2008 - Rename My Project?
Dec 24, 2011I'm using vb.net 2008. can I rename my project?
View 3 Replies
ADVERTISEMENT
Rename A VB 2008 Project?
May 31, 2010I have a VB 2008 project XYZ. It is in an XYZ folder. I want to keep it, but I also want a copy of it which I will call ABC which will be in the ABC folder. How do I do this? Just moving files to a new folder does not work. I have found a few places to make changes like the assembly name, but there seem to be many places and I haven't found them all. I found some old posts for earlier versions of VB but they are not applicable.
View 3 RepliesRename A Project In Program 2008?
Feb 2, 2010I would like to rename my project in VB2008 so I can resume and improve it.
View 3 RepliesVS 2008 Rename An Entire Project / Save As?
Feb 6, 2012I want to rework and rename an existing application and utilize everything I've already done -- but it looks like it isn't going to be that simple?One post suggested renaming the folder, plus the project and another subfolder but when I opened that folder there were another 7 or 8 files that also needed changing.I DON'T want to do anything that will create a conflict and if I'm going to change to newname from oldname, I don't want to see "oldname" popping up anywhere..Is there a safe way to rename and reuse an exisitng project? Without anything being left out ?
View 2 RepliesPossible To Rename The "Project" Folder In A Visual Studio 2010 Project?
Nov 22, 2010I have a VB.NET project in Visual Studio 2010 for an Excel Add-In.I use the "My" namespace,and in general it seems that the "My Project" folder contains configuration information about the project.My problem is that I need to change the name of this folder, because my version manager system won't accept spaces in file or folder names.Edit: There is a hacky way to do it, by renaming the folder and changing all references in the .vbproj file.However, the may work for a command line generation, but it won't work the next time the project will be opened in Visual Studio. The IDE will create a new "My Project" folder, and complain that it can't find the settings in it.
View 3 RepliesCan Rename An Entire Project / Solution
May 12, 2009I would like to know if there is any way that I can rename an entire project / solution.I created a project called say WindowsApp1, and then realized that I do not want that name, I'd like to rename it to something else.So I'd like to rename all references to WindowsApp1 throughout the project to another name.
View 9 RepliesCopy And Rename Project Folder?
Jul 10, 2011I did a project in VB for a class last week. This weeks project requires we add on to the last project. Is there a way to copy the whole project, then modify the copied version so I can keep the original?
View 1 Replies[2005] Rename VB Project Folder?
Mar 8, 2009Is it possible to rename a VB.Net 2005 Pro project folder?If I rename the folder then try to open the solution file it can't find any of the forms/modules, etc and there doesn't seem to be a way to rename it in vb itself.
View 3 RepliesFile I/O And Registry :: [VB2005]How To Rename Project
Dec 29, 2008I have completed my VB code and decided to publish it(make program an installable program). However, I want to rename my project so that when I publish it, the program will be the name I want. Now, my project is named as "Trial" when I first started. Now I want to change to "Monitor" due to some reasons. So it means having to renames all the files in that project as "Monitor" instead of "Trial".
View 6 RepliesVS 2010 Add - Append - Rename And Remove Project Resources During Run Time?
Aug 25, 2011How to add , append , rename and remove project resources during run time? How to get a list of all resources during run time? How to use project resources? (for ex. i added textfiles and images how can i open them?)
View 1 RepliesVS 2008 - Timer - Project A References Project B So Can Open A Large Form In Project B
May 5, 2010For reasons that are beyond my control, I have three Projects. Projects A and B reference project C. Project A references project B so that it can open a large form in project B. I now need to open that large form from project C, but VB won't allow me to add a reference from C to B because that would create a circular dependency. I found a way around it, though. I created a Timer in A, and when I opened C from A, I passed in that timer. When the user performs a certain action, I enable the Timer from A, and this causes C to open B for me.
View 2 RepliesVS 2008 Rename Other Window Name?
Feb 10, 2010I am looking for a way/code to change other programs Window Name.
View 25 RepliesAdd Project Setup Project For Project For Visual Studio 2008?
Nov 15, 2010i was developing Voice Chat Application in visual Basic .NET 2008 i try a lot methods to make installer for it :
1- i add Project Setup Project for my Project for Visual Studio 2008 Deploy & setup Type Projects and make it with output option and detect dependices
2- i try make it with Setup Factory 8.2.1
3- i try with MSI Factory 2.0
4 i try with Setup Factory 6.0
and after making installer copying it to my test virtual Machine or my friend lap and install it i get this error when try to run my application :
[Code]...
VS 2008 - Rename Files While Working With Them
Sep 27, 2009I am trying to change the file names of all the files in a directory based on content of the file. So I am opening the file, reading the content, storing the new file name in a variable and then trying to change the name of the file. This is not working because when I start this loop I am opening the file and viewing it so it won't allow me to change while the file is in use. Should I store the old and new file names in an array and do the renames after the For Next Loop is complete?
[Code]...
VS 2008 Rename Function Error
Aug 25, 2009I have no idea what its doing to me I didn't put any debug points in but it stops and goes to a highlighted line on my rename function.
View 9 RepliesVS 2008 - Rename All Files Inside Directory
Jul 12, 2009I am looking for a way to rename all JPG's inside a directory. So I'll pass it a directory (for example C:/PictureTest). It will then rename all JPG's inside that folder to something of my choosing.
View 3 RepliesVS 2008 File Compare And Copy Or Rename?
