Read A SQL Server Database And Produce A Mailing List?
Jan 4, 2012
I'm trying to create a VBasic executable to read a SQL server database and produce a mailing list.I have the SQL routine working fine and had set it up as a stored procedure, but I've just discovered the manager I've written this for is an Access-type and does not have SQL Server installed on her machine. So, I figured I'd make a front end in VBasic.
Dim con As New SqlClient.SqlConnection
con.ConnectionString = "Data Source=mySQLServer;User ID=Username;Password=myPass;"
con.Open()
View 3 Replies
ADVERTISEMENT
May 4, 2009
I have an SQL database set up on my web server. Is it possible to read from a table in that database and display a value in a textbox, for example? I want to store valid values in a server database and then check the entered values in the application against the server values.
View 2 Replies
Jun 19, 2011
I'm trying to make the following snippet work in VB6 but it's one error after the other. can anyone make heads or tails of this?
Basically i'm after a little proggy which will store the names of a couple of products, calculate product code (first three and last three characters of product name) produce a list of products stcked with their initial stock levels, allow info on products be search for, allow the products to be purchased.
[code]...
View 1 Replies
Jun 18, 2011
I want to read pdf file in the database sql server
but i want to read from my application or open adobe reader
View 2 Replies
Jul 27, 2010
I hate to ask this question on this forum, but I'm having a lot of trouble finding it on these online tutorials. Basically, I'm learning about SQL, VB.NET, and how to glue the two together, and I've learned about using SqlCommand.executeScalar() to get the first entry in a table. But that's all it's really good for, right? Or is there something more to the story here?
Basically, I'm wanting to ask about how to pull in a FULL table from a SQL database while using VB.NET, as well as how to pry substrings and stuff from it. Again I'm having to ask this on this forum because all these online tutorials seem to ignore the subject completely.
View 2 Replies
May 28, 2009
I have created an program that can produce an XML file from the SQL database.and the code is looks like below:
[Code]....
why is there a <NewDataSet></NewDataSet> node?2. How to remove that node?
View 4 Replies
Aug 31, 2010
I was just wondering if it's possible to create an app that interacts with a database hosted on a web server... or is it only possible using VB.NET? Also if it is possible, is there any good documentation or tutorials I could reference?
View 2 Replies
Dec 2, 2011
I know how to select items from an array with LINQ, but what I can't figure out how to do is access a database using an IQueryable. I connected the database to my project, added two classes from the database to the "LINQ to SQL" .dbml file and saved it. In my programming assignment, I am not supposed to create a data source (table thing) to display the data, but update my own interface manually. In order to do it, I was told to instantiate this:
Private dogs As System.Linq.IQueryable(Of Dog)
(Dog is a class that I added to my .dbml file from the database file)Also, I am told it involves using a method
.AsEnumerable.ElementAt(index As Integer)
View 1 Replies
Jul 17, 2011
Trying to use asp.net for the first time. I want to read a single value from a sql server database.
I have configured the SqldataSource as:
CODE:
I have the above asp:SqlDataSource code on the website page. The connection string is in the web.config file. When I run the page it is all works but the required data is not shown. Am I right to think that where I dragged the sqldatasource entity is where the data result should be shown?
View 1 Replies
Aug 5, 2010
I have one application create tables in database dynamically during run. Another application need to find all these tables' name in the database. how should in do in vb.net
View 7 Replies
Aug 10, 2011
I am trying to create a console application that does the following:
1) read a text file
2) Save the content over to a SQL Server database
3) Use command line arguments to allow user to specify any delimited file
View 6 Replies
May 27, 2009
how to fill List View and Data Grid from a Database (SQL Server).
View 4 Replies
Apr 17, 2009
I have produced an application which works with datasets but I now wish to provide the user the ability to add and admend records within the database.But i wish to do this in a seperate form.My current dataset instanciates classes onLoad.Should i try passing the Dataset to the new form class? although I have the problem where by when i pass the dataset to the form class using code below i get this problem:[code]Should i just create a create a new connection to the database and produce a new dataset for this form? or is there a better way to do this?
