Switch Network SQL Server 2008 R2 Database To A Mobile SQL Server CE *.sdf File
Nov 2, 2011
I have developed a VB.NET program using a strongly typed dataset. This dataset has its connection to a SQL Server 2008 R2. The software should now be additionally used offline. The database should be exported to a *.sdf database. If no connection to the SQL server is produced, the software have to try to connect to the *.sdf database.I would like to achieve:
1. Export the data in the SQL Server 2008 R2 database to a local *.sdf file.
2. This *.sdf file has to work as an alternate connection string in the strongly typed dataset.
View 1 Replies
ADVERTISEMENT
May 29, 2012
I have an application I have developed which works great on individual PC's. However I've had some interest from a few customers that asked if I have a network version for site licencing.If my app did not save any data or write any reg entries, this might have been ok. But it does to the local computer. I also built in my own copy protection and trial function that stores data in the registry on the local computer.What would I need to do to enable my application to run on a server/network share, so that the only a serial number needed is for the server?
View 3 Replies
Feb 11, 2010
I want to connect To Database sql server via Network [code]...
View 2 Replies
Jul 14, 2010
I am using Microsoft visual basic 2010 and SQL server 2008.I develop a small database application and it run well on my pc.I built and distributed the application to other pc on the same network, but when I run the application from other pc I got error message like this:A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)[code]
View 2 Replies
Mar 17, 2011
i am doing project of Order Accepting system for five star hotels.Scenario is Waiter will accept order using Window Mobile which is Connected to WiFi present in hotel.I want to communicate to database(Sql Server) present on My Machine (Computer present in kitchen) through WiFi and Add order into table present inside database. This should notify my application present on Compter and should print order. After completion of Order Application from kitchen will notify to waiter about completion. My problem is How to Communicate with database present on Remote computer using WiFi from windows Mobile.
View 2 Replies
Aug 3, 2011
I'm having a issue connecting to a SQL server from a network drive. [URL]But i'm not sure how to give my assembly a strong name?
View 6 Replies
Sep 14, 2010
I am after some code that read several mailboxes on a particular server on the network and bring me back the date of the last mail within each one. Is this possible ?
View 2 Replies
Jan 3, 2010
I work as an IT Administrator and manage a few Servers, Routers, VPN Connections over a number if locations. What I am wanting to do is create a vb.net app that will go out and ping say every 2-5mins each of the servers, routers, that are listed and then shows beside the Hostname a Green Circle which means online and if its a Red Circle its offline, and the screen refreshes if their is a problem or a device / service comes back online.
Then if its offline email a particular email address showing the hostname of either the server or router and which location saying its offline. If possible to make it easier to change the devices to show possible have a txt file or something like that with the Hostname, IP Address, Location.
View 2 Replies
Dec 27, 2011
I'm trying to access a web server to download a file, but when I run the statement gives me the following WebException:
[Code]...
View 7 Replies
Aug 27, 2011
I am trying to create an application, which in first phase will read the content of an XML file, count the products, and copy the content of the XML to a sql server database TEMP table, which i have already created. I have already created the code to read the content of the XML file and view it in a datagrid view. But i dont know how i should copy the content to the database i have created....
The code i wrote till now:
Imports System
Imports System.Xml
Public Class FrmXMLRead
[code]....
I need to copy each product (code, category, subcategory, part_no, titlos, timi, availability, anakykl, lianiki) to the TEMP table of ABC databaseHow should i proceed to copy the data to a database ABC and table TEMP?
View 1 Replies
Jan 31, 2012
I have a machine which creates a new log file at the beginning of the day(12am) and updates the log file whenever there is any changes until the end of the day. How do I import the data in real time (30 sec, 1min or whenever there is any changes) to my SQL server database? Will SQL Server 2008 be able to access the active log file? If not will it be easier if I let my machine create a new log file whenever there is any updates? But if it is so, how do I import so many log files with different names in real time. (I must be able to scale the solution up to multiple machines).