Nov 3, 2009I am helping a friend convert files from floppy to CD. The files are in WordPerfect for DOS (8.3)format. she named the files as follows: name.month eg; Baker.jan. if there were more than 1 "Baker" files in the same month she named them baker1.jan,Baker2.jan etc... She then copied them to floppies and when one got full she started another. The problem is I have multiple instances of the same filename on different disks so when I copy to my HD windows asks if I want to overwrite the files. I have been writing the names down and renaming them manually. Is there any way to automate this process? I would need to perform the following:
1. Check if floppy filename exists on HD already
2. if it doesn't, copy to HD
3. if it does, is it the same file or different file with the same name (file size has been a good indicator so far)
4.If it's the same =>ignore and go to next file on disk
5. if different, rename then copy to HD then go to next file
6. repeat until all files have been copied
I have 300+ disks to do this with and it is very time consuming.
VS 2008 How To Rename Multiple Files In A Directory
Feb 2, 2010I've been having for the past few hours? What I'm wanting to do is create a program which essentially removes a certain string from the filename in all files. So for example I have:
Picture_tankwithgun.jpg
Picture_bullet.jpg
Picture_randomclown.jpg
[code]......
VS 2008 Rename Files Inside A Folder?
Dec 21, 2009I have a folder that contains overs 1000 files,some files are sql script and others are text doument.I want to rename all the sql files and for the text documents,I want to replace a particular text by another text but opening each document and doing replaceAll requires lot of time
View 1 RepliesVS 2008 - Possible To Rename / Overwrite Temp Image File?
Nov 10, 2010Right now I upload a temp image file, delete the original, and then rename the temp to the original. Is there any way to rename without deleting first? I am doing this in a loop for a webcam program and when I delete the image, it shows a broken image if it is being veiwed right then. I wish I could allow it to overwrite when calling the rename. FYI, I have to upload a temp image first because if I upload the original, it will show as a broken image or partial at timed when being viewed.
View 1 RepliesVS 2008 Rename,Copy And Paste Directory Denied In Windows 7?
Jul 26, 2011So i have this code that will rename one of the folder:
FileIO.FileSystem.RenameDirectory("C:Program FilesYahoo!", "Yahoo!1")
but when I run the code..it say's: IOException was Unhandled
Access to the path 'C:Program FilesYahoo!' is denied.
I think the OS is the cause of the problem. because in Windows 7 it asks for permission to change the name.
How could i make the program to continue renaming when the log in user is administrator.
.net - VS 2008 Addin Copies And Renames Form Files, Gets Duplicate Members Errors Despite Rename
Jul 14, 2011I have a VB.NET project in Visual Studio 2008 that I created a specialized addin for. The addin prompts the user to select a database table, takes a template form class's files, copies them to another directory within the project, and renames the form class within the copied files. It then opens the new form and adds controls to it based on the fields in the database table.
The copying of the template form causes the background compiler to give 'duplicate member' errors, such as "Private Sub InitializeComponents(...) has multiple definitions with identical signatures," even though I renamed the files of the new form and the class name within them. Sometimes these errors go away before the new form is opened, but when they stick around the new form doesn't open correctly, and it throws an error instead. I implemented some code to wait until there are zero errors in the error list before trying to open the new form. This has helped sometimes, but for some reason sometimes the errors don't go away at all until the addin is closed.
How to copy the template form and rename the copy without the background compiler ever noticing duplicate members. If that's not possible, then perhaps someone has an alternative?
Here is my code that copies and renames the template form:
Private Sub CreateDataForm(ByVal tableName As String, ByVal displayName As String) ', ByVal subDataForms As IList(Of Object))
Try
Dim dataFormClassName As String = "frm" & MakeValidName(displayName)
Dim dataFormFileName As String = dataFormClassName & cVBSuffix
[CODE].......................
VS 2008 : Get Multiple Icons In A Project For Use With Shortcuts OUTSIDE The Project?
Nov 28, 2011How do i get multiple icons in a project for use with shortcuts OUTSIDE the project..
View 7 RepliesVS 2008 Export A File From One Project Directly Into Another Project?
Jun 28, 2009Is there a way that you can export a file from one project directly into another project?
For example, in one project i have a file called authInvalid.vb and i need to export it into another project?
Convert .NET 2005 Project To C# 2008 Project?
Jun 16, 2009Is there a tool to convert a VB.NET 2005 project to a C# 2008 project. I am trying to convert our project to VS 2008 and mostly port all the vb.NET code in some projects to C# 3.0/3.5.
View 6 RepliesVS 2008 How To Declare Things From BLL Project In UI Project
Apr 26, 2009i'm doing a program, and i'm working with a guy (he's kinda like a teacher) and he's teaching me tiered coding, UI, BLL and DAL.i've been taught to have the UI in one project, and the BLL in another, but they're in the same solution. pretty much i don't know how to declare things from the BLL project in the UI project.
View 1 RepliesVS 2008 Project Does Not Appear In Recently Viewed Project?
Jul 9, 2011I emptied the recently-viewed projects from the registry but now the project which I'm working on does not appear there even though I've opened it many times. How do I get the project to appear in recently-viewed projects?
View 5 RepliesHow To Close One Form In A Project And Note The Entire Project When Using Me.close() In Visual Studio 2008
Mar 22, 2010I am really new to Visual Studio and VB and I am having trouble closing a single form:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Me.Close()
End Sub
When I use Me.close() associated with this button it closes the entire project and not just the single form can anyone.
In-project Components Fail If Project Is Opened With In-project Component Used On Initially Open Form?
Dec 20, 2010Public Class ExtendedDateTimePicker Inherits DateTimePicker
View 5 RepliesInclude Contact Project Into Another Project / Add More Items To Database / Forms In New Project?
May 6, 2009I have a project that I have created, it something like a contact database.It is complete with its own sql server database, and controls and forms.I kinda of understand that I can include this project into another project.This is the tricky part,Can I include my contact project into another project and add more items to the database and forms in a new project?What I'm after is like using classes.My contact database would be like the base class, and the new project would be adding more features to that project.
View 10 Replies