cn As New SqlClient.SqlConnection Public Function BuildConnection() As Boolean Try Cn.ConnectionString = "Persist Security Info=False;Integrated Security=True;Trusted_Connection=Yes;database=BizAimsPro2008;server=Server-2k3s" BuildConnection =
[code]....
View 3 Replies
Sep 3, 2011
I understand the possibilities for encrypting a connection string in .net v4. I have a win forms application that will be used by multiple people on different machines. I understand that I need to protect the connection string at time of the app being first run on the target machine. However I am concerned that for a period of time my connection string will be unencrypted. I am looking for advice in how to deploy my app with the connection string already encrypted or encrypted during installation. encrypting the connection string in a secure way?
View 1 Replies
Mar 21, 2010
I have no idea how to use httpwebrequest anyone can show me an example of code to do the following
1.Navigate to website with cookies
2.use this cookies and website referrer to download file with direct url (url...)
View 3 Replies
Dec 19, 2011
Try If functionmode = "ADD" Then
[Code]...
View 1 Replies
Jul 5, 2011
I got this error..The connection was not closed. The connection's current state is open.
This is coding to add data in Ms access in vb...
Imports System.Data.OleDb Public Class Form1
[Code]...
View 5 Replies
May 20, 2010
I'm developing a device app in VB.net that will access a SQL Server database. I need to establish a connection when the app is launched, and keep the connection open until the app is closed. I've done the following:In the Master Module:
Public CNN
As SqlConnection
In the Main menu form load:
CNN =
New SqlConnection(sqlConnString)
CNN.Open()
Then when I want to read from the database:
Dim sqlDR
As SqlDataReader
SQL = "SELECT Name FROM Table"
[code]....
When I run the same code without the global CNN, but rather dim the connection inside the Select function, all works well.
View 6 Replies
Jan 19, 2011
I'm developing an app in vb.net (visual studio 2008). I have a Teradata back-end that will be supporting multiple users in a production environment. I need to use variables in the connection string as the user/pass will be changed every 3 months.
For the gist of the application:
In it's most basic form - I have a search form which works correctly - it pulls results into a listbox and the user then double clicks the list box which will then open a form that is bound via table adapter to the back-end table (Teradata). My connection string is fine everywhere in the application. My problem is using a modified connection string for the "fill" function of the table adapter once the form is opened.
I'm using the code below for the on-load event and keep getting an "invalid connection string" - again, the connection string works fine everywhere else in the app, and the variables etc... are working correctly.
Private Sub adaptertest_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim DBConnStr As String = "Provider=TDOLEDB;Data Source=TDDEV;Persist Security
[Code].....
View 5 Replies
Aug 26, 2009
I'm facing a problem after installation any software setup that has a database in access(mdb file) How to I transfer file path in our connection string.
View 3 Replies
Mar 11, 2010
I'm trying to insert a new records into database, one of those records is a "datetime"...when I type a wrong date, and try to insert those values into database, i get an error (about wrong typed date etc.)...ok, that's fine, things need to work that way. But here comes the problem, I correct the date, and then try to insert values again...here I get an error from the post title. And this doesn't work until I close that form and run it again...here's part of my code:
Dim cvLicence As New SQL
Try
cvLicence.upis("INSERT INTO blabla (itsnotimportant) VALUES ('something')")
MsgBox("everything's fine", MsgBoxStyle.Information)
[code]....
View 7 Replies
Jun 12, 2011
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
exitwithout()
[code].....
View 1 Replies
Sep 7, 2011
When it comes to database connections what is the difference between closing a connection & disposing a connection? I'm hoping to gain a more technical understanding of what happens when each is called & the effect on the database.
View 5 Replies
Jan 4, 2011
I am facing a strange problem with listbox. I need to scrab whois information. I used the following code to get source code of the whois query. It works fine if I use a textbox. But I need to use this for multiple url and therefore need to use lixtbox to loop through url list. Unfortunately when I use listbox1.selecteditem or listbox1.text it does not work. But this same code works with webbrowser.
Dim request As System.Net.HttpWebRequest = System.Net.HttpWebRequest.Create("http://www.networksolutions.com/whois/results.jsp?domain=" & listbox1.selecteditem)
request.UserAgent = "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.0.3705)"
[code]....
View 1 Replies
Jul 4, 2011
I'm building this class to download files in parts/sections/segments. In .NET 4.0, I can use this code to specify the range to download from
long startPos = int.MaxValue+1;
HttpWebRequest.AddRange(startPos);
and it works because there is a long overload for the AddRange method. When I looked up the .NET 3.5 version, I realised the AddRange() method allows using int only. The possible workaround would be using the AddRange(string, int) or AddRange(string, int, int) methods. Since the class will have to work in .NET 3.5, I'll have to go with the string specification but unfortunately I can't seem to find any sample code that shows how to specify ranges using this procedure in .NET 3.5. Can anyone show be how to do this?As the first code sample I wrote shows, I would like to specify a range of type long instead of int. Using type int allows requesting for byte ranges only up to 2GB but long allows requesting for byte ranges beyong 2GB.
The question therefore is: How do I specify byte ranges of 2GB or higher on HttpWebRequest in .NET 3.5?
View 3 Replies