View 2 Replies
Jun 4, 2008
I need to read the email from the mail server that is in my intranet from my application server.
View 9 Replies
Sep 9, 2009
I have three related tables, Residence, HomeOwners & Invoices. Residences can have multiple unpaid invoices. I am trying to create a mailing lable report so if a residence has 4 unpaid invoices, I only need the residence once. The below sql statement is returing 32 rows (the number of unpaid invoices) instead of the jus the 9 residences who owe the 32 invoices.
[Code]...
View 2 Replies
Apr 7, 2010
I decided to have a go with Visual Studio 2010 using the VB language. Basically, aI have a windows form which shows a datagridview. The datagridview is filtered when the user selects a combo box. I then want the user to be able to e-mail the datagrid to a e-mail address. I've had a good look around the internet and found a way of sending the datagrid by HTML format. This has a few problems though - it doesn't look quite right (the columns aren't broken up by any lines) and the information isn't filtered (it sends everything that is stored it the datagrid).
Here is my code so far.
Dim oApp As Outlook._Application
oApp = New Outlook.Application
Dim oMsg As Outlook.MailItem
oMsg = oApp.CreateItem(Outlook.OlItemType.olMailItem)
[Code] .....
Here is what the form looks like when filtered.
Here is what the e-mail looks like.
So my question is, how do I get a filtered datagrid e-mailed?
View 4 Replies
Feb 9, 2010
I am maintaining a program that automatically does a mail merge based on a client list. Using earlier versions of Microsoft Word, such as 2003, I did not have any trouble simply using the MailingLabel.CreateNewDocument() function, which takes a MAILING LABEL ID as its first parameter.The particular ID I'm now having trouble with in Word 2007 is "5160" which is an Avery label that should print three labels across the page (and it did in Word 2003). In Word 2007, it now prints 4 labels across.
From the research I've already done, apparently this is because the number of label templates has greatly expanded since the release of Word 2003, and now Word 2007 has a new set of label IDs that can be used with the MailingLabel.CreateNewDocumentByID() function. In the case of the Avery 5160 label, its new ID to be used for Word 2007 with the MailingLabel.CreateNewDocumentByID() function is "1359804671" and I have NO IDEA how that was calculated or where it was found.
I can't find the list of IDs to be used with the MailingLabel.CreateNewDocumentByID() function for Word 2007 anywhere. I read in a Microsoft Developer's blog post that you can calculate the new ID by using the following formula:
Label ID = (vendor id << 24) | product id
Unfortunately, that doesn't make any mathematical sense to me as I don't know what "<<" and "|" are supposed to represent in mathematical terms. Can anyone tell me where to find or how to calculate (based on the vendor id and product id) the mailing label ID I need to use with the MailingLabel.CreateNewDocumentByID() function?
View 3 Replies
Aug 9, 2011
I have written little console application that sends emails. It behaves in the following manner:when I run this application in debug mode and go through code step by step it sends emails;when I run this application in debug mode and do not go through code step by step, last email does not get sent;when I build and move application to server and create a task for it, last email does not get sent;when I execute application from Windows explorer (double click on .exe file), last email does not get sent;when I execute application from command prompt it sends all emails;What is interesting is that when I putthread.sleep(200) all emails are sent! Note that I am using this code in my ASP applications and all mails are sent always. If mail has attachment, it is always sent, even if it is last in queue (but this is another application that works correctly).
Code that I use (class for mailing):
Public Class Mailer
' Methods
[code].....
View 3 Replies
Apr 4, 2011
I am creating auto mailer but i am having problem on BCC. BCC is listed on checkedlistbox. Image ([URL]) I would like to send on those email address every 5 seconds. but my problem is i'm always getting an error message "a recipient must be specified" Here's my code...
[Code]...