View 3 Replies
Mar 12, 2009
how to load a .bak file of database backup in sql server 2005 using vb.net 2008 windows application?
View 5 Replies
Nov 18, 2009
Error message receiving A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) The project is written in VB.Net 2008. Production server uses SQL 2008, Dev Server uses SQL 2000. The application has been built and published.
Prod Connection String: strCN = "server=SGMAGNCPQ03.;Initial Catalog=APO_Tax;Integrated Security=True"
Dev Connection String: strCN = "server=S04423711940995.;Initial Catalog=APO_Tax;Integrated Security=True"
The Problem: When I change the connect string from dev back to prod and try to run my app, I get the above error message. If I reboot everything works fine but if I switch the connect string from prod to dev and try to go back to prod, I'm back to the same problem.
View 2 Replies
Jun 20, 2010
I would like to develop a very very very simple application which will connect the MS SQL SERVER in my notebook and will be run at hand terminal-with windows mobile 6.Here is the code which i used :
Dim strSQL As [String] = "SELECT COUNT(studentid) AS totalp from Students where gender='m' "
' Dim Conn As New SqlConnection("Data Source=10.0.0.4MUSTAFASQL2;Initial Catalog=MYDBX;User ID=TEACHERA") <<< i used this too,
' Dim Conn As New SqlConnection("Data Source=10.0.0.4:1433MUSTAFASQL2;Initial Catalog=MYDBX;User ID=TEACHERA;") <<< and also tried this[code].....
View 2 Replies
Jan 21, 2011
I have created my site using ASP.NET Personal Starter Kits 3.5. I use Visual Studio 2008 only . .with its built-in SQL Server (2005 Express) ... my database in App_Data is ASPNETDB.MDF ...I have created some of my tables also ....in ASPNETDB ..In my local PC the site was running fine ...But when I publish my site on production server it doesn't work and shows the following error
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
[code].....
View 2 Replies
Nov 30, 2009
1. Does someone know how to install Windows Mobile 6.5 SDK and how to get a Windows Mobile
6.5 emulator, like the 6.1 that comes with VS2008?
2. Planing to develop a server application that have a Windows mobile client.
I would like to pass commands to the server app on a server that trigger some event. Both made with VB2008. The WM65 client sould communicate on wifi LAN/TCPIP like a normal PC. I have never develop a client/server solution so does someone have links to some tutorial or tips on this. and/or Windows Mobile developmed in VB2008
View 5 Replies
Dec 7, 2010
How can I write a connection string? I has four different computer that can be connect via ethernet.How can I maintain a inserting data if to computer insert on same table at a single time..??
View 1 Replies
Mar 1, 2011
I've recently created my first serious Windows Service. It is a chat Server that can interact with a mobile Platform.Now If a Exception occurs in OnStart Sub you have no way of knowing there was an exception other than the misleading messagebox.I've Pinpointed the Exception to my fairly Simple log Class that Writes to a log file. Please look if you can see any obvious places where exceptions could occur. [code]
View 3 Replies
Feb 29, 2012
I am tring to make the below application work with SQL Server 2005 Database Currently it works for test.mdb, which is in the same folder with the application. How shoud I modify the MapPath to work with SQL Server.
[Code]...
View 1 Replies
Feb 28, 2010
i have a app in visual basic mobile 2008, so i finish but now i need to tranfer the data generate in the in the app mobile to data base in sql server 2008.
View 1 Replies
Mar 5, 2011
I have a little problem with application setting in VB.net 2008. I want to switch main server and backup server connection string with combobox. [Code] It did change the Application Setting connection string in the main form when combobox1 was changed. But the problem comes, when child form was called. On the child form there is DataGridView with Dataset using application connection string. Even the Backupserver was selected on the main form, child form dataset connection string doesn't change. I don't know how to pass the current connection string to child form dataset although it is set to use application setting.