View 1 Replies
Nov 18, 2011
I want to be able to send emails to users on creation of an event to invite them. However I want the emails to be personalized i.e. each email will contain there name etc. At most the emails will be sent to 50 different addresses. What is the best way to go about this?
View 2 Replies
Apr 20, 2010
My DevExpress CSV export has two lines per record.
Rank Score,Prog.,Full Address
63.30 ,JIW ,1234 Whispering Pines Dr
, ,Sometown MI 48316
62.80 ,JIW ,9876 Beagle Dr
, ,Sometown Twp MI 48382
I would like to change it to one line because I want to do a Word Merge. (Unless Word can merge these two lines back together, which I do not thing it can do)
[Code]...
View 1 Replies
Aug 12, 2009
Do anybody have sample code for mailing using System.net.Mail
View 1 Replies
Oct 27, 2009
In VS 2008, VB.Net, I am successful connecting to a local SQL Server (version 8) and seeing all tables/views/procedures in Server Explorer. The local OS is Win XP Pro SP3. I created an ODBC data source to a remote SQL server (also version 8) with a database of the same structure as the local one. The connection tests out ok. The remote computer runs Windows Server 2000 SP4. In the VS 2008 Server Explorer I add this ODBC source. When I click on the plus-signs to expand items, neither the tables nor the views show anything, whereas the full list of procedures appears. Is it the old SQL Server version? Is it the old Server OS version? Something else alltogether?
View 2 Replies
Oct 27, 2009
In VS 2008, VB.Net, I am successful connecting to a local SQL Server and seeing all tables/views/procedures.I created an ODBC data source to a remote SQL server with a database of the same structure as the local one.The connection tests out ok. In the VS 2008 Server Explorer I add this source. When I click on the plus-signs to expand items, neither the tables nor the views show anything, whereas the full list of procedures appears.How can I see the lists of tables and views in Server Explorer for an ODBC source?
View 1 Replies
Jan 27, 2011
I have a small problem i'm trying to fetch list of directoies from 1 special ftp server wich does not support LIST command i was try this code and it works for all ftp server i have try exept this special one :
'' Get the object used to communicate with the server.
'Dim request As FtpWebRequest = DirectCast(WebRequest.Create("ftp://" & txtFTPhost.Text), FtpWebRequest)
[code]...
I'm getting error 502 which means command is not supported and app crashed. I would just simple said leave it but i have try normal ftp clients like FlashFXp and it works just fine (i can see error in the log but it just pass it and show direcoties)
View 4 Replies
Jan 21, 2011
I have created my site using ASP.NET Personal Starter Kits 3.5. I use Visual Studio 2008 only . .with its built-in SQL Server (2005 Express) ... my database in App_Data is ASPNETDB.MDF ...I have created some of my tables also ....in ASPNETDB ..In my local PC the site was running fine ...But when I publish my site on production server it doesn't work and shows the following error
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
[code].....
View 2 Replies
Nov 2, 2011
I have developed a VB.NET program using a strongly typed dataset. This dataset has its connection to a SQL Server 2008 R2. The software should now be additionally used offline. The database should be exported to a *.sdf database. If no connection to the SQL server is produced, the software have to try to connect to the *.sdf database.I would like to achieve:
1. Export the data in the SQL Server 2008 R2 database to a local *.sdf file.
2. This *.sdf file has to work as an alternate connection string in the strongly typed dataset.
View 1 Replies
Dec 7, 2010
How can I write a connection string? I has four different computer that can be connect via ethernet.How can I maintain a inserting data if to computer insert on same table at a single time..??
View 1 Replies
Feb 29, 2012
I am tring to make the below application work with SQL Server 2005 Database Currently it works for test.mdb, which is in the same folder with the application. How shoud I modify the MapPath to work with SQL Server.
[Code]...
View 1 Replies
Feb 28, 2010
i have a app in visual basic mobile 2008, so i finish but now i need to tranfer the data generate in the in the app mobile to data base in sql server 2008.
View 1 Replies