View 6 Replies
Jun 23, 2011
Am using this code to connect to an SMS server to send sms to mobile phones but am getting stucked at the the bold like below:
[CODE]:.....................
View 1 Replies
Feb 25, 2011
I have a client/server application set up that the client sends a word file to the server and then the server converts that word file to a .TIF and sends the image back.The stuff I have now works.Say if I sent the size of the file and the actual file byte() to the server back to back, would the NetworkStream contain both back to back? This what I though would happen. So I implemented a kind of 'turn' based interaction during the duration of the conversion process.
[Code]...
View 4 Replies
Jun 6, 2012
I am trying to copy upload files to remote server i get below exception.[code]...
View 1 Replies
Jun 29, 2009
I have several programs that I wrote in Visual Basic.net 2003 that I run from a server at work. We upgraded to Visual Studio 2008 recently and I converted my code to that version. I rebuilt the .exes and tried to run it from the server. It said I needed to upgrade the framework on the server, which I did. Now when I run the .exe file from the server I get a runtime error:
Runtime Error!
Program: d:...
This application has requested the Runtime to terminate it in an unusual way. Please contact the applicaiton's support team for more information.
These programs are very important to the day-to-day operations of the company I work for. I did backup the software before converting it, so we're running normally right now, but there are modifications and upgrades I need to make as soon as possible, but cannot due to the programs crashing when I run the on the server.
View 1 Replies
May 18, 2009
I recently upgraded the MS SQL Server installed on my personal computer from 2005 Express to 2008 Express. Problem is when I try to add an SQL database file to a project using VS 2005 I get an error message saying that the version of my database server is not supported, I must have SQL Server 2005 Beta 2 or later installed. I didn't do it yet but I'm pretty sure that when I open the other projects that I included a database file to it, I'm going to get the same error.
My question is it possible to have two SQL Servers installed on my machine? If so, is it a good idea to have two DB servers in the same machine?
View 1 Replies
Jun 8, 2011
I work with vb.net I have a sqlServer database and i need to migrate to a DBF database.I know that a dbf file sctructure is a hexadecimal text file.I want to generate this file without a provider...building this file with this hexadecimal structure.
View 1 Replies
Feb 16, 2011
In my scenario, users are able to upload zip files to a.[url]....I would love to create a "daemon" which in specified time intervals will move-transfer any zip files uploaded by the users from a[url].....From the info i gathered so far,
The daemon will be an .ashx generic handler.
The daemon will be triggered at the specified time intervals via a plesk cron job
The daemon (thanks to SLaks) will consist of two FtpWebRequest's (One for reading and one for writing).
how could i implement step 3?
Do i have to read into to a memory() array the whole file and try to write that in b.example.com ?
How could i write the info i read to b[url].....?
Could i perform reading and writing of the file at the same time? No i am not asking for the full code, i just can figure out, how could i perform reading and writing on the fly, without user interaction.I mean i could download the file locally from a.example.com and upload it at b.example.com but that is not the point.
View 8 Replies
Feb 16, 2012
I want to use my SQL Server DB over a network. I have setup server client applications.The thing is for my current DB, I need to give it to server administrator who attaches the DB to SQLExpress instance and only then my network computers can access that.My question is, is there any way that my vb.net application could attach this DB through code at runtime, and DB gets all rights that are necessary to access it over the network?
I can attach DB using Create procedure but for this I need to know the sa password. Is there any way that I could achieve the same goal without sa passord and sa intervention?My only purpose is to enable my DB to be accessible over the network with all read /Write rights.
View 1 Replies
Aug 11, 2010
i'm tying to send email in my application directly by the smtp server but the server doesn't allow me to do that.The application its used by everyone in the company, so i set the smtp client UseDefaultCredentials to True, but the server replies with this when i try to send an email:[code].....If i set the credentials by hand, the server sends the email. So my problem is how to make this work to everyone? I don't want to have one public/friend var all time in the application with the credentials of the current user?
View 9 Replies
